[1] 浦昭邦,陶卫, 张琢. 角度测量的光学方法[J].光学技术,2002,28(2): 168.

    Pu Zhaobang,Tao Wei, Zhang Zuo. Angle measurement with optical methods[J]. Optical Technique,2002,28(2): 168.

[2] 朱凡.基于共光路光束漂移测量与同步补偿的激光自准直技术[D]. 哈尔滨: 哈尔滨工业大学,2013: 3-8.

    Zhu Fan.Laser autocollimation technology based on common path beam drift measurement and synchronous compensation[D]. Harbin: Harbin Institute of Technology, 2013: 3-8.

[3] 黄银国,林玉池, 王为等. 基于矢量运算的光电自准直系统建模研究[J]. 激光与红外, 2009, 39(10): 1087-1088.

    Huang Yinguo,Lin Yuchi, Wang Wei, et al. Research on the model of photoelectric auto-collimating system based on vector operation[J]. Laser & Infrared, 2009, 39(10): 1087-1088.

[4] 张继友.基于新型光电传感器的动态自准直测量技术研究[D]. 北京: 中国科学院研究生院, 2006: 17.

    Zhang Jiyou.Study on dynamic photoelectric autocollimating measurement technology based on new photoelectric detectors[D]. Beijing: Graduate University of Chinese Academy of Sciences, 2006: 17.

[5] 潘汉军,刘娅. 光线反射过程的矩阵表达方法[J]. 应用光学, 2004, 25(4): 9-13.

    Pan Hanjun,Liu Ya. Matrix method to express the reflecting process of beam[J]. Appl. Optics, 2004, 25(4): 9-13.

[6] 白素平,王春艳, 庞春颖. 基于坐标变换的动态光学成像性质研究[J]. 光子学报, 2001, 30(7): 846-850.

    Bai Suping,Wang Chunyan, Pang Chunying. Imaging features of optics system in motion based on coordinate transformation[J]. Acta Photonica Sinica, 2001, 30(7): 846-850.

[7] 魏光辉.矩阵光学[M]. 北京: 兵器工业出版社, 1995: 26-38,50-56.

    Wei Guanghui.Matrix Optics[M]. Beijing: Ordnance Industry Press, 1995: 26-38, 50-56.

[8] 邹九贵,甘俊红, 季国定. 高精度二维自准直仪的研制[J]. 计测技术, 2006, 26(5): 19-20,26.

    Zou Jiugui,Gan Junhong, Ji Guoding. Research of a high accuracy two-axis autocollimator[J]. Metrology & Measurement Technology, 2006, 26(5): 19-20,26.

[9] 张继友,范天泉, 曹学东. 成像式光栅自准直测角方法研究[J]. 光电工程, 2006, 33(11): 49-51.

    Zhang Jiyou,Fan Tianquan, Cao Xuedong. Auto-collimation angular measurement method based on imaging grating[J]. Opto-Electronic Engin., 2006, 33(11): 49-51.

[10] 廉孟冬,金伟锋, 居冰峰. 二维光学自准直微角度传感器[J]. 机电工程, 2010, 27(12): 24-26.

    Lian Mengdong,Jin Weifeng, Ju Bingfeng. 2D micro-angle sensor based on laser autocollimation[J]. J. Mechanical & Electrical Engin., 2010, 27(12): 23-25.