轴棱锥顶点加工误差的修正
吴逢铁, 江新光. 轴棱锥顶点加工误差的修正[J]. 光学 精密工程, 2009, 17(10): 2506.
WU Feng-tie, JIANG Xin-guang. Modification of vertex manufacture error on an axicon[J]. Optics and Precision Engineering, 2009, 17(10): 2506.
[1] . The axicon: a new type of optical element[J]. J. Opt. Soc. Am. A, 1954, 44(8): 592-597.
[2] . Exact solutions for nondiffractingbeams[J]. J. Opt. Soc. Am. A, 1987, 4(4): 651-654.
[3] . Production and uses of diffractionless beams[J]. J. Opt. Soc. Am.A, 1991, 8(6): 932-942.
[4] 吴逢铁,郭东栋,陈云彬,等.基于轴棱锥用主被动方式产生短脉冲高功率近似无衍射光[J].光学 精密工程,2007,15(11):1692-1697.
[5] SCOTT G,MCARDLE N. Efficient generation of nearly diffraction-free beams using an axicon[J]Opt. Eng, 1992,31(12):2640-2643.
[6] ANGELIES M,CACCIAPUOTI L,PIERATTINI G,et al..Axislly symmetric hollow beams using refractive conical lenses[J].Opt. & Laser Eng. 2003,39(3):283-291.
[7] WU F T,CHEN Y B,GUO D D. Nanosecond pulsed Bessel-Gauss beam generated directly from a Nd:YAG axicon-based resonator. [J]. Appl.Opt.2007,46(22):4943-4946.
[8] 吴逢铁,江新光. 衍射轴棱锥产生光学点阵的理论和实验[J].光学学报,2008,28(12):2250-2254.
[9] 李萌,张朵,王中宇, 等.圆锥透镜对倾斜球面波光束的衍射模式[J].光学学报,2008,28(4):773-778.
[10] 江新光,吴逢铁,刘彬.轴棱锥椭圆加工精度产生畸变无衍射光的修正[J].中国激光,2007,34(11):1538-1542.
[11] . Characterization and modelling of the hollow beam produced by a real conical lens[J]. Opt.Commun, 2002, 211(10): 31-38.
[12] 吴逢铁,曾夏辉.相干贝塞尔光产生具有塔尔博特效应的局域空心光束[J].光学学报,2008,28(1):174-178.
[13] AHLUWALIA B P S,YUAN X C,TAO S H. Micromanipulation of high and low indices microparticles using a microfabricated double axicon [J].J. Appl. Phys. 2006,99(113104):1-6.
[14] . 干涉理论对bottle beam的描述[J]. 物理学报, 2007, 56(2): 791-797.
. The description of bottle beam based on the interferential theory[J]. Acta Phys.Sin., 2007, 56(2): 791-797.
[15] . . Design and fabrication of a double-axicon for generation of tailorable self-imaged three-dimensional intensity voids[J]. Opt. Lett., 2006, 31(7): 987-989.
吴逢铁, 江新光. 轴棱锥顶点加工误差的修正[J]. 光学 精密工程, 2009, 17(10): 2506. WU Feng-tie, JIANG Xin-guang. Modification of vertex manufacture error on an axicon[J]. Optics and Precision Engineering, 2009, 17(10): 2506.