基于条纹投影的振动扬声器形变测量
陈露, 王效惠, 李雪, 张启灿. 基于条纹投影的振动扬声器形变测量[J]. 光学与光电技术, 2015, 13(1): 22.
CHEN Lu, WANG Xiao-hui, LI Xue, ZHANG Qi-can. Deformation Measurement of A Vibrating Speaker Based on Fringe Projection[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2015, 13(1): 22.
[1] Frakort. 扬声器锥体振动和声辐射[M]. 赵志诚, 译. 北京: 科学出版社, 1988.
Frakort. Vibration and sound radiation of loudspeaker cones[M]. Zhao Zhicheng, Beijing: Science Press, 1988.
[2] 王儒. 扬声器的失真机理及消除方法[J]. 内蒙古科技与经济, 1996, (6): 63-64.
Wang Ru. Speaker distortion mechanism and its elimination[J]. Inner Mongolia Science Technology and Economy, 1996, (6): 63-64.
[3] THIELE A N. Loudspeakers in vendet boxes part Ⅰ[J]. Journal of the Audio Engineering Society, 1971, 19(5): 382-392.
[4] 王以真, 沈伟星. 音箱研讨(二)——论扬声器品质因数QTS[J]. 电声技术, 2006, (12): 22-26.
Wang Yizhen, Shen Weixing. Study and Discussion on Loudspeaker(Ⅱ)-Analysis of Quality Factor Qts of Loudspeaker[J]. Electro-acoustic technology, 2006, 12: 22-26.
[5] 王以真, 沈伟星. 音箱研讨(三)——扬声器低频参数的测试和计算[J]. 电声技术, 2007, (1): 19-21.
Wang Yizhen,Shen Weixing.Study and Discussion on Loudspeaker(Ⅲ)- Measurent and Calculation of Low-frequency Parameters of Loudspeaker..Electro-acoustic technology, 2007, (1): 19- 21.
[6] Pater A Fryer. Laser Technology in loud speaker design includes the 'impulse progression plot[J]. Acoustics Letters, 1991, 14(7): 125-134.
[7] 徐士良, 范鹤年. 扬声器中频谷点的全息分析及改善方法[J]. 南京大学学报, 1984, 20(4): 665-674.
Xu Shiliang, Fan Quenian. Holographic Analyz the Squawker Through of the Loudspeaker and the Methods of Improvement[J]. Journalof Nanjing University, 1984, 20(4): 665-674.
[8] M Takeda, K Mutoh. Fourier transform profilometry for the automatic measurement of 3-D object shapes[J]. Applied Optics, 1983, 36(22): 3977-3982.
[9] Jin-Feng Lin, Xian-Yu Su. Two-dimensional Fourier transform profilometry for the automatic measurement of three-dimensional object shapes[J]. Optical Engineering, 1995, 34(11): 3297-3302.
[10] Xianyu Su, Qican Zhang. Dynamic 3-D shape measurement method: A review[J]. Optics and Lasers in Engineering, 2010, 48(2): 191-204.
[11] 张启灿. 动态过程三维面形测量技术研究[D]. 成都: 四川大学, 2005.
Qican Zhang. Technical Study of Three-dimensional Shape Measurement of Dynamic Process[D]. Chengdu: Doctoral dissertation of Sichuan University, 2005.
[12] 严家明, 于洪伟, 张毛毛, 等. 基于MATLAB光栅周期校正方法研究[J]. 光学与光电技术, 2013, 11(3): 27-30.
[13] 李岩, 麻珂, 张启灿. 傅里叶变换轮廓术中相位失真的预矫正方法[J]. 光学与光电技术, 2012, 10(1): 22-27.
[14] 郭志明, 张启灿, 麻珂. 三维面形测量中结构光场的非线性分析和矫正[J]. 激光杂志, 2011, 32(1): 14-16.
Guo Zhiming, Qican Zhang, Ma Ke. Analysis and Correction of the Nonlinearity of the Structured Light Illumination in Three-Dimensional Shape Measurement.Laser Journal, 2011, 32(1)::14-16.
[15] 郭继烈. 谈分割振动[J]. 电声技术, 2003, 2: 36-39.
Gong Jilie. Tan split vibration[J]. Audio Engineering, 2003, (2):36-39.
[16] 王效惠. 微飞行器扇动扑翼的三维面形测量研究[D]. 成都: 四川大学, 2013.
Wang Xiaohui. Study on Three Dimensional Shape Measurement of Flapping-wing Micro Air Vehicle[D]. Chengdu: Sichuan University, 2013.
陈露, 王效惠, 李雪, 张启灿. 基于条纹投影的振动扬声器形变测量[J]. 光学与光电技术, 2015, 13(1): 22. CHEN Lu, WANG Xiao-hui, LI Xue, ZHANG Qi-can. Deformation Measurement of A Vibrating Speaker Based on Fringe Projection[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2015, 13(1): 22.