光纤激光选区熔化316L不锈钢工艺优化 下载: 534次
王迪, 杨永强, 吴伟辉. 光纤激光选区熔化316L不锈钢工艺优化[J]. 中国激光, 2009, 36(12): 3233.
Wang Di, Yang Yongqiang, Wu Weihui. Process Optimization for 316L Stainless Steel by Fiber Laser Selective Melting[J]. Chinese Journal of Lasers, 2009, 36(12): 3233.
[1] F. Abe,K. Osakada,M. Shiomi et al.. The manufacturing of hard tools from metallic powders by selective laser melting[J]. J. Mater. Process. Tech.,2001,111(1-3):210-213
[2] 吴伟辉,杨永强. 选区激光熔化快速成形系统的关键技术[J]. 机械工程学报,2007,43(8):175-180
Wu Weihui,Yang Yongqiang. Key technioues of selective laser melting rapid prototyping system[J]. Chinese J. Mechanical Engineering,2007,43(8):175-180
[3] O. Rehme,C. Emmelmann. Reproducibility for properties of selective laser melting[C]. Proceedings of the Third International WLT-Conference on Lasers in Manufacturing,Munich,Germany,2005:16
[4] J. P. Krutha,L. Froyenb,J. Van Vaerenbergha et al.. Selective laser melting of iron-based powder[J]. J. Mater. Process. Tech.,2004,149(1-3):616-622
[5] . Abe,E. C. Santos,Y. Kitamura et al.. Influence of forming conditions on the titanium model in rapid prototyping with the selective laser melting process[J]. Mech. Engin. Sci., 2003, 217(1): 119-126.
[6] 廖健宏,蒙红云,王红卫 等.光纤激光精密切割系统的研制及其应用[J]. 中国激光,2007,34(1):135-138
[7] http://www.eos-gmbh.de
[8] http://www.mcp-group.com
[9] http://www.tomex-d-sign.de/_domain/conceptlaser/content
[10] . Yadroitsev,P. Bertrand,I. Smurov. Parametric analysis of the selective laser melting process[J]. Appl. Surf. Sci., 2007, 253(19): 8064-8069.
[11] 席明哲,张永忠,章萍芝 等.工艺参数对激光快速成型316L不锈钢组织性能的影响[J]. 中国激光,2002,A29(11):1045-1048
Xi Mingzhe,Zhang Yongzhong,Zhang Pingzhi et al.. Influence of processing parameter on the microstructure and properties of the 316L ss fabricated by laser direct deposition[J]. Chinese J. Lasers,2002,A29(11):1045-1048
[12] 宋建丽,邓琦林,胡德金 等.激光熔覆成型316 L不锈钢组织的特征与性能[J]. 中国激光,2005,32(10):1441-1444
[13] 吴伟辉,杨永强,来克娴. 选区激光熔化快速成型过程分析[J]. 华南理工大学学报(自然科学版),2007,35(3):23-27
Wu Weihui,Yang Yongqiang,Lai Kexian. Process analysis of papid prototyping with selective laser melting[J]. J. South China University of Technology,2007,35(3):23-27
[15] J. P. Kruth,B. Vandenbroucke,J. Vandenbroucke et al.. Benchmarking of different SLS/SLM processes as rapid manufacturing techniques[C]. Int. Conf. Polymers&Moulds Innovations (PMI),Gent,Beigium,2005
[16] . Nikolay,E. Sergei,A. Igor et al.. Balling processes during selective laser treatment of powders[J]. Rapid Prototyping J., 2004, 10(2): 78-87.
[17] . Balling phenomena during direct laser sintering of multi-component Cu-based metal powder[J]. J. Alloys and Componds, 2006, 8(5): 34-38.
王迪, 杨永强, 吴伟辉. 光纤激光选区熔化316L不锈钢工艺优化[J]. 中国激光, 2009, 36(12): 3233. Wang Di, Yang Yongqiang, Wu Weihui. Process Optimization for 316L Stainless Steel by Fiber Laser Selective Melting[J]. Chinese Journal of Lasers, 2009, 36(12): 3233.