[1] XIANG NAN,XIN XIANZHEN．Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting［J］．Journal of Dentistry,2012(40): 453-457．

[2] BIAO Z,HUANG Q．Preliminaru study on some properties of Co-Cr dental alloy formed by selective laser melting technique［J］．Journal of Wuhan University of Tech-nology-Mater,2012,27(4): 665-668．

[3] QIU J,YU W Q,et al．Corrosion Behavior and Surface Analysis of a Co-Cr and two Ni-Cr Dental Alloys Before and after Simulated Porcelain Firing［J］．Eur. J. Oral. Sci.,2011(119): 93-101．

[4] 孙莹莹,黄玮．选择性激光加工技术在口腔医学领域的应用进展［J］．广东牙病防治,2014,22(2): 109-112．

[5] 陈建宇,张志光,李子夫．选择性激光熔化技术在口腔医学领域中的应用［J］．国际口腔医学杂志,2014,41(1): 97-101．

[6] OVER C,MEINERS W,WISSNBACH K,et al． Selective laser melting: a new approach for the direct manufacturing of metal parts and tools［R］．Frankfurt: 1st International Conference on Laser assisted Net Shape Engineering,2001．

[7] KRUTH,J P,MERCELIS P,et al．Binding mechanisms in selective laser sintering and melting［J］．Rapid Prototyping Journal,2005,11(1): 26-36．

[8] WONG M,OWEN I,SUTCLIFFE C J,et al．Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting［J］．International Journal of Heat and Mass Transfer,2009(52): 281-288．

[9] 刘睿诚,杨永强,黄延录,等．选区激光熔化成型金属零件上表面粗糙度的研究［J］．激光技术,2013,37(4): 425-430．

[10] 陈光霞,王泽敏,关凯,等．工艺参数对SLM激光快速成型件表面粗糙度的影响［J］．制造技术与机床,2009(12): 86-89．

[11] BEN VANDENBROUCKE,JEAN-PIERRE KRUTH．Selective laser melting of biocompatible metals for rapid manufacturing of medical parts［J］ ．Rapid Prototyping Journal,2007,13(4): 196-203．

[12] KRUTH J,YASAE,DECKERS J．Roughness improvement in selective laser melting: Proceedings of the 3rd International Conference on Polymers and Moulds.［C］．Gent,Belgium: Ku Leuven,2008: 170-183．

[13] 王迪,杨永强,黄延禄,等．选区激光熔化直接成型金属零件致密度的改善［J］．华南理工大学学报(自然科学版),2010,38(6): 107-111．

[14] SANTOS E C,O SAKADA O K,SHIOMI M,et al．Microstructureand mechanical properties of pure titanium models fabricated by selective lasermelting ［J］．Journal of Mechanical Engineering Science,2004,218(7): 711-719．

[15] GU D,MENG G,LI C．Selective laser melting of TiC/Ti bulk nanocomposites: Influence of nanoscale reinforcement［J］．Scripta Materialia,2012,67(2): 185-188．