[1] 唐 舵, 王春明, 田 曼, 等. SUS301L-HT不锈钢激光焊接与MIG焊接对比试验研究［J］. 中国激光, 2015, 42(7): 0703003.

    Tang Duo, Wang Chunming, Tian Man, et al. Contrasting study on quality of SUS301L-HT joints in fiber laser welding and MIG welding［J］. Chinese J Lasers, 2015, 42(7): 0703003.

[2] 李亚江, 王 娟, 夏春智. 特种焊接技术及应用［M］. 北京: 化学工业出版社, 2008: 16-50.

    Li Yajiang, Wang Juan, Xia Chunzhi. Special welding technology and its application［M］. Beijing: Chemical Industry Press, 2008: 16-50.

[3] 朱立红. 激光焊接线能量对不锈钢接头组织及性能影响的研究［D］. 长春: 吉林大学, 2014: 23-31.

    Zhu Lihong. Study on effects of laser welding heat input on microstructures and properties of stainless steel joints［D］. Changchun: Jilin University, 2014: 23-31.

[4] 李 耿, 张 林, 高 明, 等. 保护气体对不锈钢光纤激光焊接的影响［J］. 热加工工艺, 2011, 40(23): 126-129.

    Li Geng, Zhang Lin, Gao Ming, et al. Influence of shielding gas on fiber laser welding of stainless steel［J］. Hot Working Technology, 2011, 40(23): 126-129.

[5] 陈根余, 康 斌, 张 屹, 等. 光纤激光入射角对高强钢对接焊焊接性能的影响［J］. 中国激光, 2012, 39(1): 0103008.

    Chen Genyu, Kang Bin, Zhang Yi, et al. Effects of incident angle on welding performance of fiber laser butt welding of high-strength automobile steel［J］. Chinese J Lasers, 2012, 39(1): 0103008.

[6] 邹江林. 高功率光纤激光深熔焊接特性研究［D］. 北京: 北京工业大学, 2014: 19-28.

    Zou Jianglin. Investigation on characterization of deep penetration welding with high power fiber laser welding［D］. Beijing: Beijing University of Technology, 2014: 19-28.

[7] 韩 宁, 张寰臻, 肖荣诗, 等. 激光深熔焊接阈值表征及特性［J］. 中国激光, 2008, 35(2): 311-315.

    Han Ning, Zhang Huanzhen, Xiao Rongshi, et al. Threshold characterization for laser penetration welding［J］. Chinese J Lasers, 2008, 35(2): 311-315.

[8] 夏胜全, 何建军, 王 巍, 等. 激光深熔焊焊熔池三维瞬态行为数值模拟［J］. 中国激光, 2016, 43(11): 1102004.

    Xia Shengquan, He Jianjun, Wang Wei, et al. Simulation of three-dimensional transient behavior of molten pool in laser deep penetration welding［J］. Chinese J Lasers, 2016, 43(11): 1102004.

[9] Kroos J, Gratzke U, Simon G. Towards a self-consistent model of the keyhole in penetration laser beam welding［J］. Journal of Physics D: Applied Physics, 1993, 26(3): 474-480.

[10] Dowden J, Kapadia P. A mathematical investigation of the penetration depth in keyhole welding continuous CO2 laser［J］. Journal of Physics D: Applied Physics, 1995, 28(11): 2252-2261.

[11] 史春元, 顾国晨, 王洪潇, 等. 不锈钢车体非熔透激光搭接焊热源模型［J］. 焊接学报, 2011, 32(5): 82-85.

    Shi Chunyuan, Gu Guochen, Wang Hongxiao, et al. Heat source model for partial penetration lap welding of stainless steel railway vehicles［J］. Transactions of the China Welding Institution, 2011, 32(5): 82-85.

[12] 刘 佳. 轨道客车用SUS301L奥氏体不锈钢激光叠焊技术研究［D］. 长春: 长春理工大学, 2011: 23-47

    Liu Jia. Research on laser lap welding technology of SUS301L austenitic stainless steel for railway vehicles［D］. Changchun: Changchun University of Science and Technology, 2011: 23-47.