[1] 萨尔克夫Б Ю.惯性约束核聚变现状与能源前景［M］.北京: 原子能出版社, 2008.(Шapкob Б Ю. Status and perspective of nuclear fusion energy with inertial confinement. Beijing: Atomic Energy Press, 2008)

[2] Wilkens H L, Nikroo A, Wall D R, et al. Developing depleted uranium and gold cocktail hohlraums for the National Ignition Facility［J］. Physics of Plasmas, 2007, 14: 056310.

[3] Dewald E L, Rosen M, Glenzer S H, et al. X-ray conversion efficiency of high-Z hohlraum wall materials for indirect drive ignition［J］. Physics of Plasmas, 2008, 15: 072706.

[4] Jones O, Schein J, Rosen M, et al. Proof of principle experiments that demonstrate utility of cocktail hohlraums for indirect drive ignition［J］. Physics of Plasmas, 2007, 14: 056311.

[5] 熊必涛,杨维才,罗文华,等.铀表面腐蚀初始阶段的理论模型［J］.原子能科学技术, 2005, 39(s0): 146-150.(Xiong Bitao, Yang Weicai, Luo Wenhua, et al. Theoretical modeling of uranium surface corrosion at initial stage. Atomic Energy Science and Technology, 2005, 39(s0): 146-150)

[6] Cook R C, Kozioziemski B J, Nikroo A, et al. National Ignition Facility target design and fabrication［C］//3rd Moscow Workshop Targets & Applications. 2007.

[7] Foreman L R, Gobby P, Bamos J, et al. Hohlraum manufacture for inertial confinement fusion［C］//35th Annual Meeting of the American Nuclear Society. 1994.

[8] Haan S W, Salmonson J D, Clark D S, et al. NIF ignition target requirements, margins, and uncertainties: Status February 2010［C］//19th Target Fabrication Meeting. 2010.

[9] 杜凯,郑风成,谢军.机械研磨法制备晶体密度钼膜技术研究［J］.强激光与粒子束, 2005, 17(6): 879-882.(Du Kai, Zheng Fengcheng, Xie Jun. Preparation of Mo films with theoretical density by lapping. High Power Laser and Particle Beams, 2005, 17(6): 879-882)

[10] Tsuji Y, Gasser S M, Kolawa E, et al. Texture of copper films Ta35 Si15N47 and Ti33Si23N44 underlayers［J］. Thin Solid Films, 1999, 350(1/2): 1-4.

[11] 陈瑞芳,高丽,花银群,等.磁控溅射工艺参数对Cu薄膜织构的影响［J］.江苏大学学报: 自然科学版, 2009, 30(5): 483-486.(Chen Ruifang, Gao Li, Hua Yinqun, et al. Effect of sputtering parameters on texture of Cu films. Journal of Jiangsu University: Natural Science Edition, 2009, 30(5): 483-486)

[12] Messier R, Giri A P, Roy R A. Revised structure zone model for thin films physical structure［J］. J Vac Sci Techn A, 1984, 2(2): 500-506.

[13] 苏修梁,张欣宇.表面涂层与基体间的界面结合强度及其测定［J］.电镀与环保, 2004, 24(2): 6-11.(Su Xiuliang, Zhang Xinyu. Interfacial bonding strength between surface coating and substrate and its measurement. Electroplating and Pollution Control, 2004, 24(2): 6-11)