[1] Zhang X H, Liu D X. Influence of surface coating on Ti811 alloy resistance to fretting fatigue at elevated temperature[J]. Rare Metals, 2009, 28(3): 266-271.

[2] Bhaumik S K, Rangaraju R, Venkataswamy M A, et al. Fatigue fracture of crankshaft of an aircraft engine[J]. Engineering Failure Analysis, 2002, 9(3): 255-263.

[3] 王彦芳, 肖丽君, 刘明星, 等. 激光熔覆制备非晶复合涂层的研究进展[J]. 激光与光电子学进展, 2014, 51(7): 070002.

    Wang Y F, Xiao L J, Liu M X, et al. Research progress of laser cladding amorphous coatings[J]. Laser & Optoelectronics Progress, 2014, 51(7): 070002.

[4] 李嘉宁, 巩水利, 单飞虎, 等. 航空钛合金表面激光熔覆Ti3Al基复合涂层的组织性能分析[J]. 航空制造技术, 2013( 16): 76- 80, 84.

    Li J N, Gong S L, Shan F H, et al. Analysis of microstructure performance of laser clad Ti3Al matrix composite coating on aviation titanium alloy[J]. Aeronautical Manufacturing Technology, 2013(16): 76-80, 84.

[5] 朱知寿. 新型航空高性能钛合金材料技术研究与发展[M]. 北京: 航空工业出版社, 2013.

    Zhu ZS. Research and development of new-brand titanium alloys of high performance for aeronautical applications[M]. Beijing: Aviation Industry Press, 2013.

[6] 张喜燕, 赵永庆, 白晨光. 钛合金及应用[M]. 北京: 化学工业出版社, 2005.

[7] 李瑞峰. 镍基非晶复合涂层的半导体激光制备及表征[D]. 上海: 上海交通大学, 2013.

    Li RF. Synthesis and characterization of Ni-based amorphous composite coating using diode laser processing[D]. Shanghai: Shanghai Jiao Tong University, 2013.

[8] 赵永庆, 陈永楠, 张学敏, 等. 钛合金相变及热处理[M]. 长沙: 中南大学出版社, 2012.

    Zhao YQ, Chen YN, Zhang XM, et al.Phase transformation and heat treatment of Titanium alloys[M]. Changsha: Central South University Press, 2012.

[9] 孙峰. Ti60钛合金相变动力学及组织演变研究[D]. 西安: 西北工业大学, 2015.

    SunF. Investigation of phase transformation kinetics and microstructure evolution in Ti60 alloy[D]. Xi'an:Northwestern Polytechnical University, 2015.

[10] Chen H, Zhou H M, Zou Y. Synthesis of ultrafine crystal/nanocrystalline TiAl-based alloy by in situ sintering[J]. Rare Metal Materials and Engineering, 2015, 44(10): 2387-2390.

[11] 闫英杰. 沉淀强化奥氏体不锈钢焊件氢脆研究[D]. 北京: 北京科技大学, 2015.

    Yan YJ. Study of hydrogen embrittlement of precipitation strengthened austenitic stainless steel weldment[D]. Beijing: University of Science and Technology Beijing, 2015.

[12] 周海萍. Ti弥散强化超细晶AZ31镁合金制备与组织性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2016.

    Zhou HP. Fabrication and properties of ultrafine-grained AZ31 magnesium alloys strengthened with Ti dispersions[D]. Harbin: Harbin Institute of Technology, 2016.

[13] 黄伯云. 钛铝基金属间化合物[M]. 长沙: 中南工业大学出版社, 1998.

[14] 高雪松, 黄因慧, 田宗军, 等. 钛合金表面激光熔覆等离子体喷涂Al2O3+13%TiO2涂层冲蚀磨损性能[J]. 中国激光, 2010, 37(3): 858-862.

    Gao X S, Huang Y H, Tian Z J, et al. Erosive wear resistance behavior of laser cladding Al2O3+13%TiO2 coating prepared by plasma spraying on titanium alloy surface[J]. Chinese Journal of Lasers, 2010, 37(3): 858-862.

[15] 郭纯, 陈建敏, 姚润钢, 等. 激光熔覆原位制备Ti3Al金属间化合物涂层结构及摩擦学性能[J]. 摩擦学学报, 2013, 33(1): 14-21.

    Guo C, Chen J M, Yao R G, et al. Microstructure and tribological properties of Ti3Al intermetallic compound coating by laser cladding[J]. Tribology, 2013, 33(1): 14-21.

[16] 居毅, 郭绍义, 陈生钻, 等. 激光镍包纳米Al2O3增强复合涂层的摩擦磨损性能研究[J]. 摩擦学学报, 2007, 27(1): 50-53.

    Ju Y, Guo S Y, Chen S Z, et al. Tribological properties of Ni-clad nano-Al2O3 composite coatings by high-energy laser irradiation[J]. Tribology, 2007, 27(1): 50-53.