[1] Palmer T A, Elmer J W, Brasher D, et al.. Development of an explosive welding process for producing high-strength welds between niobium and 6061-T651 aluminum[J]. Welding Journal, 2006, 85(11): 252-263.

[2] Ben- Artzy A, Stern A, Frage N, et al.. Interface phenomena in aluminium magnesium magnetic pulse welding[J]. Science and Technology of Welding and Joining, 2008, 13(4): 402-408.

[3] Crossland B. Explosive Welding of Metals and Its Application[M]. New York: Oxford University Press, 1982.

[4] Chizari M, Al-Hassani S T S, Barrett L M. Experimental and numerical study of water jet spot welding[J]. Journal of Materials Processing Technology, 2008, 198(1): 213-219.

[5] Turgutlu A, Al- Hassani S T S, Akyurt M. Experimental investigation of deformation and jetting during impact spot welding[J]. International Journal of Impact Engineering, 1995, 16(5): 789-799.

[6] Saotome Y, Iwazaki H. Superplastic backward microextrusion of microparts for microelectromechanical systems[J]. Journal of Materials Processing Technology, 2001, 119(1): 307-311.

[7] Vollertsen F, Hu Z, Niehoff H S, et al.. State of the art in micro forming and investigations into micro deep drawing[J]. Journal of Materials Processing Technology, 2004, 151(1-3): 70-79.

[8] Tanaka K A, Hara M, Ozaki N, et al.. Multi-layered flyer accelerated by laser induced shock waves[J]. Physics of Plasmas, 2000, 7(2): 676-680.

[9] Gao H, Ye C, Cheng G J. Deformation on behaviors and critical parameters in microscale laser dynamic forming[J]. Journal of Manufacturing Science and Engineering, 2009, 131(5): 051011.

[10] 王霄, 刘辉, 沈宗宝, 等. 激光驱动复合飞片加载金属箔板的成形能力[J]. 中国激光, 2013, 40(5): 0503006.

    Wang Xiao, Liu Hui, Shen Zongbao, et al.. Forming ability of the metal foil forming by laser-driven multi-layered flyer[J]. Chinese J Lasers, 2013, 40(5): 0503006.

[11] 刘会霞, 张强, 顾春兴, 等. 激光驱动飞片微塑性温成形实验研究[J]. 中国激光, 2014, 41(7): 0703011.

    Liu Huixia, Zhang Qiang, Gu Chunxing, et al.. Experimental investigation on warm micro-forming by laser-driven flyer[J]. Chinese J Lasers, 2014, 41(7): 0703011.

[12] Liu H, Wang H, Shen Z, et al.. The research on micro-punching by laser-driven flyer[J]. International Journal of Machine Tools and Manufacture, 2012, 54-55: 18-24.

[13] 陆萌萌, 刘会霞, 沈宗宝, 等. 激光驱动飞片复杂轮廓多孔微冲裁实验及模拟[J]. 中国激光, 2014, 41(4): 0403004.

    Lu Mengmeng, Liu Huixia, Shen Zongbao, et al.. Experiment and simulation of multihole micro-punching with complex layouts by laser-driven flyer[J]. Chinese J Lasers, 2014, 41(4): 0403004.

[14] Wang X, Yuan Y, Shen Z, et al.. Investigation of the forming pressure and formability of metal foil by laser-driven multi-layered flyer [J]. Optics & Laser Technology, 2014, 58: 151-160.

[15] Liu H, Shen Z, Wang X, et al.. Feasibility investigations on a novel micro-embossing using laser-driven flyer[J]. Optics & Laser Technology, 2012, 44(6): 1987-1991.

[16] 刘成海, 裴文兵, 颜军, 等. 金属蒸汽中的激光维持爆振波[J]. 高压物理学报, 1990, 4(2): 123-129.

    Liu Chenghai, Pei Wenbing, Yan Jun, et al.. Laser supported detonation waves in metal target vapor[J]. Chinese Journal of High Pressure Physics, 1990, 4(2): 123-129.

[17] Wang X, Zheng Y, Liu H, et al.. Numerical study of the mechanism of explosive/impact welding using smoothed particle hydrodynamics method[J]. Materials & Design, 2012, 35: 210-219.

[18] Bahrani A S, Black T J, Crossland B. The mechanics of wave formation in explosive welding[C]. Proceedings of the Royal Society of London-Series A, Mathematical and Physical Sciences , 1966, 296(1445): 123-136.

[19] Cowan G R, Bergman O R, Holtzman A H. Mechanism of bond zone wave formation in explosion-clad metals[J]. Metallurgical and Materials Transactions B, 1971, 2(11): 3145-3157.

[20] Robinson J L. A fluid model of impact welding[C]. Proceedings of the Fifth International Conference on High Energy Rate Fabrication, 1975, 31(1): 587-603.

[21] El-Sobky H, Blazynski T Z. Experimental investigation of the mechanics of explosive welding by means of a liquid analogue[C]. Proceedings of the Fifth International Conference on High Energy Rate Fabrication, 1975: 1-21.

[22] Lee K J, Kumai S, Arai T, et al.. Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding[J]. Materials Science & Engineering: A, 2007, 471(1-2): 95-101.

[23] Wang X, Gu C, Zheng Y, et al.. Laser shock welding of aluminum/aluminum and aluminum/copper plates[J]. Materials & Design, 2014, 56: 26-30.