[1] SILVERS H J, Jr, WACHTELL S. Perforation, welding and cutting plastic films with a continuous CO2 laser[R]. Pennsylvania: PA State University, 1970: 88-97.

[2] JAMES D, ARTHUR G. Laser transmission welding of thermoplastics-part Ⅰ: temperature and pressure modeling[J]. Journal of Manufacturing Science and Engineering, 2007, 129(10): 849-858.

[3] MAYBOUDI L S A, BIRK M, ZAK G, et al. Laser transmission welding of a lap-joint: thermal imagining observations and three-dimensional finite element modeling [J]. Journal of Heat Transfer, 2007,129(9): 1177-1186.

[4] ELHEM G, GIUSEPPE C, STEPHANE A. Laser diode transmission welding of polypropylene: geometrical and microstructure characterization of weld[J]. Materials and Design,2009,30(7): 2745-2751.

[5] BAPPA A, DIPTEN M, DIPANKAR B, et al. Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology[J]. Optics and Laser Technology, 2009, 41(8): 956-967.

[6] YUAN H, LAI J J, HE Y G. Experimental study on laser welding of thermoplastics[J]. Optics and Optoelectronic Technology,2005,3(1): 18-21(in Chinese).

[7] WANG Y L, CAI Y, WANG J C. Technology of laser welding plastic [J]. Applied Laser, 2006, 26(2): 93-96(in Chinese).

[8] WANG X, ZHANG H Z, DING G M. Investigation on influence of additive on welding quality of laser transmission welding plastics [J]. Applied Laser, 2007, 27(4): 314-317(in Chinese).

[9] LIU H X, ZHANG H Z, JI J Q, et al. Methods and present status of laser welding of plastics [J]. Laser Technology, 2008, 32(2): 166-170(in Chinese).

[10] WANG J C, QIN L M, LI J. Technics and microcosmic analysis research of PMMA/ABS thermoplastic laser transmission welding[J]. Applied Laser,2008,28(4): 287-291(in Chinese).

[11] WANG X, YANG K, ZHANG H Z. Experiment research on laser transmission welding of two different thermoplastics[J]. Transactions of the China Welding Institution, 2009, 30(5): 97-100(in Chinese).

[12] SHI WQ, YANG Y Q, HUANG Y L, et al. Simulation of the temperature field in rapid prototyping of selective laser melting[J]. Laser Technology, 2008, 32(4): 410-412(in Chinese).