[1] 林志强, 王天友, 南刚雷, 等.基于线结构光的柴油机缸盖三维形貌测量［J］.光电工程, 2014, 41(5): 46-51.

    LIN ZHIQIANG, WANG TIANYOU, NAN GANGLEI, et al.Three-dimensional data measurement of engine cylinder head blank based on line structured light［J］.Opto-Electronic Engineering, 2014, 41(5): 46-51.

[2] 黄风山, 陈丽, 任有志, 等.连铸坯线结构光视觉定重方法［J］.光电工程, 2015, 42(8): 27-33.

    HUANG FENGSHAN, CHEN LI, REN YOUZHI, et al.A vision weight method of billet based on linear structure laser［J］.Opto-Electronic Engineering, 2015, 42(8): 27-33.

[3] 刘宝龙, 孙萍, 陈桦, 等.义齿窝洞预备体三维重构关键技术研究［J］.西安工业大学学报, 2016, 36(1): 26-30.

    LIU BAOLONG, SUN PING, CHEN HUA, et al.Research on 3D model reconstruction for cavity preparation based on laser triangulation［J］.Journal of Xi′an Technological University, 2016, 36(1): 26-30.

[4] 徐永安, 杨钦, 怀进鹏.激光旋转扫描测量系统中转轴标定及多视拼合［J］.中国激光, 2005, 32(5): 659-662.

    XU YONGAN, YANG QIN, HUAI JINPENG.Calibration of the axis if the turntable in 4 axis laser measuring system and registration of multi view［J］.Chinese Journal of Lasers, 2005, 32(5): 659-662.

[5] NIOAL V, ROSSI C, SAVINO S, et al.A method for the calibration of a 3-D laser scanner［J］.Robotics and Computer-Integrated Manufacturing, 2011, 27(2): 479-484.

[6] 张旭, 周涛.平顶线结构光的中心检测算法及光刀平面标定［J］.光子学报, 2017, 46(5): 51-59.

    ZHANG XU, ZHOU TAO.Center detection algorithm and knife plane calibration of flat top line structured light［J］.Acta Photonica Sinica, 2017, 46(5): 51-59.

[7] 洪磊, 田啟良, 嵇宝健.基于单应性矩阵的线结构光参量标定法［J］.光子学报, 2015, 44(12): 107-112.

    HONG LEI, TIAN QILIANG, JI BAOJIAN.Calibration method for line structured-light parameters based on homography matrix［J］.Acta Photonica Sinica, 2015, 44(12): 107-112.

[8] 陈天飞, 赵吉宾, 吴翔.基于共面靶标的线结构光传感器标定新方法［J］.光学学报, 2015, 35(1): 172-180.

    CHEN TIANFEI, ZHAO JIBIN, WU XIANG.New calibration method for line structured light sensor based on planar target［J］.Acta Optica Sinica, 2015, 35(1): 172-180.

[9] 李冠楠, 谭庆昌, 寇莹, 等.一字线结构光三维测量模型的新型标定方法［J］.光子学报, 2013, 42(11): 1334-1339.

    LI GUANNAN, TAN QINGCHANG, KOU YING, et al.A new method for calibrating line structured-light 3D measurement model［J］.Acta Photonica Sinica, 2013, 42(11): 1334-1339.

[10] TRAN T T, HA C.Extrinsic calibration of a camera and structured multi-line light using a rectangle［J］.International Journal of Precision Engineering & Manufacturing, 2018, 19(2): 195-202.

[11] WENDEL A, UNDERWOOD J.Extrinsic parameter calibration for line scanning cameras on ground vehicles with navigation systems using a calibration pattern［J］.Sensors, 2017, 17(11): 2491.

[12] 赖瀚轩, 张征宇, 朱龙, 等.基于直线特征的摄像机非线性畸变自校正［J］.激光与光电子学进展, 2016, 53(2): 140-146.

    LAI HANXUAN, ZHANG ZHENGYU, ZHU LONG, et al.Nonlinear distortion correction of camera based on linear characteristic［J］.Laser & Optoelectronics Progress, 2016, 53(2): 140-146.

[13] 胡明勇, 李明杰, 赵奇, 等.大视场针孔物镜设计及成像畸变校正［J］.光学学报, 2017, 37(5): 274-280.

    HU MINGYONG, LI MINGJIE, ZHAO QI, et al.Design and imaging distortion correction of pin-hole objective lens with large field［J］.Acta Optica Sinica, 2017, 37(5): 274-280.