激光复合织构对GCr15/Si3N4摩擦副摩擦学性能的影响
刘硕, 李锦棒, 曾帅帅, 陈鹏飞. 激光复合织构对GCr15/Si3N4摩擦副摩擦学性能的影响[J]. 应用激光, 2018, 38(3): 442.
Liu Shuo, Li Jinbang, Zeng Shuaishuai, Chen Pengfei. Influence of Hybrid Laser Surface Texturing on Tribological Properties of GCr15/Si3N4 Friction Pairs[J]. APPLIED LASER, 2018, 38(3): 442.
[1] 张瑄珺, 李炜, 姜兆华, 等.皮秒激光制备表面微结构加工工艺及耐磨性能研究[J].应用激光, 2017, 37(5): 698-703.
[2] 韩志武, 任露泉, 刘祖斌.激光织构仿生非光滑表面抗磨性能研究[J].摩擦学学报, 2004, 24(4): 289-293.
[3] 历建全, 朱华.表面织构及其对摩擦学性能的影响[J].润滑与密封, 2009, 34(2): 94-97.
[4] 赵文杰, 王立平, 薛群基.织构化提高表面摩擦学性能的研究进展[J].摩擦学学报, 2011, 31(6): 622-631.
[5] 万轶, 熊党生.激光表面织构化改善摩擦学性能的研究进展[J].摩擦学学报, 2006, 26(6): 603-607.
[6] ZHANG H, HUA M, DONG G N, et at.A mixed lubrication model for studying tribological behaviors of surface texturing[J].Tribology International, 2016(93): 583-592.
[7] WOS S, KOSZELA W, PAWLUS P.Determination of oil demand for textured surfaces under conformal contact conditions[J].Tribology International, 2016(93): 602-613.
[8] SHANG Q, YU A, WU J, et at.Influence of heat affected zone on tribological properties of CuSn6 bronze laser dimple textured surface[J].Tribology International, 2017(105): 158-165.
[9] 胡天昌, 丁奇, 胡丽天.激光表面织构化对GCr15钢摩擦磨损性能的影响[J].摩擦学学报, 2011, 31(5): 447-451.
[10] 王晓雷, 王静秋, 韩文非.边界润滑条件下表面微细织构减摩特性的研究[J].润滑与密封, 2007, 32(12): 36-39.
[11] 于如飞, 陈渭.表面织构化在工业摩擦学领域的研究现状与展望[J].机械工程学报, 2017, 53(3): 100-110.
[12] 华希俊, 周万, 吴锦泉, 等.激光微织构表面黏结型固体润滑膜性能研究[J].润滑与密封, 2014, 39(1): 1-4.
[13] WU Z, DENG J, ZHANG H, et at.Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys[J].Wear, 2012, 292-293(29) 135-143.
刘硕, 李锦棒, 曾帅帅, 陈鹏飞. 激光复合织构对GCr15/Si3N4摩擦副摩擦学性能的影响[J]. 应用激光, 2018, 38(3): 442. Liu Shuo, Li Jinbang, Zeng Shuaishuai, Chen Pengfei. Influence of Hybrid Laser Surface Texturing on Tribological Properties of GCr15/Si3N4 Friction Pairs[J]. APPLIED LASER, 2018, 38(3): 442.