[1] 王春霞, 顾振杰, 雷剑波, 等.高功率半导体激光熔覆Ni-B型石英纤维涂层组织及性能研究［J］.应用激光, 2017(2): 194-198.

    WANG CHUNXIA, GU ZHENJIE, LEI JIANBO, et al.Microstructure and properties of Ni-B quartz fiber composite coating by high power diode laser cladding［J］.Applied Laser, 2017(2): 194-198.

[2] 翁子清, 董刚, 张群莉, 等.退火对激光熔覆FeCrNiCoMn高熵合金涂层组织与性能的影响［J］.中国激光, 2014, 41(3): 59-64.

    WENG ZIQING, DONG GANG, ZHANG QUNLI, et al.Effects of annealing on microstructure and properties of FeCrNiCoMn high-entropy alloy coating prepared by laser cladding［J］.Chinese Journal of Lasers, 2014, 41(3): 59-64.

[3] 王宏立.65Mn钢表面激光熔覆铁基合金组织及摩擦磨损性能［J］.应用激光, 2016(4): 385-390.

    WANG HONGLI.Microstructure and tribological behavior of Iron-based alloy coating on surface of 65Mn steel by laser cladding［J］.Applied Laser, 2016(4): 385-390.

[4] 刘衍聪, 刘本良, 战祥华, 等.激光熔覆层结合强度测试方法研究及装置设计［J］.应用激光, 2016(6): 641-648.

    LIU YANCONG, LIU BENLIANG, ZHAN XIANGHUA, et al.Research of laser cladding layer bonding strength test method and device design［J］.Applied Laser, 2016(6): 641-648.

[5] 刘建弟, 张述泉, 王华明.激光熔覆WC颗粒增强复合涂层的组织及耐磨性［J］.中国有色金属学报, 2012(9): 2600-2607.

    LIU JIANDI, ZHANG SHUQUAN, WANG HUAMING.Microstructure and wear resistance of laser cladding WC particles reinforced composite coatings［J］.The Chinese Journal of Nonferrous Metals, 2012(9): 2600-2607.

[6] TORIMS T, PIKURS G, RATKUS A, et al.Development of technological equipment to laboratory test in-situ laser cladding for marine engine crankshaft renovation［J］.Procedia Engineering, 2015(100): 559-568.

[7] PAYDAS H, MERTENS A, CARRUS R, et al.Laser cladding as repair technology for Ti-6Al-4V alloy: Influence of building strategy on microstructure and hardness［J］.Materials & Design, 2015(85): 497-510.

[8] RIQUELME A, RODRIGO P, ESCALERA-RODRGUEZ M D, et al.Analysis and optimization of process parameters in Al-SiCp laser cladding［J］.Optics and Lasers in Engineering, 2016, 78(2): 165-173.

[9] SONG R, LI J, SHAO J Z, et al.Microstructural evolution and wear behaviors of laser cladding Ti2Ni/α(Ti)dual-phase coating reinforced by TiB and TiC［J］.Applied Surface Science, 2015(355): 298-309.

[10] 李东东, 潘斌, 李崇桂, 等.激光熔覆Al2O3-TiO2涂层的工艺与性能研究［J］.应用激光, 2016(1): 9-13.

    LI DONGDONG, PAN BIN, LI ZONGGUI, et al.process analysis and properties of laser cladding Al2O3-TiO2 coating［J］.Applied Laser, 2016(1): 9-13.

[11] 张凤英, 刘桐, 胡广, 等.激光熔覆沉积Ti-20V-15Cr合金的组织演化与硬度［J］.应用激光, 2017(1): 1-6.

    ZHANG FENGYING, LIU TONG, HU GUANG, et al.Microstructure evolution and hardness of laser cladding deposited Ti-20V-15Cr alloy［J］.Applied Laser, 2017(1): 1-6.

[12] 赵文强, 苗鸿宾, 梁艳.采煤机截齿的激光熔覆修复技术研究［J］.煤矿机械, 2012, 33(4): 175-177.

    ZHAO WENQIANG, MIAO HONGBIN, LIANG YAN.Research of laser cladding repair technology on shearer picks［J］.Coal Mine Machinery, 2012, 33(4): 175-177.

[13] 郭彬, 梁峰.基于激光熔覆技术的刮板再制造工艺研究［J］.煤矿机械, 2017, 38(8): 79-80.

    GUO BIN, LIANG FENG.Research on technology of remanufacturing based on laser cladding ［J］.Coal Mine Machinery, 2017, 38(8): 79-80.

[14] 马宗彬, 陈铭, 丁紫阳.激光熔覆耐蚀强化技术在液压支架上的应用研究［J］.山东煤炭科技, 2016(2): 102-103.

    MA ZONGBIN, CHEN MING, DING ZIYANG.The application research of laser cladding corrosion resistant strengthening technology on hydraulic support［J］.Shandong Coal Science and Technology, 2016(2): 102-103.

[15] 张艺, 马志凯, 孙铂, 等.激光熔覆材料的研究现状及发展［J］.热加工工艺, 2015, 44(14): 40-44.

    ZHANG YI, MA ZHIKAI, SUN BO, et al.Present status and development of material for laser cladding［J］.Hot Working Technology, 2015, 44(14): 40-44.

[16] WENG Z, WANG A, WANG Y, et al.Diode laser cladding of Fe-based alloy on ductile cast iron and related interfacial behavior［J］.Surface and Coatings Technology, 2016, 286(4): 64-71.