Enhancement of laser ablation via interacting spatial double-pulse effect

Rui Zhou; Shengdong Lin; Ye Ding; Huan Yang; Kenny Ong Yong Keng; Minghui Hong

doi:doi:10.29026/oea.2018.180014

Opto-Electronic Advances, 2018, 1 (8): 180014, Published Online: Jan. 10, 2019

Enhancement of laser ablation via interacting spatial double-pulse effect

Rui Zhou ^1,*Shengdong Lin ¹Ye Ding ^2,3Huan Yang ^2,4Kenny Ong Yong Keng ²Minghui Hong ²

Author Affiliations

¹ Department of Mechanical and Electrical Engineering, School of Aerospace Engineering, Xiamen University, Xiamen 361102, China

² Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576

³ School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China

⁴ College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou, 325035, China

Copy Citation Text

Rui Zhou, Shengdong Lin, Ye Ding, Huan Yang, Kenny Ong Yong Keng, Minghui Hong. Enhancement of laser ablation via interacting spatial double-pulse effect[J]. Opto-Electronic Advances, 2018, 1(8): 180014.

References

[1] I A Choudhury, S Shirley. Laser cutting of polymeric materials: an experimental investigation. Opt Laser Technol, 2010, 42: 503-508.

[2] A Ancona, S Döring, C Jauregui, F Röser, J Limpert, et al.. Femtosecond and picosecond laser drilling of metals at high repetition rates and average powers. Opt Lett, 2009, 34: 3304-3306.

[3] I Miyamoto, K Cvecek, Y Okamoto, M Schmidt. Internal modification of glass by ultrashort laser pulse and its application to microwelding. Appl Phys A, 2014, 114: 187-208.

[4] Y J Lee, H C Kuo, T C Lu, S C Wang, K W Ng, et al.. Study of GaN-based light-emitting diodes grown on chemical wet-etching-patterned sapphire substrate with V-shaped pits roughening surfaces. J Lightwave Technol, 2008, 26: 1455-1463.

[5] D Hyypio. Mitigation of bearing electro-erosion of inverter-fed motors through passive common-mode voltage suppression. IEEE Trans Ind Appl, 2005, 41: 576-583.

[6] H Y Meng, J H Liao, Y H Zhou, Q M Zhang. Laser micro-processing of cardiovascular stent with fiber laser cutting system. Opt Laser Technol, 2009, 41: 300-302.

[7] W Watanabe, Y Li, K Itoh. Ultrafast laser micro-processing of transparent material. Opt Laser Technol, 2016, 78: 52-61.

[8] N H Rizvi, P Apte. Developments in laser micro-machining techniques. J Mater Process Technol, 2002, 127: 206-210.

[9] B H Lu, H B Lan, H Z Liu. Additive manufacturing frontier: 3D printing electronics. Opto-Electron Adv, 2018, 1: 170004.

[10] K C Xu, C T Zhang, R Zhou, R Ji, M H Hong. Hybrid micro/nano-structure formation by angular laser texturing of Si surface for surface enhanced Raman scattering. Opt Express, 2016, 24: 10352-10358.

[11] M H Mahdieh, M Nikbakht, Moghadam Z Eghlimi, M Sobhani. Crater geometry characterization of Al targets irradiated by single pulse and pulse trains of Nd:YAG laser in ambient air and water. Appl Surf Sci, 2010, 256: 1778-1783.

[12] J König, S Nolte, A Tünnermann. Plasma evolution during metal ablation with ultrashort laser pulses. Opt Express, 2005, 13: 10597-10607.

[13] T H R Crawford, A Borowiec, H K Haugen. Femtosecond laser micromachining of grooves in silicon with 800 nm pulses. Appl Phys A, 2005, 80: 1717-1724.

[14] N M Bulgakova, A V Bulgakov. Pulsed laser ablation of solids: transition from normal vaporization to phase explosion. Appl Phys A, 2001, 73: 199-208.

[15] M Zhou, Y K Zhang, L Cai. Laser shock forming on coated metal sheets characterized by ultrahigh-strain-rate plastic deformation. J Appl Phys, 2002, 91: 5501-5503.

[16] C Gerhard, S Roux, S Brückner, S Wieneke, W Viöl. Atmospheric pressure argon plasma-assisted enhancement of laser ablation of aluminum. Appl Phys A, 2012, 108: 107-112.

[17] S Kajita, N Ohno, S Takamura, W Sakaguchi, D Nishijima. Plasma-assisted laser ablation of tungsten: reduction in ablation power threshold due to bursting of holes/bubbles. Appl Phys Lett, 2007, 91: 261501.

[18] V I Babushok, Jr F C DeLucia, J L Gottfried, C A Munson, A W Miziolek. Double pulse laser ablation and plasma: laser induced breakdown spectroscopy signal enhancement. Spectrochim Acta Part B: At Spectrosc, 2006, 61: 999-1014.

[19] E D Jansen, T Asshauer, M Frenz, M Motamedi, G Delacrétaz, et al.. Effect of pulse duration on bubble formation and laser-induced pressure waves during holmium laser ablation. Lasers Surg Med, 1996, 18: 278-293.

Enhancement of laser ablation via interacting spatial double-pulse effect

关于本站 Cookie 的使用提示

全站搜索

Enhancement of laser ablation via interacting spatial double-pulse effect

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索