激光选区熔化成型免组装机构的间隙特征研究
刘洋, 杨永强, 王迪, 杨雄文, 刘睿诚. 激光选区熔化成型免组装机构的间隙特征研究[J]. 中国激光, 2014, 41(11): 1103007.
Liu Yang, Yang Yongqiang, Wang Di, Yang Xiongwen, Liu Ruicheng. Study on the Clearance Feature of Non-Assembly Mechanism Manufactured by Selective Laser Melting[J]. Chinese Journal of Lasers, 2014, 41(11): 1103007.
[1] 宋长辉, 杨永强, 叶梓恒, 等. 基于选区激光熔化快速成型的自由设计与制造进展[J]. 激光与光电子学进展, 2013, 50(8): 229-234.
Song Changhui, Yang Yongqiang, Ye Ziheng, et al.. Development of freeform design and manufacturing based on selective laser melting[J]. Laser& Optoelectronics Progress, 2013, 50(8): 229-234.
[2] 吴伟辉, 杨永强. 选区激光熔化快速成形系统的关键技术[J]. 机械工程学报, 2007, 43(8): 175-180.
Wu Weihui, Yang Yongqiang. Key technology of selective laser melting rapid prototyping system[J]. Chinese J Mechanical Engineering, 2007, 43(8): 175-180.
[3] 杨永强, 何兴容, 吴伟辉. 选区激光熔化直接成型个性化骨科手术模板[J]. 中国激光, 2009, 36(9): 2460-2464.
[4] Wang Di, Yang Yongqiang, Ye Ziheng, et al.. Research on the fabricating quality optimization of the overhanging surface in SLM process[J]. Int J Adv Manuf Technol, 2013, 65: 1471-1484.
[5] 刘杰, 杨永强, 王迪, 等. 选区激光熔化成型悬垂结构的计算机辅助工艺参数优化[J]. 中国激光, 2012, 39(5): 0503001.
[6] C Mavroidis, K J De Laurentis, J Won. Fabrication of non-assembly mechanisms and robotic systems using rapid prototyping[J]. J Mech Des, 2001, 123(4): 516-524.
[7] K J De Laurentis, C Mavroidis. Rapid fabrication of a non-assembly robotic hand with embedded components[J]. Assembly Automation, 2004, 24(4): 394-405.
[8] J Calì, D A Calian, C Amati, et al.. 3D-printing of non-assembly, articulated models[J]. ACM Transactions on Graphics, 2012, 31(6): 1-8.
[9] Xubin Su, Yongqiang Yang, Dongming Xiao, et al.. Processability investigatation of non-assembly mechanisms for powder bed fusion process[J]. Int J Adv Manuf Technol, 2013, 64: 1193-1200.
[10] H Lipson, F Moon, J Hai, et al.. 3-D printing the history of mechanisms[J]. J Mech Des, 2005, 127( 5): 1029-1033.
[11] Y Chen, J Lu. Minimise joint clearance in rapid fabrication of non-assembly mechanisms[J]. Int J Computer Integrated Manufacturing, 2011, 24(8): 726-734.
[12] 苏旭彬, 杨永强, 王迪, 等. 免组装机构的选区激光熔化直接成型工艺研究[J]. 中国激光, 2011, 38(6): 0603021.
刘洋, 杨永强, 王迪, 杨雄文, 刘睿诚. 激光选区熔化成型免组装机构的间隙特征研究[J]. 中国激光, 2014, 41(11): 1103007. Liu Yang, Yang Yongqiang, Wang Di, Yang Xiongwen, Liu Ruicheng. Study on the Clearance Feature of Non-Assembly Mechanism Manufactured by Selective Laser Melting[J]. Chinese Journal of Lasers, 2014, 41(11): 1103007.