[1] HEINE A, HASZLER A, KEIDEL C,et al. Development in aluminum alloy for aerorspace application［J］. Materials Science and Engineering, 2000, A280(2000): 102-107.

[2] ZHOU W Sh. The welding of aluminium and aluminium alloy［M］. Beijing: Mechanical Industry Press, 2006: 3-4(in Chinese).

[3] ZHAO T W, JIANG Y Y. Fatigue of 7075-T651 aluminum alloy ［J］. International Journal of Fatigue, 2008, 30(5): 834-849.

[4] ZHAI Y F, HUANG J, LI M, et al. Research on high speed high power CO2 laser welding of 6061-T6 aluminum with filler wire［J］. Chinese Journal of Lasers, 2011, 38(5): 85-90(in Chinese).

[5] LAHTI K. One+one is more than two ［J］. Svetsaren(English Edition), 2003, 8(2): 22-24.

[6] SONG X H, JIN X Zh, CHEN SH Q,et al. Progress of laser-arc hybrid welding and its applications in automotive body manufacture［J］. Laser Technology, 2015, 39(2): 259-265(in Chinese).

[7] YAO Y Sh, WANG Y Y, LI X Y. Review on laser hybrid welding technology［J］. Hot Working Technology ,2014, 43(9):16-20(in Chinese).

[8] LI Y X. Study on technology of laser-arc hybrid welding for structural steel plates［D］.Changchun: Jilin University, 2013:9-23(in Chinese).

[9] ZHAO Y B, LEI Zh L, MIAO Y G, et al. Welding characteristics of laser-arc double-sided welding for aluminum alloy［J］. Chinese Journal of Lasers, 2011, 38(6): 117-123(in Chinese).

[10] YANG J, LI X Y, GONG Sh L, et al. Characteristics of aluminium-lithium ally joint formed by YAG-MIG hybrid welding［J］. Transactions of the China Welding Institution, 2010, 31(2):83-86(in Chinese).

[11] ZHOU Y F. Study on fiber laser-MIG Arc hybrid welding of 5A06 aluminum alloy［D］. Changsha:Hunan University, 2016:5-22(in Chinese).

[12] GU L. A study on laser-arc hybrid welding for aluminum alloy and numerical simulation for the temperature field［D］. Wuhan:Huazhong University of Science and Technology, 2006:28-43(in Chinese).

[13] YUE H J, ZHAO H Y, CAI Zh P, et al. Welding residual stress and distortion simulation of thin aluminum structures［J］. Journal of Mechanical Engineering, 2005,41(2): 223-227(in Chinese).

[14] ZHANG J, CAI Y. Influence of side-blow assist gas nozzle position on plasma dimensions characteristic［J］. Hot Working Technology, 2012, 41(3):104-107(in Chinese).

[15] ANCONA A, SIBILLANO T, TRICARICO L, et al. Comparison of two different nozzles for laser beam welding of AA5083 aluminium alloy［J］. Journal of Materials Processing Technology, 2005, 164(1), 971-977.

[16] ZHANG L J, ZHANG J X, DUAN A Q. Effect of side gas on laser induced plasma during laser deep penetration welding［J］. Transactions of the China Welding Institution, 2006, 27(10):37-40(in Chinese).

[17] ZHANG N, SHENG H C, YAO H Zh. Validation of numerical simulation on resistance and flow field of submarine and numerical optimization of submarine hull form［J］.Journal of Ship Mechanics, 2005, 9(1): 1-12 (in Chinese).

[18] CHEN Q G, XU Zh, ZHANG Y J. Numerical simulation of a semi-confined slot turbulent impinging jet［J］. Chinese Journal of Applied Mechanics, 2003, 20(2): 88-91(in Chinese).

[19] CHEN Q G, XU Zh, ZHANG Y J. Numerical simulation of turbulent impinging jet flow using a modified renormalization group model ［J］. Journal of Xi’an Jiaotong University, 2002, 36(9): 916-920(in Chinese).

[20] ZHANG Zh Sh, CUI G X. Fluid mechanics［M］. Beijing: Tsinghua University Press, 2015:20-85(in Chinese).

[21] WANG B, SONG Y L. The phenomenon of welding arc and weld material manufacturability［M］. Beijing: Mechanical Industry Publishing House, 2012:13-90(in Chinese).