[1] . . Drilling of narrow holes in metals by millisecond pulses of Nd∶YAG lasers[J]. Laser Physics, 1998, 8(2): 527-531.

[2] . . Processing of Ni-based aero engine components with repetitively Q-switched Nd∶YAG-lasers[J]. SPIE, 1996, 2789: 145-157.

[3] . . A technical review of the laser drilling of aerospace materials[J]. Journal of Materials Processing Technology, 1994, 42(1): 15-49.

[4] . Transition between nonthermal and thermal ablation of metallic targets under the strike of high-fluence ultrashort laser pulses[J]. Applied Physics Letters, 2006, 88: 094101-1.

[5] . . Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications[J]. Optics and Lasers in Engineering, 2005, 43(9): 937-950.

[6] . . Study of hole properties in percussion regime with a new analysis method[J]. JLMN-Journal of Laser Micro/Nanoengineering, 2007, 2(2): 128-132.

[7] . . Lensless digital holography with short-coherence light source for three-dimensional surface contouring of reflecting micro-object[J]. Optics Communications, 2007, 270(2): 176-179.

[8] . Laser pulse heating and phase changes in the irradiated region: temperature-dependent thermal properties case[J]. International Journal of Thermal Sciences, 2009, 48(4): 761-772.

[9] . Theoretical investigations on multiple-reflection and Rayleigh absorption-emission-scattering effects in laser drilling[J]. Applied Surface Science, 2009, 256(8): 2392-2399.

[10] SAMANT A N, DAHOTRE N B. Computational predictions in single-dimensional laser machining of alumina ［J］. International Journal of Machine Tools and Manufacture, 2008,48(12-13):1345-1353.

[11] NG G K L, CROUSE P L, LI L. An analytical model for laser drilling incorporating effects of exothermic reaction, pulse width and hole geometry ［J］. International Journal of Heat and Mass Transfer, 2006,49(7-8):1358-1374.

[12] 穆景阳，万红，白书欣. 长脉冲激光辐照下环氧树脂的热烧蚀规律［J］. 强激光与粒子束，2008，1(1):36-40.

    MU J Y, WAN H, BAI SH X. Thermal ablation law of cured epoxy under long pulse laser irradiation ［J］. High Power Laser and Particle Beams, 2008,1(1):36-40. (in Chinese)

[13] 蒋艳锋，江东，钟鸣，等. 长脉冲激光对金属材料热破坏的分析［J］. 激光杂志，2006，27(2):75-76.

    JIANG Y F, JIANG D, ZHONG M, et al.. Theoretical research: the thermal damage of metal materials, under millisecond-pulsed laser irradiations ［J］. Laser Journal, 2006,27(2):75-76. (in Chinese)

[14] . Reverse bulging and plugging in metal foil induced by high power laser[J]. Journal of Materials Science Letters, 2003, 22(1): 83-86.

[15] . . Interaction of a high-power laser beam with metal sheets[J]. Journal of Applied Physics, 2010, 107: 043016-1.

[16] 吴东江，马广义，周秋菊，等. 长脉宽脉冲激光硅片弯曲成形试验［J］. 光学 精密工程，2007，15(9):1361-1365.

    WU D J, MA G Y, ZHOU Q J, et al.. Experimental study of bending silicon chip with long pulse width laser［J］. Opt. Precision Eng., 2007,15(9):1361-1365. (in Chinese)

[17] ALLMEN M V. 激光束与材料相互作用的物理原理及应用［M］. 北京：科学出版社，1994.

    ALLMEN M V. Laser-beam Interactions with Materials Physical Principles and Applications ［M］. Beijing: Science Press, 1994. (in Chinese)

[18] . One-dimensional stead-state model for damage by vaporization and liquid expulsion due to laser-material interaction[J]. Journal of Applied Physics, 1987, 62(11): 4579-4586.

[19] . The role of recoil pressure in energy balance during laser materials processing[J]. Journal of Physics D:Applied Physics, 1997, 30(18): 2541-2552.

[20] . . Axisymmetric numerical simulation of plastic damage in aluminum alloy induced by long pulsed laser[J]. Optics and Lasers in Engineering, 2010, 48(3): 361-367.

[21] . . Mathematical modeling of laser induced heating and melting in solids[J]. Optics & Laser Technology, 2001, 33(8): 533-537.

[22] . . A melt depth prediction model for quality of laser surface glazing of inhomogeneous materials[J]. Optics & Laser Technology, 2001, 33(1): 7-13.

[23] . . A theoretical and experimental investigation on limitations of pulsed laser drilling[J]. Journal of Material Processing Technology, 2007, 183(1): 96-103.

[24] SOLANA P, KAPADIA P, DOWDEN J, et al.. Time dependent ablation and liquid ejection processes during the laser drilling of metals ［J］. Optics Communications, 2001,191(1-2):97-112.