[1] 杜云飞, 刘波, 胡炳樑,等. 一种全帧型CCD航空相机像移补偿方法[J]. 光子学报, 2007, 36(12): 2334-2336.

    Du Yunfei, Liu Bo, Hu Bingliang, et al. A compensation method of image motion in full-frame CCD aerial camera[J]. Acta Photonica Sinica, 2007, 36(12): 2334-2336. (in Chinese)

[2] 傅承毓, 姜凌涛. 快速反射镜成象跟踪系统[J]. 光电工程, 1994(3): 1-8.

    Fu Chengyu, Jiang Lingtao. Image tracking system with a fine-steering-mirror[J]. Opto-Electronic Engineering, 1994(3): 1-8. (in Chinese)

[3] Loney G C. Design of a high-bandwidth steering mirror for space-based optical communications[C]//Active and Adaptive Optical Components. International Society for Optics and Photonics, 1992.

[4] 徐新行, 杨洪波, 王兵,等. 快速反射镜关键技术研究[J]. 激光与红外, 2013, 43(10):1095-1103.

    Xu Xinhang, Yang Hongbo, Wang Bin, et al. Research on key technology of fast-steering mirror[J]. Laser & Infrared, 2013, 43(10): 1095-1103. (in Chinese)

[5] 秦承运, 沙巍, 张星祥,等. 针对温度影响的空间反射镜局部面形优化[J]. 光电工程, 2015, 42(2): 28-34.

    Qin Chengyun, Sha Wei, Zhang Xingxiang, et al. Optimization of local space mirror surface shape influenced by temperature[J]. Opto-Electronic Engineering, 2015, 42(2): 28-34. (in Chinese)

[6] 包奇红, 沙巍, 陈长征,等. 中心支撑长条形反射镜轻型优化设计[J]. 红外与激光工程, 2017, 46(7): 0718003.

    Bao Qihong, Sha Wei, Chen Changzheng, et al. Lightweight and optimization design of rectangular reflective mirror supported in centre[J]. Infrared and Laser Engineering, 2017, 46(7): 0718003. (in Chinese)

[7] 王富国. 温度和支撑方式对1.2 m SiC主镜面形的影响分析[J]. 光子学报, 2011, 40(6): 933-936.

    Wang Fuguo. Analysis of influence of temperature and supporting methods on 1.2 m SiC primary mirror surface figure[J]. Acta Photonica Sinica, 2011, 40(6): 933-936. (in Chinese)

[8] 李福, 阮萍, 赵葆常,等. 胶固紧平面反射镜的有限元分析[J]. 光学技术, 2006, 32(6): 896-899.

    Li Fu, Ruan Ping, Zhao Baochang, et al. Finite element analysis of the plane mirror fastened by adhesive[J]. Optical Technique, 2006, 32(6): 896-899. (in Chinese)

[9] 王汝冬, 田伟, 王平,等. 温度变化对胶粘结透镜面形精度的影响[J]. 中国激光, 2011, 38(8): 201-206.

    Wang Rudong, Tian Wei, Wang Ping, et al. Effect of temperature change on the surface accuracy of bonded lens[J]. Chinese Journal of Lasers, 2011, 38(8): 201-206. (in Chinese)

[10] 闫勇, 金光, 杨洪波. 空间反射镜结构轻量化设计[J]. 红外与激光工程, 2008, 37(1): 97-101.

    Yan Yong, Jin Guang, Yang Hongbo. Lightweight structural design of space mirror[J]. Infrared and Laser Engineering, 2008, 37(1): 97-101. (in Chinese)

[11] 曹天捷. 圆薄板轴对称弯曲问题的基本方程讨论[J]. 力学与实践, 2016, 38(4): 442-448.

    Cao Tianjie. Discussions on the fundamental equations for axisymmetric thin circular plates[J]. Mechanics in Engineering, 2016, 38(4): 442-448. (in Chinese)

[12] 徐新行, 王兵, 乔健,等. 快反系统中平面反射镜的轻量化设计[J]. 中国光学, 2012, 5(1): 35-41.

    Xu Xinhang, Wang Bin, Qiao Jian, et al. Lightweight design of mirror in fast-steering mirror system[J]. Chinese Optics, 2012, 5(1): 35-41. (in Chinese)

[13] 谭进国, 何欣, 付亮亮. 小型反射镜中心支撑技术[J]. 红外与激光工程, 2010, 39(6): 1070-1074.

    Tan Jinguo, He Xin, Fu Liangliang. Support technique in centre of minitype reflector[J]. Infrared and Laser Engineering, 2010, 39(6): 1070-1074. (in Chinese)

[14] 董得义, 李志来, 李锐钢, 等. 胶层固化对反射镜面形影响的仿真与试验[J]. 光学 精密工程, 2014, 22(10): 2698-2707.

    Dong Deyi, Li Zhilai, Li Ruigang, et al. Simulation and experiment of influence of adhesive on reflective mirror surface[J]. Optics and Precision Engineering, 2014, 22(10):2698-2707. (in Chinese)

[15] 包奇红, 沙巍, 陈长征,等. 空间SiC反射镜背部中心支撑特性[J]. 光子学报, 2017, 46(2): 22-31.

    Bao Qihong, Sha Wei, Chen Changzheng, et al. Characteristics of rear support in centre for space SiC mirror[J]. Acta Photonica Sinica, 2017, 46(2): 22-31. (in Chinese)