[1] 陈祖涛, 肖敏, 蒲万林 等. 薄小零件的选择性局部激光淬火［J］. 金属热处理, 1986, (10): 15～19

    Chen Zutao, Xiao Min, Pu Wanlin et al.. The selective laser hardening of thin, small parts［J］. Heat Treatment of Metals, 1986, (10): 15～19

[2] 周建忠, 樊玉杰, 黄舒 等. 激光微喷丸强化技术的研究与展望［J］. 中国激光, 2011, 38(6): 0601003

    Zhou Jianzhong, Fan Yujie, Huang Shu et al.. Research and prospect on micro-scale laser shot peening［J］. Chinese J. Lasers, 2011, 38(6): 0601003

[3] 樊玉杰, 周建忠, 黄舒 等. 激光微喷丸强化纯铜表面的纳米压痕分析［J］. 中国激光, 2011, 38(6): 0603026

    Fan Yujie, Zhou Jianzhong, Huang Shu et al.. Research on mechanical response of copper treated by micro laser shock peening using nanoindentation technique［J］. Chinese J. Lasers, 2011, 38(6): 0603026

[4] Hongqiang Chen, Y. Lawrence Yao, Jeffrey W. Kysar. Spatially resolved characterization of residual stress induced by micro scale laser shock peening［J］. J. Manuf. Sci. Engng., 2004, 126(2): 226～236

[5] W. Zhang, Y. L. Yao. Feasibility study of inducing desirable residual stress distribution in laser micromachining［J］. Transactions of the North American Manufacturing Research Institution of SME, 2001, 29: 413～420

[6] Wenwu Zhang, Y. Lawrence Yao, I. C. Noyan. Microscale laser shock peening of thin films, part 2: high spatial resolution material characterization［J］. J. Manuf. Sci. Engng., 2004, 126(1): 18～24

[7] Zhang Wenwu, Yao Y. Lawrence. Micro scale laser shock processing of metallic components［J］. J. Manuf. Sci. Engng., 2002, 124(2): 369～378

[8] Gao Y. X., Yi J. Z., Lee P. D. et al.. A micro-cell model of the effect of microstructure and defects on fatigue resistance in cast aluminum alloys［J］. Acta Mater., 2004, 52(19): 5435～5449

[9] Machinability Data Center, Metcut Research Associates. Machining Data Handbook［M］. Cincinati: Metcut Research Associates, 1972

[10] Arola D., Williams C. L.. Estimating the fatigue stress concentration factor of machined surfaces［J］. Int. J. Fatigue, 2002, 24(9): 923～930

[11] Y. B. Guo, R. Caslaru. Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti-6Al-4V surfaces［J］. J. Mater. Process. Technol., 2011, 211(4): 729～736

[12] Che Zhigang, Xiong Liangcai, Shi Tielin et al.. Experimental analysis of microscale laser shock processing on metallic material using excimer laser［J］. J. Mater. Sci. Technol., 2009, 25(6): 829～834

[13] Zhigang Che, Liangcai Xiong, Tielin Shi et al.. FEM calculation of microscale laser shock processing on MEMS material with excimer laser［J］. International Conference on Advanced Designand Manufaeture, 2008. 785～792