[1] 曾晓卿, 贺海燕, 周珊珊, 等. H13钢表面激光熔敷Ni60A 合金组织及性能分析[J]. 太原理工大学学报, 2007, 41(4): 361-363.

    Zeng Xiaoqing, He Haiyan, Zhou Shanshan, et al.. Microstructure and property analysis of laser cladded Ni60 alloy on H13 steel surface [J]. Journal of Taiyuan University of Technology, 2007, 41(4): 361-363.

[2] 唐淑君, 刘洪喜, 张晓伟, 等. H13钢表面激光选区熔覆Ni-Al金属间化合物涂层的组织与性能[J]. 红外与激光工程, 2014, 43(5): 1622-1624.

    Tang Shujun, Liu Hongxi, Zhang Xiaowei, et al.. Microstructure and property of selective laser cladding Ni-Al intermetallic compound coating on H13 steel surface[J]. Infrared and Laser Engineering, 2014, 43(5): 1622-1624.

[3] 闫忠琳, 叶宏. 激光熔覆技术及其在模具中的应用[J]. 激光杂志, 2006, 27(2): 73-74.

    Yan Zhonglin, Ye Hong. The technique of laser cladding and its application on dies[J]. Laser Journal, 2006, 27(2): 73-74.

[4] 姚爽, 刘洪喜, 张晓伟, 等. H13钢表面激光原位自生TiC颗粒增强复合涂层的微观结构和摩擦磨损性能[J]. 中国激光, 2014, 41(10): 1003004.

    Yao Shuang, Liu Hongxi, Zhang Xiaowei, et al.. Microstructure and wear property of TiC particle reinforced composite coating on H13 steel surface by laser in-situ synthesis[J]. Chinese J Lasers, 2014, 41(10): 1003004.

[5] Qiao Y F, Fischer T E, Dent A. The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC-Co coatings with very fine structures[J]. Surface and Coating Technology, 2003, 172(1): 24-41.

[6] Si S H, Yuan X M, Liu Y L, et al.. Effect of laser power on microstructure and wear resistance of WCp/Ni cermet coating[J]. Journal of Iron and Steel Research International, 2006, 13(3): 74-78.

[7] 杨理京, 李祉宏, 李波, 等. 超音速激光沉积法制备Ni60涂层的显微组织及沉积机理[J]. 中国激光, 2015, 42(3): 0306005.

    Yang Lijing, Li Zhihong, Li Bo, et al.. Microstructure and deposition mechanism of Ni60 coatings prepared by supersonic laser deposition [J]. Chinese J Lasers, 2015, 42(3): 0306005.

[8] 郭士锐, 陈智君, 张群莉, 等. 不同压力对气雾化激光熔覆专用合金粉末的影响[J]. 中国激光, 2013, 40(6): 0603001.

    Guo Shirui, Chen Zhijun, Zhang Qunli, et al.. Effects of different pressures on laser cladding special powder prepared by gas atomization [J]. Chinese J Lasers, 2013, 40(6): 0603001.

[9] 戎磊, 黄坚, 李铸国, 等. 激光熔覆WC颗粒增强Ni基合金涂层的组织与性能[J]. 中国表面工程, 2010, 23(6): 41-50.

    Rong Lei, Huang Jian, Li Zhuguo, et al.. Microstructure and property of laser cladding Ni-based alloy coating reinforced by WC particles [J]. Chinese Surface Engineering, 2010, 23(6): 41-50.

[10] Ma Q S, Li Y, Wang J, et al.. Investigation on cored-eutectic structure in Ni60/WC composite coatings fabricated by wide-band laser cladding[J]. Journal of Alloys and Compounds, 2015, 645: 151-157.

[11] Zhang Y M, Hida M, Sakakibara A, et al.. Effect of WC addition on microstructures of laser melted Ni-based alloy powder[J]. Journal of Materials Engineering and Performance, 2002, 11(6): 667-674.

[12] Wu P, Du H M, Chen X L, et al.. Influence of WC particle behavior on the wear resistance properties of Ni-WC composite coatings[J]. Wear, 2004, 257(1-2): 142-147.

[13] Li S, Hu QW, Zeng X Y, et al.. Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer[J]. Applied Surface Science, 2005, 240(1): 63-70.

[14] Xu G J, Kutsuna M, Liu Z J, et al.. Characteristics of Ni-based coating layer formed by laser and plasma cladding processes[J]. Materials Science and Engineering A, 2006, 417(1-2): 63-72.

[15] 吴新伟, 曾晓雁, 朱蓓蒂, 等. 镍基碳化钨金属陶瓷激光熔覆层开裂性的研究[J]. 中国激光, 1997, 24(6): 570-576.

    Wu Xinwei, Zeng Xiaoyan, Zhu Beidi, et al.. Cracking tendency of laser cladding Ni-based WC composite coatings[J]. Chinese J Lasers, 1997, 24(6): 570-576.

[16] Gustafson P. A thermodynamical evaluation of the C-Cr-Fe-W system[J]. Metallurgical Transactions A, 1998, 19(10): 2547-2554.

[17] 崔忠圻, 刘北兴. 金属学与热处理原理[M]. 哈尔滨: 哈尔滨工业大学出版社, 2007: 2.

    Cui Zhongqi, Liu Beixing. Metallurgy and heat treatment theory[M]. Harbin: Harbin Institute of Technology Press, 2007: 2.

[18] Farahmand P, Liu S, Zhang Z, et al.. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3 [J]. Ceramics International, 2014, 40(10): 15421-15438.

[19] 刘喜明. 镍基合金+WC激光熔覆层的显微组织形成机理及控制[J]. 应用激光, 2006, 26(5): 299-302.

    Liu Ximing. Mechanism and control of the nick based alloy +WC laser cladded layer microstructure[J]. Applied Laser, 2006, 26(5): 299- 302.

[20] 陈志坤, 刘敏, 曾德长, 等. 铜表面激光熔覆NiCrWB 合金的组织结构与耐磨性能研究[J]. 摩擦学学报, 2010, 30(4): 344-349.

    Chen Zhikun, Liu Min, Zeng Dechang, et al.. Microstructure and wear resistance of laser cladding NiCrWB alloy coating Cu substructure [J]. Tribology, 2010, 30(4): 344-349.

[21] Jin Y, Fan J, Mou K, et al.. Structural and phase transformation behavior of electroless Ni-W-Cr-P alloy coatings on stainless steel[J]. Inorganic Materials, 2010, 46(6): 631-638.

[22] 袁晓洲, 戴晓光. 激光熔覆Ni基WC涂层内铸造WC颗粒溶解特征的研究[J]. 宁波职业技术学院学报, 2013, 17(6): 106-108.

    Yuan Xiaozhou, Dai Xiaoguang. Investigation on dissolution characteristics of cast WC particles in Ni-based WC coating by laser cladding [J]. Journal of Ningbo Polytechnic, 2013, 17(6): 106-108.