[1] Boyer P R. An overview on the use of titanium in the aerospace industry[J]. Materials Science and Engineering A, 1996, 213(1/2): 103-114.

    Boyer P R. An overview on the use of titanium in the aerospace industry[J]. Materials Science and Engineering A, 1996, 213(1/2): 103-114.

[2] 王霄, 王东生, 高雪松, 等. 轻合金构件激光增材制造研究现状及其发展[J]. 应用激光, 2016, 36(4): 478-483.

    王霄, 王东生, 高雪松, 等. 轻合金构件激光增材制造研究现状及其发展[J]. 应用激光, 2016, 36(4): 478-483.

    Wang X, Wang D S, Gao X S, et al. Research status and development in laser additive manufacturing of light alloy components[J]. Applied Laser, 2016, 36(4): 478-483.

    Wang X, Wang D S, Gao X S, et al. Research status and development in laser additive manufacturing of light alloy components[J]. Applied Laser, 2016, 36(4): 478-483.

[3] LutjeringG, Williams JC. Titanium[M]. Berlin: Springer, 2007: 8.

    LutjeringG, Williams JC. Titanium[M]. Berlin: Springer, 2007: 8.

[4] 邓贤辉, 杨治军. 钛合金增材制造技术研究现状及展望[J]. 材料开发与应用, 2014, 29(5): 113-120.

    邓贤辉, 杨治军. 钛合金增材制造技术研究现状及展望[J]. 材料开发与应用, 2014, 29(5): 113-120.

    Deng X H, Yang Z J. Current situation andprospect of titanium alloy additive manufacturing technology[J]. Development and Application of Materials, 2014, 29(5): 113-120.

    Deng X H, Yang Z J. Current situation andprospect of titanium alloy additive manufacturing technology[J]. Development and Application of Materials, 2014, 29(5): 113-120.

[5] Gu D D, Meiners W, Wissenbach K, et al. Laser additive manufacturing of metallic components: Materials, processes and mechanisms[J]. International Materials Reviews, 2013, 57(3): 133-164.

    Gu D D, Meiners W, Wissenbach K, et al. Laser additive manufacturing of metallic components: Materials, processes and mechanisms[J]. International Materials Reviews, 2013, 57(3): 133-164.

[6] 王华明, 张述泉, 王向明. 大型钛合金结构件激光直接制造的进展与挑战(邀请论文)[J]. 中国激光, 2009, 36(12): 3204-3209.

    王华明, 张述泉, 王向明. 大型钛合金结构件激光直接制造的进展与挑战(邀请论文)[J]. 中国激光, 2009, 36(12): 3204-3209.

    Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components (invited paper)[J]. Chinese Journal of Lasers, 2009, 36(12): 3204-3209.

    Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components (invited paper)[J]. Chinese Journal of Lasers, 2009, 36(12): 3204-3209.

[7] Mereddy S, Bermingham M J. StJohn D H, et al. Grain refinement of wire arc additively manufactured titanium by the addition of silicon[J]. Journal of Alloys and Compounds, 2017, 695(2): 2097-2103.

    Mereddy S, Bermingham M J. StJohn D H, et al. Grain refinement of wire arc additively manufactured titanium by the addition of silicon[J]. Journal of Alloys and Compounds, 2017, 695(2): 2097-2103.

[8] 卞宏友, 雷洋, 李英, 等. 感应预热对激光沉积修复TA15钛合金显微组织和残余应力的影响[J]. 红外与激光工程, 2016, 45(7): 0705003.

    卞宏友, 雷洋, 李英, 等. 感应预热对激光沉积修复TA15钛合金显微组织和残余应力的影响[J]. 红外与激光工程, 2016, 45(7): 0705003.

    Bian H Y, Lei Y, Li Y, et al. Effects of induction preheating on microstructure and residual stress of laser deposition repair TA15 titanium alloy[J]. Infrared and Laser Engineering, 2016, 45(7): 0705003.

    Bian H Y, Lei Y, Li Y, et al. Effects of induction preheating on microstructure and residual stress of laser deposition repair TA15 titanium alloy[J]. Infrared and Laser Engineering, 2016, 45(7): 0705003.

[9] 梁少端, 张安峰, 王潭, 等. 感应加热消除激光直接成形DD4零件裂纹[J]. 中国激光, 2017, 44(2): 0202003.

    梁少端, 张安峰, 王潭, 等. 感应加热消除激光直接成形DD4零件裂纹[J]. 中国激光, 2017, 44(2): 0202003.

    Liang S D, Zhang A F, Wang T, et al. Elimination of laser direct forming crack on DD4 parts by induction heating[J]. Chinese Journal of Lasers, 2017, 44(2): 0202003.

    Liang S D, Zhang A F, Wang T, et al. Elimination of laser direct forming crack on DD4 parts by induction heating[J]. Chinese Journal of Lasers, 2017, 44(2): 0202003.

[10] Tamirisakandala S, Bhat R B, Tiley J S, et al. Grain refinement of cast titanium alloys via boron addition[J]. Scripta Materialia, 2005, 53(12): 1421-1426.

    Tamirisakandala S, Bhat R B, Tiley J S, et al. Grain refinement of cast titanium alloys via boron addition[J]. Scripta Materialia, 2005, 53(12): 1421-1426.

[11] Lin X, Li Y M, Wang M, et al. Columnar to equiaxed transition during alloy solidification[J]. Science in China Series E, 2003, 46(5): 475-489.

    Lin X, Li Y M, Wang M, et al. Columnar to equiaxed transition during alloy solidification[J]. Science in China Series E, 2003, 46(5): 475-489.

[12] Ahmed T, Rack H J. Phase transformations during cooling in α+β titanium alloys[J]. Materials Science and Engineering A, 1998, 243(1/2): 206-211.

    Ahmed T, Rack H J. Phase transformations during cooling in α+β titanium alloys[J]. Materials Science and Engineering A, 1998, 243(1/2): 206-211.

[13] 储茂友, 惠松骁, 张翥, 等. BT25y高温钛合金固溶处理及热暴露过程中硅化物的析出机制[J]. 电子显微学报, 2004, 23(2): 168-171.

    储茂友, 惠松骁, 张翥, 等. BT25y高温钛合金固溶处理及热暴露过程中硅化物的析出机制[J]. 电子显微学报, 2004, 23(2): 168-171.

    Chu M Y, Hui S X, Zhang Z, et al. Precipitation mechanism of silicide in BT25y titanium alloy in solution treatment and thermal exposure[J]. Journal of Chinese Electron Microscopy Society, 2004, 23(2): 168-171.

    Chu M Y, Hui S X, Zhang Z, et al. Precipitation mechanism of silicide in BT25y titanium alloy in solution treatment and thermal exposure[J]. Journal of Chinese Electron Microscopy Society, 2004, 23(2): 168-171.