[1] Boyer R R. An overview on the use of titanium in the aerospace industry[J]. Materials Science & Engineering A, 1996, 213(1/2): 103-114.

    Boyer R R. An overview on the use of titanium in the aerospace industry[J]. Materials Science & Engineering A, 1996, 213(1/2): 103-114.

[2] 魏寿庸, 何瑜, 王青江, 等. 俄航空发动机用高温钛合金发展综述[J]. 航空发动机, 2005, 31(1): 52-58.

    魏寿庸, 何瑜, 王青江, 等. 俄航空发动机用高温钛合金发展综述[J]. 航空发动机, 2005, 31(1): 52-58.

    Wei S Y, He Y, Wang Q J, et al. Development of the aero-engine heat-resisting titanium alloys in Russia[J]. Aeroengine, 2005, 31(1): 52-58.

    Wei S Y, He Y, Wang Q J, et al. Development of the aero-engine heat-resisting titanium alloys in Russia[J]. Aeroengine, 2005, 31(1): 52-58.

[3] 许国栋, 王凤娥. 高温钛合金的发展和应用[J]. 稀有金属, 2008, 32(6): 774-780.

    许国栋, 王凤娥. 高温钛合金的发展和应用[J]. 稀有金属, 2008, 32(6): 774-780.

    Xu G D, Wang F E. Development and application of high-temperature Ti-based alloys[J]. Chinese Journal of Rare Metals, 2008, 32(6): 774-780.

    Xu G D, Wang F E. Development and application of high-temperature Ti-based alloys[J]. Chinese Journal of Rare Metals, 2008, 32(6): 774-780.

[4] Williams J. Thermo-mechanical processing of high-performance Ti alloys: Recent progress and future needs[J]. Journal of Materials Processing Technology, 2001, 117(3): 370-373.

    Williams J. Thermo-mechanical processing of high-performance Ti alloys: Recent progress and future needs[J]. Journal of Materials Processing Technology, 2001, 117(3): 370-373.

[5] Poorganji B, Yamaguchi M, Itsumi Y, et al. Microstructure evolution during deformation of a near-α titanium alloy with different initial structures in the two-phase region[J]. Scripta Materialia, 2009, 61(4): 419-422.

    Poorganji B, Yamaguchi M, Itsumi Y, et al. Microstructure evolution during deformation of a near-α titanium alloy with different initial structures in the two-phase region[J]. Scripta Materialia, 2009, 61(4): 419-422.

[6] Banerjee D, Williams J C. Perspectives on titanium science and technology[J]. Acta Materialia, 2013, 61(3): 844-879.

    Banerjee D, Williams J C. Perspectives on titanium science and technology[J]. Acta Materialia, 2013, 61(3): 844-879.

[7] 刘正武, 程序, 李佳, 等. 激光增材制造05Cr15Ni5Cu4Nb沉淀硬化不锈钢的热处理工艺[J]. 中国激光, 2017, 44(6): 0602010.

    刘正武, 程序, 李佳, 等. 激光增材制造05Cr15Ni5Cu4Nb沉淀硬化不锈钢的热处理工艺[J]. 中国激光, 2017, 44(6): 0602010.

    Liu Z W, Cheng X, Li J, et al. Heat-processing technology for laser addictive manufacturing of 05Cr15Ni5Cu4Nb precipitation-harding stainless steels[J]. Chinese Journal of Lasers, 2017, 44(6): 0602010.

    Liu Z W, Cheng X, Li J, et al. Heat-processing technology for laser addictive manufacturing of 05Cr15Ni5Cu4Nb precipitation-harding stainless steels[J]. Chinese Journal of Lasers, 2017, 44(6): 0602010.

[8] Mitoraj M, Godlewska E, Heintz O, et al. Scale composition and oxidation mechanism of the Ti-46Al-8Nb alloy in air at 700 and 800 ℃[J]. Intermetallics, 2011, 19(1): 39-47.

    Mitoraj M, Godlewska E, Heintz O, et al. Scale composition and oxidation mechanism of the Ti-46Al-8Nb alloy in air at 700 and 800 ℃[J]. Intermetallics, 2011, 19(1): 39-47.

[9] Copland E H, Young D J, Gleeson B. Formation of Z-Ti50Al30O20 in the sub-oxide zones of γ-TiAl-based alloys during oxidation at 1000 ℃[J]. Acta Materialia, 1999, 47(10): 2937-2949.

    Copland E H, Young D J, Gleeson B. Formation of Z-Ti50Al30O20 in the sub-oxide zones of γ-TiAl-based alloys during oxidation at 1000 ℃[J]. Acta Materialia, 1999, 47(10): 2937-2949.

[10] Gurrappa I. An oxidation model for predicting the life of titanium alloy components in gas turbine engines[J]. Journal of Alloys and Compounds, 2005, 389(1/2): 190-197.

    Gurrappa I. An oxidation model for predicting the life of titanium alloy components in gas turbine engines[J]. Journal of Alloys and Compounds, 2005, 389(1/2): 190-197.

[11] Leyens C, Peters M, Kaysser W A. Influence of microstructure on oxidation behaviour of near-α titanium alloys[J]. Materials Science and Technology, 1996, 12(3): 213-218.

