等温贝氏体转变对CMnAl-TRIP钢残余奥氏体稳定性及力学性能的影响 下载: 925次
黄慧强, 邸洪双, 张天宇, 闫宁, 龚殿尧. 等温贝氏体转变对CMnAl-TRIP钢残余奥氏体稳定性及力学性能的影响[J]. 中国激光, 2019, 46(11): 1102004.
Huiqiang Huang, Hongshuang Di, Tianyu Zhang, Ning Yan, Dianyao Gong. Effects of Isothermal Bainite Transformation on Stability of Retained Austenite and Mechanical Properties of CMnAl-TRIP Steel[J]. Chinese Journal of Lasers, 2019, 46(11): 1102004.
[1] 环鹏程, 王晓南, 朱天才, 等. 800 MPa级热轧高强钢激光焊接接头的组织和力学性能[J]. 中国激光, 2019, 46(1): 0102002.
[2] 曹洋, 赵琳, 彭云, 等. 热输入对激光焊中锰钢接头组织和力学性能的影响[J]. 中国激光, 2019, 45(11): 1102008.
[3] 李学军, 黄坚, 潘华, 等. QP1180高强钢薄板激光焊接接头的组织与成形性能[J]. 中国激光, 2019, 46(3): 0302006.
[4] Buchely M F. Field D M, van Aken D C. Analysis of hot- and cold-rolled loads in medium-Mn TRIP steels[J]. Metallurgical and Materials Transactions, 2019, 50(3): 1180-1192.
[6] van SlyckenJ, VerleysenP, DegrieckJ, et al. Dynamic response of aluminium containing TRIP steel and its constituent phases[J]. Materials Science and Engineering:A, 2007, 460/461: 516- 524.
[7] Zackay V F, Parker E R, Fahr D, et al. The enhancement of ductility on high-strength steel[J]. Transactions of Applied Structures Mechanics, 1967, 60(2): 252-258.
[8] PichlerA, StiasznyP, PotzingerR, et al. TRIP steels with reduced Si content[C]∥40 th Mechanical Working and Steel Processing Conference. [S.l.: s.n.]1998: 259- 274.
[9] SugimotoK, ShimizuY, SakaguchiJ, et al. Microstructure and formability of high-strength TRIP-aided bainitic sheet steels[C]∥40th Mechanical Working and Steel Processing Conference Proceedings. [S.l.: s.n.]1998, 36: 275- 281.
[10] VriezeJ, VortrefflichW, BoelenB, et al. Annealing treatments for producing cold-rolled dual-phase and TRIP steels for automotive applications[C]∥41st Mechanical Working and Steel Processing Conference. [S.l.: s.n.]1999: 277- 294.
[11] YakubovskyO, FonsteinN, BhattacharyaD. Stress-strain behavior and bake hardening of TRIP and TRIP aided multiphase steels[C]∥International Conference on TRIP-Aided High Strength Ferrous alloys. [S.l.: s.n.]2002: 263- 270.
[12] PichlerA, TraintS, PauliH, et al. Processing and properties of cold-rolled TRIP steels[C]∥43rd Mechanical Working and Steel Processing Conference Proceedings. Warrendale; Iron & Steel Society, 2001: 411- 434.
[13] ZhaoL, Sietsma J,van der Zwaag S. Phase transformations and microstructural evolution in aluminium-containing TRIP steels[M] ∥Neumann P, Allen D, Teuckhoff E. Steels and materials for power plants. Weinheim: Wiley-VCH Verlag GmbH, 2000, 7: 77- 82.
[15] BhattacharyaD, FonsteinN, GirinaO, et al. A family of 590 MPa advanced high strength steels with various microstructures[C]∥Mechanical Working and Steel Processing Conference Proceedings. [S.l.: s.n.]2003, 41: 173- 186.
[16] Mahieu J, de Cooman B C, Maki J. Phase transformation and mechanical properties of Si-free CMnAl transformation-induced plasticity-aided steel[J]. Metallurgical and Materials Transactions A, 2002, 33(8): 2573-2580.
[17] 李林起, 姚成武, 黄坚, 等. 激光熔覆高硬度铁基涂层枝晶间残余奥氏体相特征[J]. 中国激光, 2017, 44(3): 0302011.
[18] Sakuma Y, Matlock D K, Krauss G. Intercritically annealed and isothermally transformed 0.15 Pct C steels containing 1.2 Pct Si-1.5 Pct Mn and 4 Pct Ni: Part I. Transformation, microstructure, and room-temperature mechanical properties[J]. Metallurgical Transactions A, 1992, 23(4): 1221-1232.
[19] 朱国明, 邝霜, 陈贵江, 等. 马氏体对C-Si-Mn冷轧双相钢屈服特性的影响[J]. 材料工程, 2011( 4): 66- 70.
Zhu GM, KuangS, Chen GJ, et al. Effect of martensite on yield characteristics of cold rolled C-Si-Mn dual phase steel[J]. Journal of Materials Engineering, 2011( 4): 66- 70.
[20] Matsuzaki A. Bhadeshia H K D H, Harada H. Stress affected bainitic transformation in a Fe-C-Si-Mn alloy[J]. Acta Metallurgica Et Materialia, 1994, 42(4): 1081-1090.
[21] 曾尚武, 赵征志, 赵爱民, 等. 贝氏体区等温温度对含钒TRIP800钢组织性能的影响[J]. 材料热处理学报, 2014, 35(1): 120-124.
[22] 施瀚超, 张学军, 陈云峰, 等. 贝氏体等温温度对含铝TRIP钢组织和性能的影响[J]. 热加工工艺, 2013, 42(16): 69-72.
[23] 康永林, 王波. TRIP钢板的组织、性能与工艺控制[J]. 钢铁研究学报, 1999, 11(3): 62-66.
[25] de MeyerM, VanderschuerenD, de Cooman BC. The influence of Al on the properties of cold rolled C-Mn-Si TRIP steels[C]∥41st Mechanical Working and Steel Processing Conference Proceedings. Warrendale: Iron & Steel Society, 1999, 37: 265- 276.
黄慧强, 邸洪双, 张天宇, 闫宁, 龚殿尧. 等温贝氏体转变对CMnAl-TRIP钢残余奥氏体稳定性及力学性能的影响[J]. 中国激光, 2019, 46(11): 1102004. Huiqiang Huang, Hongshuang Di, Tianyu Zhang, Ning Yan, Dianyao Gong. Effects of Isothermal Bainite Transformation on Stability of Retained Austenite and Mechanical Properties of CMnAl-TRIP Steel[J]. Chinese Journal of Lasers, 2019, 46(11): 1102004.