环形激光束形成及高分子材料焊接性能的研究
徐国建, 田希玉, 杭争翔, 麻明章, 李宏利, 刘祥宇. 环形激光束形成及高分子材料焊接性能的研究[J]. 中国激光, 2015, 42(9): 0906001.
Xu Guojian, Tian Xiyu, Hang Zhengxiang, Ma Mingzhang, Li Hongli, Liu Xiangyu. Formation Principle of Ring Laser Beam and Research on Laser Welding of Polymer Materials[J]. Chinese Journal of Lasers, 2015, 42(9): 0906001.
[1] Acherjee B, Misra D, Bose D, et al.. Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology[J]. Optics & Laser Technology, 2009, 41(8): 956-967.
[2] 陈彦宾. 现代激光焊接技术[M]. 北京: 科学出版社, 2005: 64-65.
Chen Yanbin. Modern Laser Welding Technology[M]. Beijing: Science Press, 2005: 64-65.
[3] Kagan V A, Pinho G P. Laser transmission welding of semicrystalline thermoplastic-Part II: Analysis of mechanical performance of welded nylon[J]. Journal of Reinforced Plastic and Composites, 2004, 23(1): 95-107.
[4] Haberstroh E, Lutzeler R. Influence of carbon black pigmentation on the laser beam welding of plastics micro parts[J]. Journal of Polymer Engineering, 2001, 21(2-3): 119-130.
[5] Anon J. Additives aid laser welding[J]. Plastic,Additives and Compounding, 2005, 7(1): 34-35.
[6] 王海林, 黄维玲, 周卓尤, 等. 8 mm 厚不锈钢板的Nd∶YAG 激光焊接[J]. 中国激光, 2003, 30(5): 463-466.
[7] 韦宏, 王传洋. 聚碳酸脂激光透射焊接工艺及性能研究[J]. 中国激光, 2011, 38(11): 1103003.
[8] 张卫, 张庆茂, 郭亮, 等. 激光透射焊接聚碳酸脂接头性能研究[J]. 中国激光, 2012, 39(7): 0703001.
[9] 王霄, 张惠中, 丁国民, 等. 聚丙烯塑料激光透射焊接工艺[J]. 中国激光, 2008, 35(3): 466-471.
[10] Kritskiy A. Laser welding of nylon tubes to plates using conical mirrors[C]. ANTEC, 2009: 1289-1294.
[11] Ussing T, Petersen L V, Nielsen C B, et al.. Micro laser welding of polymer microstructure using low power laser diodes[J]. Int J Adv Manuf Technol, 2007, 33(1-2): 198-205.
[12] Wang X, Zhang C, Wang K, et al.. Multi-objective optimization of laser transmission joining of thermoplastics[J]. Optics & Laser Technology, 2012, 44(8): 2393-2402.
[13] Geriger M, Frick T, Schmidt M. Optical properties of plastics and their role for the modelling of the laser transmission welding process [J]. Production Engineering, 2009, 3(1): 49-55.
[14] This N I R. Additives aid laser welding[J]. Plastics, Additives, Compounding, 2005, 7(1): 34-35.
徐国建, 田希玉, 杭争翔, 麻明章, 李宏利, 刘祥宇. 环形激光束形成及高分子材料焊接性能的研究[J]. 中国激光, 2015, 42(9): 0906001. Xu Guojian, Tian Xiyu, Hang Zhengxiang, Ma Mingzhang, Li Hongli, Liu Xiangyu. Formation Principle of Ring Laser Beam and Research on Laser Welding of Polymer Materials[J]. Chinese Journal of Lasers, 2015, 42(9): 0906001.
PDF全文
