基于X射线立体视觉的产品装配结构自动检测技术研究
韩跃平, 李瑞红. 基于X射线立体视觉的产品装配结构自动检测技术研究[J]. 激光与光电子学进展, 2013, 50(12): 121104.
Han Yueping, Li Ruihong. Study on Automatic Test of the Assembly Structures Inside Products Based on X-Ray Stereoscopic Vision[J]. Laser & Optoelectronics Progress, 2013, 50(12): 121104.
[1] 伍小燕, 于瀛洁, 吕丽军. 物体内部缺陷无损检测技术综述[J]. 激光与光电子学进展, 2013, 50(4): 040002.
[2] A Kobler, A Kashiwar, H Hahn, et al.. Combination of in situ straining and ACOM TEM: a novel method for analysis of plastic deformation of nanocrystalline metals[J]. Ultramicroscopy, 2013, 128: 68-81.
[3] S Bagavathiappan, B B Lahiri, T Saravanan. Infrared thermography for condition monitoring: a review[J]. Infrared Physics & Technology, 2013, 60: 35-55.
[4] 卢清华, 许重川, 王华, 等. 基于机器视觉的大幅面陶瓷地砖尺寸测量研究[J]. 光学学报, 2013, 33(3): 0312004.
[5] 陈剑钊, 林丹樱, 黄建衡, 等. 用于高分辨X射线显微镜的相衬方法研究进展[J]. 激光与光电子学进展, 2013, 50(6): 060004.
[6] Julio Molleda, Juan L Carus, Ruben Usamentiaga, et al.. A fast and robust decision support system for in-line quality assessment of resistance seam welds in the steelmaking industry[J]. Computers in Industry, 2012, 63(3): 222-230.
[7] Curtise K C Ng, Zhonghua Sun. Development of an online automatic diagnostic reference levels management system for digital radiography: a pilot experience[J]. Computer Methods and Programs in Biomedicine, 2011, 103(3): 145-150.
[8] 李进军, 赵宏. 基于特征面片的复杂型面轮廓视觉测量方法[J]. 光学学报, 2011, 31(8): 0812003.
[9] 向守兵, 苏光大, 陈健生, 等. 基于机器视觉的码坯异常检测与识别[J]. 光学学报, 2011, 31(7): 0715002.
[10] 董利明, 李加, 倪辰荫, 等. 基于光热调制检测发动机叶片疲劳裂纹的激光声表面波方法[J]. 中国激光, 2011, 38(11): 1103001.
[11] V Cnudde, M N Boone. High-resolution X-ray computed tomography in geosciences: a review of the current technology and applications[J]. Earth-Science Reviews, 2013, 123: 1-17.
[12] Han Yueping, Han Yan, Li Ruihong, et al.. Application of X-ray digital radiography to online automated inspection of interior assembly structures of complex products[J]. Nucl Instrum Meth Phys Res A, 2009, 604(3): 760-764.
韩跃平, 李瑞红. 基于X射线立体视觉的产品装配结构自动检测技术研究[J]. 激光与光电子学进展, 2013, 50(12): 121104. Han Yueping, Li Ruihong. Study on Automatic Test of the Assembly Structures Inside Products Based on X-Ray Stereoscopic Vision[J]. Laser & Optoelectronics Progress, 2013, 50(12): 121104.