[1] WANG C T, ZHAO L P, GU P C, et al. Defect analysis and preventing methods of 38CrMoAlA screw [J]. Journal of Zhejiang Ocean University (Natural Science Edition), 2007, 26(3): 300-302(in Chinese).

[2] LI G S. The manufacturing domestically of extruder screw rod part [J]. Science & Technology in Chemical Industry, 2006, 14(5): 22-25 (in Chinese).

[3] YANG Z J. Influencing factors of the wear of conical twin screw extruders and the method to reduce wear [J]. World Plastics, 2005, 23(5): 37-41 (in Chinese).

[4] ZHAO P, XIE F Z, SUN W S. Fundamentals of material science [M]. Harbin: Harbin Institute of Technology Press, 1999: 238-239 (in Chinese).

[5] LIN W S, ZHANG G J, WANG H P. Research progress of laser cladding technology [J]. Heat Treatment Technology and Equipment, 2008, 29(2): 1-3 (in Chinese).

[6] WANG W F, SUN F J, WANG M C. Study of Cu-base coating on aluminum alloy by laser cladding [J]. Laser Technology, 2008, 32(3):240-243 (in Chinese).

[7] HUANG D W, LI H B. Effects of laser power on the 38CrMoAl surface properties of laser cladding layer [J]. Journal of Liaoning Technical University (Natural Science Edition), 2000, 19(5): 539-542 (in Chinese).

[8] DING X Y, SUN X L. Research on technology of laser cladding Ni60 alloy on 38CrMoAl steel surface [J]. Foundry Technology, 2012, 32(11): 1528-1531 (in Chinese).

[9] SHAN J G, DING J C, REN J L. Microstructure and strengthening mechanism of light beam cladding layer with iron-based self-fluxing alloy powder [J]. Transactions of the China Welding Institution, 2001, 22(4): 1-4 (in Chinese).

[10] HUANG C B, DU L Z, ZHANG W G. Effects of solid lubricant content on the microstructure and properties of NiCr/Cr3C2-BaF2-CaF2 composite coatings [J]. Journal of Alloys and Compounds, 2009,479(1/2): 777-784.

[11] ZHANG X F, WANG A H. Microstructure and properties of laser clad nano-Ni encapsulated h-BN/CaF2 composite coating [J]. Journal of Huazhong University of Science & Technology(Natural Science Edition), 2009, 37(1): 9-13 (in Chinese).

[12] LIU X B, YU G, GUO J, et al. Study on microstructure and wear resistance of plasma jet clad γ-Cr7C3 composite coating [J]. Transactions of Materials and Heat Treat Mental, 2006, 27(12): 114-117 (in Chinese).

[13] CHEN Z Y, XU J, LIU W J. Study on microstructure and wear behaviors of MoS2/TiC/Ni composite wear-resistant coating by laser cladding [J]. Transactions of Materials and Heat Treat Mental, 2007, 28(s1): 253-258 (in Chinese).

[14] ZHANG D D, SHI Y, LIU J, et al. Research on controlling the crack in laser cladding of high hardness coating [J].Applied Laser, 2014, 34 (1):1-8 (in Chinese).

[15] WANG X, KWON P Y, SCHROCK D, et al. Friction coefficient and sliding wear of AlTiN coating under various lubrication conditions [J]. Wear, 2013, 304: 67-76.