[1] 朱小蓉, 沈惠平, 余竹青,等. 三自由度并联机构坐标测量机的样机研制［J］. 制造技术与机床, 2010(1)：67-71.

    ZHU X R, SHEN H P, YU ZH Q, et al.. Study and development of a coordinate measuring with 3-DOF parallel link ［J］.Manufacturing Technology and Machine Tool, 2010(1):67-71.(in Chinese)

[2] 陈修龙, 赵永生, 鹿玲. 新型并联机器人坐标测量机仿真建模的实现［J］. 光学 精密工程,2006,14(6):1025-1031.

    CHEN X L, ZHAO Y SH, LU L. Research or novel parallel robot coordinate measuring machine simulation modeling ［J］.Opt. Precision Eng.,2006,14(6):1025-1031. (in Chinese)

[3] 刘得军, 刘彩平, 韦荣方.基于粒子群算法的6-DOF并联坐标测量机的测量建模［J］. 光学 精密工程,2008,16(1):76-81.

    LIU D J, LIU C P, WEI R F. Measurement modeling for 6-DOF parallel-link coordinate measuring machine based on particle swarm optimization［J］. Opt. Precision Eng.,2008,16(1):76-81. (in Chinese)

[4] TAKAAKI O. Accuracy improvement of parallel kinematic machine-error compensation system for joints, links and machine frame ［C］. 6th International Conference on Mechatronics Technology (ICMT2002),September 29-October 3, 2002:433-438.

[5] SATO O, HIRAKJ M, TAKAMASU K. The calibration of parallel-CMM: parallel-coordinate measuring machine ［C］. Proc. Of the 3rd euspen International Conference, Eindhoven, The Netherlands, May 26th-30th, 2002:573-576.

[6] WOLFGANG Z, NEUSTADT C. Device for the translatory positioning of a platform:United States, US 6976821 ［P］.2005-12-20.

[7] TLUSTY J, ZIEGERT J, RIDGEWAY S. Fundamental comparison of the use of serial and parallel kinematics for machine tools［C］. Annals of the CIRP, 1999:351-356.

[8] 胡鹏浩, 李松原.3-PSS并联机构正解及其在坐标测量机中的应用［J］.光学 精密工程, 2012,20(4):782-788.

    HU P H, LI S Y. Kinematics solution of 3-PSS parallel mechanism and its application in parallel CMM ［J］. Opt. Precision Eng.,2012,20(4):782-788.(in Chinese)

[9] 胡鹏浩, 杨佳辉, 何小辉.基于3-pss机构的坐标测量机:中国,201010541816.7［P］2011.

    HU P H, YANG J H, HE X H.3-pss parallel CMM：China, 201010541816.7［P］.2011.

[10] 马立,于瀛洁,程维明,等. BP神经网络补偿并联机器人定位误差［J］. 光学 精密工程,2008,16(5):878-883.

    MA L, YU Y J, CHENG W M, et al.. Positioning error compensation for a parallel robot based on BP neural networks ［J］. Opt. Precision Eng.,2008,16(5):878-883.(in Chinese)

[11] LI S Y, HU P H, Analysis and optimization of measuring space for the 3-PSS parallel CMM ［C］.　2012 International Conference on Optoelectronics and Microelectronics (ICOM2012), 2012：437-442.

[12] 张雷, 金光.同轴轻型空间遥感器支撑桁架的设计与试验［J］. 光学 精密工程,2010,18(5):1099-1104.

    ZHANG L, JIN G. Design and test of supporting truss for light space remote sensor ［J］. Opt. Precision Eng.,2010,18(5):1099-1104.(in Chinese)

[13] 李志来, 徐宏.长条形空间反射镜及其支撑结构设计［J］. 光学 精密工程,2011,19(5):1039-1047.

    LI ZH L, XU H. Design of rectangular space mirror and its support structure ［J］. Opt. Precision Eng.,2011,19(5):1039-1047.(in Chinese)