[1] 孙承纬, 陆启生, 范正修, 等. 激光辐照效应[M]. 北京: 国防工业出版社, 2002.

    Sun Chengwei, Lu Qisheng, Fan Zhengxiu, et al. Laser irradiation effect[M]. Beijing: National Defense Industry Press, 2002.

[2] 陈根余， 余春荣， 李时春， 等. 脉冲激光修整青铜金刚石砂轮温度场的模拟与试验[J]. 中国激光, 2011, 38(7): 0703002.

    Chen Genyu，Yu Chunrong，Li Shichun，et al. Temperature field simulation and experiment for truing and dressing of bronze bonded diamond grinding wheel with pulsed laser[J]. Chinese J Lasers, 2011, 38(7): 0703002.

[3] 戴德平， 蒋小华， 蔡建鹏， 等. 激光熔覆Inconel 718 镍基合金温度场与应力场模拟[J]. 中国激光, 2015, 42(9): 0903005.

    Dai Deping, Jiang Xiaohua, Cai Jianpeng, et al. Numerical simulation of temperature field and stress distribution in Inconel 718 Ni base alloy induced by laser cladding[J]. Chinese J Lasers, 2015, 42(9): 0903005.

[4] 袁红， 赵剑衡， 谭福利， 等. 激光辐照下旋转柱壳温度场的数值模拟[J]. 强激光与粒子束, 2005, 17(5): 681-684.

    Yuan Hong, Zhao Jianheng, Tan Fuli, et al. Numerical simulation of temperature distribution on a rotational cylindrical shell under laser irradiation[J]. High Power Laser and Particle Beams, 2005, 17(5): 681-684.

[5] 梁建国， 倪晓昌， 杨丽， 等. 超短激光脉冲烧蚀铜材料的数值模拟[J]. 中国激光, 2005, 32(9): 1291-1294.

    Liang Jianguo, Ni Xiaochang, Yang Li, et al. Numerical simulation of the ablation on copper with ultrashort laser pulses[J]. Chinese J Lasers, 2005, 32(9): 1291-1294.

[6] 王晓东， 汪盛烈， 刘劲松. 高重复频率脉冲激光材料烧蚀的准真空环境效应[J]. 中国激光, 2009, 36(1): 238-243.

    Wang Xiaodong, Wang Shenglie, Liu Jinsong. Effect of quasi-vacuum environment in ablation with high repetition rate pulsed laser[J]. Chinese J Lasers, 2009, 36(1): 238-243.

[7] Chimier B, Tikhonchuk V T, Hallo L. Heating model for metals irradiated by a subpicosecond laser pulse[J]. Physical Review B, 2007, 75: 195124.

[8] 王贵兵， 罗飞， 刘仓理. 大气环境下重复频率激光辐照45#钢反射率变化分析[J]. 强激光与粒子束, 2006, 18(2): 181-183.

    Wang Guibing, Luo Fei, Liu Cangli. Reflectance change of 45# steel irradiated by laser in atmosphere[J]. High Power Laser and Particle Beams, 2006, 18(2): 181-183.

[9] Yilbas B S, Kalyon M. Repetitive laser pulse heating with a convective boundary condition at the surface [J]. Journal of Physics D, 2001, 34（2）: 222-231.

[10] 袁红， 谭福利， 王伟平， 等. 连续和重复频率激光对旋转壳体加热效率的数值模拟[J]. 强激光与粒子束, 2006, 18(12): 1975-1978.

    Yuan Hong, Tan Fuli, Wang Weiping, et al. Numerical simulation of heating efficiency comparison of CW laser and repeated frequency laser irradiating rotational shells[J]. High Power Laser and Particle Beams, 2006, 18(12): 1975-1978.

[11] 陶文铨. 传热学[M]. 西安: 西北工业大学出版社, 2006.

    Tao Wenquan. Heat transfer [M]. Xi′an: Northwesten Polytechnical University Press, 2006.

[12] 工程材料实用手册编缉委员会. 工程材料实用手册[M]. 北京: 中国计量出版, 1988: 208.

[13] 卡里卡, 戴斯蒙德. 工程传热学[M]. 北京: 人民教育出版社, 1981: 13.