[1] M I Mohammed, M P Y Desmulliez. Lab-on-a-chip based immunosensor principles and technologies for the detection of cardiac biomarkers: a review[J]. Lab Chip, 2011, 11(4): 569-595.

[2] H Becker, C Grtner. Polymer microfabrication technologies for microfluidic systems[J]. Anal Bioanal Chem, 2008, 390(1): 89-111.

[3] 祁恒, 王贤松, 陈涛, 等. PMMA基连续流式PCR微流控芯片的CO2激光直写加工与应用[J]. 中国激光, 2009, 36(5): 1239-1245.

    Qi Heng, Wang Xiansong, Chen Tao, et al.. Fabrication and application of PMMA continuous-flow PCR microfluidic chip with CO2 laser direct-writing ablation micromachining technique[J]. Chinese J Lasers, 2009, 36(5): 1239-1245.

[4] Y W Chen, H Wang, M Hupert, et al.. Modular microfluidic system fabricated in thermoplastics for the strain-specific detection of bacterial pathogens[J]. Lab Chip, 2012, 12(18): 3348-3355.

[5] H Becker, U Heim. Hot embossing as a method for the fabrication of polymer high aspect ratio structures[J]. Sens Actuators A Phys, 2000, 83(1-3): 130-135.

[6] J Giboz, T Copponnex, P Mélé. Microinjection molding of thermoplastic polymers: a review[J]. J Micromech Microeng, 2007, 17(6): 96-109.

[7] A Costela, I Garciamoreno, F Florido, et al.. Laser ablation of polymeric materials at 157 nm[J]. J Appl Phys, 1995, 77(6): 2343-2350.

[8] M I Mohammed, E Abraham, M P Y Desmulliez, et al.. Rapid laser prototyping of valves for microfluidic autonomous systems[J]. J Micromech Microeng, 2013, 23(3): 035034.

[9] J M Li, C Liu, L Y Zhu, et al.. The formation and elimination of polymer bulges in CO2 laser microfabrication[J]. J Mater Process Technol, 2009, 209(10): 4814-4821.

[10] H W Li, Y Q Fan, D Conchouso, et al.. CO2 laser-induced bump formation and growth on polystyrene for multi-depth soft lithography molds[J]. J Micromech Microeng, 2012, 22(11): 115037.

[11] 徐书洁, 段玉岗, 丁玉成, 等. PDMS微流控芯片复型模具的新型快速制作方法[J]. 机械工程学报, 2007, 43(6): 105-110.

    Xu Shujie, Duan Yugang, Ding Yucheng, et al.. New method for rapid fabricating masters of PDMS-based microfluidic devices[J]. Chinese J Mechanical Engineering, 2007, 43(6): 105-110.

[12] M T Koesdjojo, Y H Tennico, J T Rundel, et al.. Two-stage polymer embossing of co-planar microfluidic features for microfluidic devices[J]. Sens Actuators B, 2008, 131(2): 692-697.

[13] 雷剑波, 王镇, 王云山, 等. 激光透射焊接聚甲基丙烯酸甲酯试验研究[J]. 中国激光, 2013, 40(1): 0103006.

    Lei Jianbo, Wang Zhen, Wang Yunshan, et al.. Experiment study of laser transmission welding of polymethyl methacrylate[J]. Chinese J Lasers, 2013, 40(1): 0103006.

[14] 谢小柱, 李力钧, 魏昕, 等. 有机玻璃激光气化切割前沿[J]. 中国激光, 2008, 35(6): 925-930.

    Xie Xiaozhu, Li Lijun, Wei Xin, et al.. Evaporative front of laser cutting PMMA[J]. Chinese J Lasers, 2008, 35(6): 925-930.

[15] W S Tan, J Z Zhou, S Huang, et al.. Experimental study on laser plasticizing polyamide12[J]. Advanced Materials Research, 2012, 472-475: 2514-2518.

[16] 李俊昌. 激光的衍射及热作用计算[M]. 北京: 科学出社, 2008. 344-345.

    Li Junchang. The Calculation of Laser Diffraction and Thermal Acting[M]. Beijing: Science Press, 2008. 344-345.