激光增材制造Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V钛合金组织与疲劳性能研究 下载: 1126次
钦兰云, 吴佳宝, 王伟, 王超, 李长富, 杨光. 激光增材制造Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V钛合金组织与疲劳性能研究[J]. 中国激光, 2020, 47(10): 1002008.
Qin Lanyun, Wu Jiabao, Wang Wei, Wang Chao, Li Changfu, Yang Guang. Microstructures and Fatigue Properties of Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V Titanium Alloy Fabricated Using Laser Deposition Manufacturing[J]. Chinese Journal of Lasers, 2020, 47(10): 1002008.
[1] 贺瑞军, 王华明. 激光熔化沉积Ti-6Al-2Zr-Mo-V合金高周疲劳变形行为[J]. 稀有金属材料与工程, 2010, 39(2): 288-291.
[2] 杨光, 马玥, 王超, 等. 增材修复对激光沉积制造TC4组织与力学性能的影响[J]. 中国激光, 2018, 45(12): 1202002.
[3] 章敏. 送粉式和送丝式的钛合金激光增材制造特性研究[D]. 哈尔滨: 哈尔滨工业大学, 2013: 15- 18.
ZhangM. Research on laser additive manufacturing characteristics of titanium alloy with powder and wire[D]. Harbin: Harbin Institute of Technology, 2013: 15- 18.
[4] 冯晓甜, 顾宏, 周圣丰, 等. 送粉式激光增材制造TC4钛合金熔覆层组织及电化学腐蚀行为的研究[J]. 中国激光, 2019, 46(3): 0302003.
[5] 何阳, 屈孝和, 王越, 等. 钛合金的发展及应用综述[J]. 装备制造技术, 2014( 10): 160- 161.
HeY, Qu XH, WangY, et al. The development and application of overview of titanium alloy[J]. Equipment Manufacturing Technology, 2014( 10): 160- 161.
[6] 陈曦, 姚刚, 黄锐, 等. TC4钛合金加入铝夹层的激光焊接[J]. 中国激光, 2013, 40(6): 0603006.
[7] 贺瑞军, 王华明. 激光熔化沉积Ti-6Al-2Zr-Mo-V钛合金组织特征研究[J]. 航空材料学报, 2009, 29(6): 18-22.
He R J, Wang H M. Microstructure features of laser deposited Ti-6Al-2Zr-Mo-V alloy[J]. Journal of Aeronautical Materials, 2009, 29(6): 18-22.
[8] Sterling A J, Torries B, Shamsaei N, et al. Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V[J]. Materials Science and Engineering A, 2016, 655: 100-112.
[9] Edwards P, Ramulu M. Fatigue performance evaluation of selective laser melted Ti-6Al-4V[J]. Materials Science and Engineering A, 2014, 598: 327-337.
[10] Razavi S M J, Ferro P, Berto F, et al. Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V[J]. Theoretical and Applied Fracture Mechanics, 2018, 97: 376-384.
[11] 李承受. 空间环境条件下材料的失效[J]. 材料科学与工程, 1991, 9(1): 1-7.
[12] 刘婉颖, 朱毅科, 林元华, 等. 热处理对TC4钛合金显微组织和力学性能的影响[J]. 材料导报, 2013, 27(18): 108-111.
[13] 王文博, 马瑞鑫, 井志成, 等. 固溶时效处理对激光3D打印TC4合金组织与性能的影响[J]. 中国激光, 2019, 46(10): 1002003.
[14] 王悔改, 冷文才, 李双晓, 等. 热处理工艺对TC4钛合金组织和性能的影响[J]. 热加工工艺, 2011, 40(10): 181-183.
Wang H G, Leng W C, Li S X, et al. Effects of heat treatment process on microstructure and mechanical properties of TC4 alloy[J]. Hot Working Technology, 2011, 40(10): 181-183.
[15] 冯亮, 赵永庆, 曲恒磊, 等. Ti-6-22-22S合金大棒的显微组织与力学性能[J]. 材料工程, 2003, 31(8): 10-12.
Feng L, Zhao Y Q, Qu H L, et al. Microstructure and property of Ti-6-22-22S alloy dimension bar[J]. Journal of Materials Engineering, 2003, 31(8): 10-12.
[16] 魏幸, 毛小南, 侯智敏. Ti-62222s合金热处理工艺的研究[J]. 热加工工艺, 2014, 43(4): 205-208.
Wei X, Mao X N, Hou Z M. Study on heat treatment process of Ti-62222s alloy[J]. Hot Working Technology, 2014, 43(4): 205-208.
[17] 王华明, 张述泉, 汤海波, 等. 大型钛合金结构激光快速成形技术研究进展[J]. 航空精密制造技术, 2008, 44(6): 28-30.
Wang H M, Zhang S Q, Tang H B, et al. Research progress on laser rapid prototyping of large titanium alloy structures[J]. Aviation Precision Manufacturing Technology, 2008, 44(6): 28-30.
[18] Liu F C, Lin X, Huang C P, et al. The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718[J]. Journal of Alloys and Compounds, 2011, 509(13): 4505-4509.
[19] Zhu Y Y, Tian X J, Li J, et al. Microstructure evolution and layer bands of laser melting deposition Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Journal of Alloys and Compounds, 2014, 616: 468-474.
[20] Ren H S, Tian X J, Liu D, et al. Microstructural evolution and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 2015, 25(6): 1856-1864.
[21] Huang X, Cuddy J, Goel N, et al. Effect of heat treatment on the microstructure of a metastable β-titanium alloy[J]. Journal of Materials Engineering and Performance, 1994, 3(4): 560-566.
[22] 任永明, 林鑫, 黄卫东. 增材制造Ti-6Al-4V合金组织及疲劳性能研究进展[J]. 稀有金属材料与工程, 2017, 46(10): 3160-3168.
Ren Y M, Lin X, Huang W D. Research progress of microstructure and fatigue behavior in additive manufacturing Ti-6Al-4V alloy[J]. Rare Metal Materials and Engineering, 2017, 46(10): 3160-3168.
[23] 姚燕生, 汪俊, 陈庆波, 等. 激光增材制造产品缺陷及其处理技术研究现状[J]. 激光与光电子学进展, 2019, 56(10): 100004.
[24] 陶春虎. 航空用钛合金的失效及其预防[M]. 北京: 国防工业出版社, 2013.
Tao CH. Failure and prevention of aeronautical titanium alloy[M]. Beijing: National Defense Industry Press, 2013.
[25] 王清远. 超声加速疲劳实验研究[J]. 四川大学学报(工程科学版), 2002, 34(3): 6-11.
Wang Q Y. Accelerated fatigue testing by ultrasonic loading[J]. Journal of Sichuan University (Engineering Science Edition), 2002, 34(3): 6-11.
钦兰云, 吴佳宝, 王伟, 王超, 李长富, 杨光. 激光增材制造Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V钛合金组织与疲劳性能研究[J]. 中国激光, 2020, 47(10): 1002008. Qin Lanyun, Wu Jiabao, Wang Wei, Wang Chao, Li Changfu, Yang Guang. Microstructures and Fatigue Properties of Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V Titanium Alloy Fabricated Using Laser Deposition Manufacturing[J]. Chinese Journal of Lasers, 2020, 47(10): 1002008.