[1] PETRIC M, MEDVED J, MRVAR P.Effect of the grain refinement, modification and the cooling rate onmicrostructure of the AlSi10Mg alloy［J］.Materials and Geoenvironment, 2006, 53(3): 385.

[2] BRODARAC Z, MRVAR P, MEDVED J, et al.Local squeezing casting influence on the compactness of AlSi10Mg alloy castings［J］.Metalurgija, 2006, 46(1): 29-35.

[3] LU L, NOGITA K, DAHLE A K.Combining Sr and Na additions in hypoeutectic Al-Si foundry alloys［J］.Materials Science and Engineering: A, 2005, 399(1): 244-253.

[4] KARAKOSE E, KESKIN M.Effect of solidification rate on the microstructure and microhardness of a melt-spun Al-8Si-1Sb alloy［J］.Journal of Alloys and Compounds, 2009, 479(1): 230-236.

[5] TIAN ZONGJUN, GU DONGDONG, SHEN LIDA, et al.Application and development of laser additive manufacturing technology in aeronautics and astronautics［J］.Aeronautical Manufacturing Technology, 2015(11): 38-42.

[6] LI NIANKUI, LING GAO, NIE BO, et al.Aluminum alloy material and heat treatment technology［M］.Beijing: Metallurgical Industry Press, 2012: 1-2.

[7] GAO SHIYOU, LI JIAN, LI CHENGUANG, et al.Research on the variation regularity of single laser tracks corss-section Morphology during laser cladding［J］.Chinese Journal of laser, 2013(5): 118-124.

[8] HUANG XIAOWEI, XI JUNTONG, LEBRUN J L, et al.Influence of processing parameters on geometric characterizations of laser cladding forming 316L stainless steel［J］.Laser & Optoelectronics Progress, 2011(7): 117-122..

[9] LI PENG.Direct laser fabrication of 3-dimentional metal parts based on laser cladding［D］.Wuhan: Huazhong University of Science and Technology, 2005.

[10] SHEN YANDI.The fundamental investigation on laser cladding process［D］.Shanghai: Shanghai Maritime University, 2006.

[11] WANG ZHIJIAN.Research of geometric characteristic and shaping control of formed structure in laser remanufacturing equipment parts［D］.Guangzhou: South China University of Technology, 2011.

[12] SONG JIANLI, LI YONGTANG, DENG QILIN, et al.Research progress of laser cladding forming technology［J］.Journal of Mechanical Engineering, 2010(14): 29-39.

[13] HUANG XIAOFENG.An investigation on microstructure and properties of Ni-based alloy by laser cladding and laser cladding forming［D］.Jilin: Jilin University, 2011.

[14] LIU HAO, YU GANG, HE XIULI, et al.Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding［J］.Chinese Journal of Lasers, 2013(12): 84-91.

[15] ABBAS G, WEST D R F.Laser surface cladding of stellite and stellite-SiC composite deposits for enhanced hardness and wear［J］.Wear, 1991, 143(2): 353-363.

[16] PARTES K, SEEFELD T, SEPOLD G, et al.Increased efficiency in laser cladding by optimization of beam intensity and travel speed［C］//EPIC/SPIE Workshop on laser applications in Europe. International Society for Optics and Photonics, 2005: 61570O-61570O-11.

[17] ZHANG CHUNHUA, ZHANG NING, ZHANG SONG, et al.Simulation of laser cladding temperature field on surface of 6061 Al alloy［J］.Journal of Shenyang University of Technology, 2007(3): 267-270.

[18] ZHAO HAIILNG.Numerical simulation of temperature field and flow field during laser cladding of molten pool［D］.Qinhuangdao: Yanshan University, 2013.

[19] LIU ZHENFENG.3D FEM numerical simulation on the temperature field of laser cladding by powder injection［D］.Wuhan: Huazhong University of Science and Technology, 2006.

[20] KUMAR A, ROY S.Effect of three-dimensional melt pool convection on process characteristics during laser cladding［J］.Computational Materials Science, 2009, 46(2): 495-506.

[21] LIU ZHENJIA. Modeling and numerical simulation on laser remelting and cladding［D］. Xi'an: Northwestern Polytechnic University, 2003.

[22] CHEN ZHONG.Temperature measurement of molten pool in laser cladding process［D］.Suzhou: Soochow University, 2006.

[23] LI CHENGUANG.Research on the geometrical model of cross-section morphology of single laser cladding by powder injection［D］.Qinhuangdao: Yanshan University, 2014.

[24] LI MEIYAN, CAI CHUNBO, HAN BIN, et al.Numerical simulation of preheating on temperature and stress fields by laser cladding Ni-based ceramic coating［J］.Transaction of Materials and Heat Treatment, 2015(12): 197-203.

[25] ONWUBOLU G C, DAVIM J P, OLIVEIRA C, et al.Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search［J］.Optics & Laser Technology, 2007, 39(6): 1130-1134.

[26] ZHANG QINMAO, ZHONG MINLIN, YANG SEN, et al.Dilution control of broad-beam laser clad coating by powder feeding method［J］.Heat Treatment of Metals, 2001(8): 20-23.