[1] Roger Y Tsai. A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses [J]. IEEE J Robotics Automation, 1987, 3(4): 323-344.

[2] Zhang Zhengyou. A flexible new technique for camera calibration [J]. IEEE Trans Pattern Analysis and Machine Intelligence, 2000, 22(11): 1330-1334.

[3] 薛俊鹏, 苏显渝. 基于两个正交一维物体的单幅图像相机标定[J]. 光学学报, 2012, 32(1): 0115001.

    Xue Junpeng, Su Xianyu. Camera calibration with single image based on two orthogonal one-dimensional objects [J]. Acta Optica Sinica, 2012, 32(1): 0115001.

[4] 刘震, 尚砚娜. 立体视觉传感器的一种灵活靶标新标定方法[J]. 光学学报, 2013, 33(3): 0315001.

    Liu Zhen, Shang Yanna. Novel calibration method for stereo vision sensor using flexible target [J]. Acta Optica Sinica, 2013, 33(3): 0315001.

[5] 杨博文, 张丽艳, 叶南, 等. 面向大视场视觉测量的摄像机标定技术[J]. 光学学报, 2012, 32(9): 0915001.

    Yang Bowen, Zhang Liyan, Ye Nan, et al.. Camera calibration technique of wide-area vision measurement [J]. Acta Optica Sinica, 2012, 32(9): 0915001.

[6] 周富强, 蔡斐华. 基于非量测畸变校正的摄像机标定方法[J]. 机械工程学报, 2009, 45(8): 228-232.

    Zhou Fuqiang, Cai Feihua. Camera calibration method based on non-metric distortion correction [J]. Chinese J Mechanical Engineering, 2009, 45(8): 228-232.

[7] 陈天飞, 马孜, 李鹏, 等. 一种基于非量测畸变校正的摄像机标定方法[J]. 控制与决策, 2012, 21(2): 243-251.

    Chen Tianfei, Ma Zi, Li Peng, et al.. A camera calibration method based on non-metric distortion correction [J]. Control and Decision, 2012, 21(2): 243-251.

[8] 廖士中, 高培焕, 苏艺, 等. 一种光学镜头摄像机图象几何畸变的修正方法[J]. 中国图象图形学报, 2000, 5(7): 593-596.

    Liao Shizhong, Gao Peihuan, Su Yi, et al.. A geometric rectification method for lens camera [J]. J Image and Graphics, 2000, 5(7): 593-596.

[9] 王富治, 黄大贵. 基于图像差分的精密畸变校正研究[J]. 仪器仪表学报, 2010, 31(2): 377-382.

    Wang Fuzhi, Huang Dagui. Accurate distortion correction study based on differential images [J]. Chinese J Scientific Instrument, 2010, 31(2): 377-382.

[10] 苏成志, 王恩国, 郝江涛, 等. 平面几何测量中的图像畸变校正[J]. 光学 精密工程, 2011, 19(1): 161-167.

    Su Chengzhi, Wang Enguo, Hao Jiangtao, et al.. Distortion correction for images in planar metrology [J]. Optics and Precision Engineering, 2011, 19(1): 161-167.

[11] 李为民, 俞巧云, 刘超. 采用分离式差分标定靶的单摄像机标定方法[J]. 光学学报, 2006, 26(5): 697-701.

    Li Weimin, Yu Qiaoyun, Liu Chao. Calibration method with separation pattern of a single-camera based on difference coordinates [J]. Acta Optica Sinica, 2006, 26(5): 697-701.

[12] Wei Guoqing, Ma Songde. Implicit and explicit camera calibration: theory and experiments [J]. IEEE Trans Pattern Analysis and Machine Intelligence, 1994, 16(5): 469-480.

[13] 刘鹏, 刘伟军. 基于计算机视觉的自由曲面三维测量技术研究[J]. 计算机工程, 2005, 31(4): 58-61.

    Liu Peng, Liu Weijun. Research on 3D measurement of free form surface based on computer vision technique [J]. Computer Engineering, 2005, 31(4): 58-61.

[14] J Weng, P Cohenn, M Herniod. Calibration of stereo cameras using a non-linear distortion model [C]. Atlantic: Proc 10th Int Conf on Pattern Recognition, 1990. 246-253.