[1] 刘家赫, 朱海红, 胡志恒, 等. 激光选区熔化成形边缘堆高研究及控制[J]. 中国激光, 2017, 44(12): 1202007.

    Liu J H, Zhu H H, Hu Z H, et al. Control of elevated edges in selective laser melting[J]. Chinese Journal of Lasers, 2017, 44(12): 1202007.

[2] CraeghsT. A monitoring system for on-line control of selective laser melting[D]. Belgium: Catholic University of Leuven, 2012.

[3] Mertens R, Clijsters S, Kempen K, et al. Optimization of scan strategies in selective laser melting of aluminum parts with downfacing areas[J]. Journal of Manufacturing Science & Engineering, 2014, 136(6): 061012.

[4] ClijstersS, CraeghsT, KruthJ. A priori process parameter adjustment for SLM process optimization[M]. New York: Taylor & Francis Group, 2012: 553- 560.

[5] KempenK. Dimensional accuracy of internal channels in SLM produced parts[C]. ASPE Spring Topical meeting, 2014.

[6] Pakkanen J, Calignano F, Trevisan F, et al. Study of internal channel surface roughnesses manufactured by selective laser melting in aluminum and titanium alloys[J]. Metallurgical and Materials Transactions A, 2016, 47(8): 3837-3844.

[7] ThomasD. The development of design rules for selective laser melting[D]. Cardiff: University of Wales, 2009.

[8] 刘婷婷, 张长东, 廖文和, 等. 激光选区熔化成形悬垂结构熔池行为试验分析[J]. 中国激光, 2016, 43(12): 1202004.

    Liu T T, Zhang C D, Liao W H, et al. Experimental analysis of pool behavior in overhang structure fabricated by selective laser melting[J]. Chinese Journal of Lasers, 2016, 43(12): 1202004.

[9] 杨雄文, 杨永强, 刘洋, 等. 激光选区熔化成型典型几何特征尺寸精度研究[J]. 中国激光, 2015, 42(3): 0303004.

    Yang X W, Yang Y Q, Liu Y, et al. Study on dimensional accuracy of typical geometric features manufactured by selective laser melting[J]. Chinese Journal of Lasers, 2015, 42(3): 0303004.

[10] Wang D, Mai S Z, Xiao D M, et al. Surface quality of the curved overhanging structure manufactured from 316-L stainless steel by SLM[J]. The International Journal of Advanced Manufacturing Technology, 2016, 86(1/2/3/4): 781-792.

[11] 杨永强, 卢建斌, 王迪, 等. 316L不锈钢选区激光熔化成型非水平悬垂面研究[J]. 材料科学与工艺, 2011, 19(6): 94-99.

    Yang Y Q, Lu J B, Wang D, et al. A study of 316L stainless steel non-horizontal overhanging surface in selective laser melting[J]. Materials Science and Technology, 2011, 19(6): 94-99.

[12] 麦淑珍, 杨永强, 王迪. 激光选区熔化成型NiCr合金曲面表面形貌及粗糙度变化规律研究[J]. 中国激光, 2015, 42(12): 1203004.

    Mai S Z, Yang Y Q, Wang D. Study on surface morphology and roughness variation of NiCr alloy curved surface manufactured by selective laser melting[J]. Chinese Journal of Lasers, 2015, 42(12): 1203004.

[13] Rombouts M, Froyen L, Gusarov A V, et al. Photopyroelectric measurement of thermal conductivity of metallic powders[J]. Journal of Applied Physics, 2005, 97(2): 024905.

[14] 张凯, 刘婷婷, 张长东, 等. 基于熔池数据分析的激光选区熔化成形件翘曲变形行为研究[J]. 中国激光, 2015, 42(9): 0903007.

    Zhang K, Liu T T, Zhang C D, et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data[J]. Chinese Journal of Lasers, 2015, 42(9): 0903007.

[15] Cloots M, Zumofen L, Spierings A B, et al. Approaches to minimize overhang angles of SLM parts[J]. Rapid Prototyping Journal, 2017, 23(2): 362-369.