    Leyens C, Peters M, Kaysser W A. Influence of microstructure on oxidation behaviour of near-α titanium alloys[J]. Materials Science and Technology, 1996, 12(3): 213-218.

[12] Sai Srinadh K V, Singh V. Oxidation behaviour of the near α-titanium alloy IMI 834[J]. Bull in Material Science, 2004, 27(4): 347-354.

    Sai Srinadh K V, Singh V. Oxidation behaviour of the near α-titanium alloy IMI 834[J]. Bull in Material Science, 2004, 27(4): 347-354.

[13] Zhang S Z, Zhou B, Liu N, et al. Effects of microstructure and rare-earth constituent on the oxidation behavior of Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-0.7Nd titanium alloy[J]. Oxidation of Metals, 2014, 81(3/4): 373-382.

    Zhang S Z, Zhou B, Liu N, et al. Effects of microstructure and rare-earth constituent on the oxidation behavior of Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-0.7Nd titanium alloy[J]. Oxidation of Metals, 2014, 81(3/4): 373-382.

[14] Zhou Y, Wen S F, Song B, et al. A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance[J]. Materials & Design, 2016, 89: 1199-1204.

    Zhou Y, Wen S F, Song B, et al. A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance[J]. Materials & Design, 2016, 89: 1199-1204.

[15] 王华明, 张述泉, 王向明. 大型钛合金结构件激光直接制造的进展与挑战[J]. 中国激光, 2009, 36(12): 3204-3209.

    王华明, 张述泉, 王向明. 大型钛合金结构件激光直接制造的进展与挑战[J]. 中国激光, 2009, 36(12): 3204-3209.

    Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Lasers, 2009, 36(12): 3204-3209.

    Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Lasers, 2009, 36(12): 3204-3209.

[16] 钦兰云, 庞爽, 杨光, 等. 激光沉积修复ZL114A铝合金组织和力学性能分析[J]. 中国激光, 2016, 43(12): 1202009.

    钦兰云, 庞爽, 杨光, 等. 激光沉积修复ZL114A铝合金组织和力学性能分析[J]. 中国激光, 2016, 43(12): 1202009.

    Qin L Y, Pang S, Yang G, et al. Microstructure and mechanical property analysis of ZL114A aluminum alloy repaired by laser deposition[J]. Chinese Journal of Lasers, 2016, 43(12): 1202009.

    Qin L Y, Pang S, Yang G, et al. Microstructure and mechanical property analysis of ZL114A aluminum alloy repaired by laser deposition[J]. Chinese Journal of Lasers, 2016, 43(12): 1202009.

[17] 王华明, 张凌云, 李安, 等. 先进材料与高性能零件快速凝固激光加工研究进展[J]. 世界科技研究与发展, 2004, 26(3): 27-31.

    王华明, 张凌云, 李安, 等. 先进材料与高性能零件快速凝固激光加工研究进展[J]. 世界科技研究与发展, 2004, 26(3): 27-31.

    Wang H M, Zhang L Y, Li A, et al. Progress on rapid solidification laser processing for advanced materials and components[J]. World Science-Technology Research & Development, 2004, 26(3): 27-31.

    Wang H M, Zhang L Y, Li A, et al. Progress on rapid solidification laser processing for advanced materials and components[J]. World Science-Technology Research & Development, 2004, 26(3): 27-31.

[18] Liu C M, Tian X J, Tang H B, et al. Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy[J]. Journal of Alloys and Compounds, 2013, 572: 17-24.

    Liu C M, Tian X J, Tang H B, et al. Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy[J]. Journal of Alloys and Compounds, 2013, 572: 17-24.

[19] Zhu Y Y, Liu D, Tian X J, et al. Characterization of microstructure and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Materials & Design, 2014, 56: 445-453.

    Zhu Y Y, Liu D, Tian X J, et al. Characterization of microstructure and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Materials & Design, 2014, 56: 445-453.

[20] Wang T, Zhu Y Y, Zhang S Q, et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing[J]. Journal of Alloys and Compounds, 2015, 632: 505-513.

    Wang T, Zhu Y Y, Zhang S Q, et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing[J]. Journal of Alloys and Compounds, 2015, 632: 505-513.

[21] Du H L, Datta P K, Lewis D B, et al. Air oxidation behaviour of Ti6Al4V alloy between 650 and 850 ℃[J]. Corrosion Science, 1994, 36(4): 631-42.

    Du H L, Datta P K, Lewis D B, et al. Air oxidation behaviour of Ti6Al4V alloy between 650 and 850 ℃[J]. Corrosion Science, 1994, 36(4): 631-42.

[22] Luthra K L. Stability of protective oxide films on Ti-base alloys[J]. Oxidation of Metals, 1991, 36(5): 475-90.

    Luthra K L. Stability of protective oxide films on Ti-base alloys[J]. Oxidation of Metals, 1991, 36(5): 475-90.

[23] Liu Z, Welsch G. Communication: Literature survey on diffusivities of oxygen, aluminum, and vanadium in alpha titanium, beta titanium, and in rutile[J]. Metallurgical Transactions A, 1991, 22(4): 946-948.

    Liu Z, Welsch G. Communication: Literature survey on diffusivities of oxygen, aluminum, and vanadium in alpha titanium, beta titanium, and in rutile[J]. Metallurgical Transactions A, 1991, 22(4): 946-948.