[1] 虞祖良,金国藩.计算机制全息图［M］.北京:清华大学出版社, 1984:1-3.(Yu Zuliang, Jin Guofan. Computer generated holograms. Beijing: Tsinghua University Press, 1984:1-3)

[2] Su Ping, Kang Guoguo, Tan Qiaofeng, et al. Estimation and optimization of computer-generated hologram in null test of free form surface［J］. Chin Opt Lett, 2009, 7(11):1097-1100.

[3] 苏萍,谭峭峰,康果果,等.自由曲面零补偿计算全息图离散相位的B样条拟合［J］.光学学报, 2010, 30(6):1767-1771.(Su Ping, Tan Qiaofeng, Kang Guoguo, et al. B-spline interpolation of scattered phase data of computer generated hologram for null test of freeform surface. Acta Optica Sinica, 2010, 30(6):1767-1771)

[4] 施法中.计算机辅助几何设计与非均匀有理B样条［M］.北京:高等教育出版社, 2001:211-260.(Shi Fazhong. CAGD&NURBS. Beijing: Higher Education Press, 2001:211-260)

[5] 张超.自由曲面的造型及数控加工［D］.西安:西安理工大学, 2001:19-30.(Zhang Chao. The freeform surface sculpting and numerical control machining. Xi’an: Xi’an University of Technology, 2001:19-30)

[6] Cao Hui, Sun Junqiang, Chen Guojie. Bicubic uniform B-spline wavefront fitting technology applied in computer generated holograms［C］//Proc of SPIE. 2006:61491A.

[7] 李世杰,陈强,吴高峰,等.计算全息检测离轴非球面的离散相位计算［J］.强激光与粒子束, 2011, 23(12):3163-3166.(Li Shijie, Chen Qiang, Wu Gaofeng, et al. Discrete phase calculation of computer generated hologram for off-axis aspheric test. High Power Laser and Particle Beams, 2011, 23(12):3163-3166)

[8] 欧志英,邬再新,胡赤兵,等.散点数据曲面拟合的应用［J］.甘肃工业大学学报, 2000, 26(1):101-103.(Ou Zhiying, Wu Zaixin, Hu Chibing, et al. Application of discrete data curved surface fitting. Journal of Gansu University of Technology, 2000, 26(1):101-103)

[9] 李永桥,谌永祥.基于AutoCAD的双三次B样条曲面数控加工系统的设计与研究［J］.机床与液压, 2009, 37(4):19-21.(Li Yongqiao, Chen Yongxiang. Research on design of NC machining system for Bi-cubic B-spline curved surface based on AutoCAD. Machine Tool and Hydraulics, 2009, 37(4):19-21)

[10] 陈吉清,兰凤崇,林建国.非四边(N边)域曲面造型方法的研究及在汽车外形设计中的应用［J］.机械工程学报, 2005, 41(5):69-73.(Chen Jiqing, Lan Fengchong, Lin Jianguo. Construction of non-four-sided patches and application in autobody design. Chinese Journal of Mechanical Engineering, 2005, 41(5):69-73)

[11] 仝光,叶本刚,田玉冬.三次准均匀B样条在地形数据拟合中的应用［J］.上海电机学院学报, 2007, 10(3):217-220.(Tong Guang, Ye Bengang, