基于声表面波的V型裂纹快速检测数值研究 下载: 707次
宋大成, 张兴媛, 陈超. 基于声表面波的V型裂纹快速检测数值研究[J]. 激光与光电子学进展, 2021, 58(5): 0514004.
Dacheng Song, Xingyuan Zhang, Chao Chen. Numerical Study on Rapid Detection of V-Shaped Cracks Based on Surface Acoustic Wave[J]. Laser & Optoelectronics Progress, 2021, 58(5): 0514004.
[1] 马保全, 周正干. 航空航天复合材料结构非接触无损检测技术的进展及发展趋势[J]. 航空学报, 2014, 35(7): 1787-1803.
Ma B Q, Zhou Z G. Progress and development trends of composite structure evaluation using noncontact nondestructive testing techniques in aviation and aerospace industries[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(7): 1787-1803.
[2] 周正干, 孙广开, 马保全, 等. 先进复合材料超声无损检测新技术的应用[J]. 科技导报, 2014, 32(9): 15-20.
Zhou Z G, Sun G K, Ma B Q, et al. Application of new developed techniques for ultrasonic nondestructive testing for advanced composite materials[J]. Science & Technology Review, 2014, 32(9): 15-20.
[3] 关建飞, 沈中华, 倪晓武, 等. 激光声表面波检测铝板表面凹痕的数值研究[J]. 测试技术学报, 2006, 20(5): 390-396.
Guan J F, Shen Z H, Ni X W, et al. Numerical analysis of the surface notch inspection by laser generated Rayleigh waves on aluminum plate[J]. Journal of Test and Measurement Technology, 2006, 20(5): 390-396.
[4] 关建飞, 沈中华, 倪晓武, 等. 激光超声探测铝板表面微缺陷深度的数值研究[J]. 测试技术学报, 2010, 24(1): 15-21.
Guan J F, Shen Z H, Ni X W, et al. Numerical study on depth evaluation of micro-surface crack by laser generated ultrasonic waves[J]. Journal of Test and Measurement Technology, 2010, 24(1): 15-21.
[5] 关建飞, 沈中华, 许伯强, 等. 表面垂直裂痕诱发瑞利波散射的数值分析[J]. 应用声学, 2006, 25(3): 138-144.
Guan J F, Shen Z H, Xu B Q, et al. Numerical simulation of scattering of Rayleigh wave by a surface-breaking crack[J]. Applied Acoustics, 2006, 25(3): 138-144.
[6] 孙宏祥, 许伯强, 张淑仪. 声表面波渡越时间法检测黏弹性介质表面凹痕深度的研究[J]. 声学学报, 2011, 36(2): 139-144.
Sun H X, Xu B Q, Zhang S Y. Study on depth detection of surface notches using time-of-flight method with surface acoustic waves in viscoelastic media[J]. Acta Acustica, 2011, 36(2): 139-144.
[7] 张进朋, 秦训鹏, 袁久鑫, 等. 基于激光超声衍射体波的缺陷定位定量检测[J]. 光学学报, 2020, 40(12): 1214002.
[8] 杨连杰, 李阳, 孙俊杰, 等. 激光超声表面波在表面缺陷上的反射与透射[J]. 激光与光电子学进展, 2019, 56(4): 041203.
[9] 尤博文, 倪辰荫, 沈中华. 光热调制裂纹闭合的激光超声实时监测[J]. 中国激光, 2019, 46(2): 0204009.
[10] 张政, 赵金峰, 潘永东. 声表面波在圆弧处反射及透射的数值研究[J]. 应用声学, 2019, 38(5): 815-823.
Zhang Z, Zhao J F, Pan Y D. Numerical study on reflection and transmission of surface acoustic waves at circular arc[J]. Journal of Applied Acoustics, 2019, 38(5): 815-823.
[11] 隋皓, 高晓蓉, 罗林, 等. 激光点源与线源激发表面波与钢轨缺陷作用的有限元仿真和实验[J]. 激光与光电子学进展, 2019, 56(8): 081201.
[12] Dutton B, Clough A R, Rosli M H, et al. Non-contact ultrasonic detection of angled surface defects[J]. NDT & E International, 2011, 44(4): 353-360.
[13] Achenbach J D. Laser excitation of surface wave motion[J]. Journal of the Mechanics and Physics of Solids, 2003, 51(11/12): 1885-1902.
[14] 许伯强, 沈中华, 倪晓武, 等. 涂层-基底系统激光激发表面波的时间-频率分析[J]. 激光技术, 2004, 28(6): 609-612.
[15] 罗玉昆. 激光超声有限元分析与信号检测方法研究[D]. 长沙: 国防科学技术大学, 2012.
Luo Y K. Study on finite element analysis and signal testing methods of laser-generated ultrasonic[D]. Changsha: National University of Defense Technology, 2012.
[16] Ye Z M. A new finite element formulation for planar elastic deformation[J]. International Journal for Numerical Methods in Engineering, 1997, 40(14): 2579-2591.
[17] 冯湾湾, 金磊, 赵金峰, 等. 激光激发横波作用垂直裂纹侧面后的模式转换[J]. 激光技术, 2018, 42(4): 487-493.
[18] 中国机械工程学会无损检测分会. 超声波检测[M]. 北京: 机械工业出版社, 2000: 16-18.
NDT Branch of Chinese Mechanical Engineering Society. Ultrasonic testing[M]. Beijing: Machinery Industry Press, 2000: 16-18.
[19] Cooper J A, Crosbie R A, Dewhurst R J, et al. Surface acoustic wave interactions with cracks and slots: a noncontacting study using lasers[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1986,33(5): 462-470.
宋大成, 张兴媛, 陈超. 基于声表面波的V型裂纹快速检测数值研究[J]. 激光与光电子学进展, 2021, 58(5): 0514004. Dacheng Song, Xingyuan Zhang, Chao Chen. Numerical Study on Rapid Detection of V-Shaped Cracks Based on Surface Acoustic Wave[J]. Laser & Optoelectronics Progress, 2021, 58(5): 0514004.