[1] HOWELL L L. Compliant Mechanisms ［M］. New York: John Wiley & Sons, 2001.

[2] VEROTTI M, CRESCENZI R, BALUCANI M, et al.. MEMS-based conjugate surfaces flexure hinge ［J］. Journal of Mechanical Design, 2015, 137(1): 012301.

[3] 马立, 谢炜, 刘波, 等. 柔性铰链微定位平台的设计［J］. 光学 精密工程, 2014, 22(2): 338-345.

    MA L, XIE W, LIU B, et al.. Design of micro-positioning stage with flexure hinge ［J］. Opt. Precision Eng. , 2014, 22(2). (in Chinese)

[4] WANG F J, LIANG C M, TIAN Y L, et al.. Design of a piezoelectric-actuated microgripper with a three-stage flexure-based amplification ［J］. IEEE/ASME Transactions on Mechatronics, 2015, 20(5): 2205-2213.

[5] LOBONTIU N. Compliant Mechanisms: Design of Flexure Hinges ［M］. Boca Raton,FL: CRC Press, 2002.

[6] PAROS J M. How to design flexure hinges ［J］. Machine Design, 1965, 37: 151-156.

[7] WU Y F, ZHOU Z Y. Design calculations for flexure hinges ［J］. Review of Scientific Instruments, 2002, 73(8): 3101-3106.

[8] 吴鹰飞, 周兆英. 柔性铰链的设计计算［J］. 工程力学, 2002, 19(6): 136-140.

    WU Y F, ZHOU Z Y. Design of flexure hinges ［J］. Engineering Mechanics, 2002, 19(6): 136-140. (in Chinese)

[9] SMITH S T, BADAMI V G, DALE J S, et al.. Elliptical flexure hinges ［J］. Review of Scientific Instruments, 1997, 68(3): 1474-1483.

[10] 卢倩, 黄卫清, 王寅, 等. 深切口椭圆柔性铰链优化设计［J］. 光学 精密工程, 2015, 23(1): 206-215.

    LU Q, HUANG W Q, WANG Y, et al.. Optimization design of deep-notch elliptical flexure hinges ［J］. Opt. Precision Eng., 2015, 23(1): 206-215. (in Chinese)

[11] LOBONTIU N, PAINE J S N, GARCIA E, et al.. Corner-filleted flexure hinges ［J］. Journal of Mechanical Design, 2001, 123(3): 346-352.

[12] TIAN Y, SHIRINZADEH B, ZHANG D. Closed-form compliance equations of filleted V-shaped flexure hinges for compliant mechanism design ［J］. Precision Engineering, 2010, 34(3): 408-418.

[13] LIU M, ZHANG X M, FATIKOW S. Design and analysis of a high-accuracy flexure hinge ［J］. Review of Scientific Instruments, 2016, 87(5): 055106.

[14] MA H W, YAO S M, WANG L Q, et al.. Analysis of the displacement amplification ratio of bridge-type flexure hinge ［J］. Sensors and Actuators A: Physical, 2006, 132(2): 730-736.

[15] CHOI S B, HAN S S, HAN Y M, et al.. A magnification device for precision mechanism featuring piezoactuators and flexure hinges: Design and experimental validation ［J］. Mechanism and Machine Theory, 2007, 42(9): 1184-1198.

[16] 卢倩, 黄卫清, 孙梦馨. 基于柔度比优化设计杠杆式柔性铰链放大机构［J］. 光学 精密工程, 2016, 24(1): 102-111.

    LU Q, WANG W Q, SUN M X. Optimization design of amplification mechanism for level flexure hinge based on compliance ratio ［J］. Opt. Precision Eng. , 2016, 24(1): 102-111. (in Chinese)

[17] 黄卫清, 史小庆, 王寅. 菱形压电微位移放大机构的设计［J］. 光学 精密工程, 2015, 23(3): 803-809.

    WANG W Q, SHI X Q, WANG Y. Design of diamond piezoelectric micro displacement amplification mechanism ［J］. Opt. Precision Eng. , 2015, 23(3): 803-809. (in Chinese)

[18] 刘小院. 基于柔性铰链通用模型的柔性位移放大机构建模方法研究［D］. 西安: 西安电子科技大学, 2014.

    LIU X Y. Modeling of compliant displacement amplifier based on a generalized model for conic flexure hinges ［D］. Xi′an: Xidian University, 2014. (in Chinese)

[19] 李威, 叶果, 王禹桥, 等. 一种桥式微位移放大机构的性能研究［J］. 中国矿业大学学报, 2011, 40(2): 310-314.

    LI W, YE G, WANG Y Q, et al.. Study of properties of a kind of bridge-type micro-displacement mechanism ［J］. Journal of China University of Mining & Technology, 2011, 40(2): 310-314. (in Chinese)

[20] CHEN G M, LIU X Y, GAO H W, et al.. A generalized model for conic flexure hinges［J］. Review of Scientific Instruments, 2009, 80(5): 055106.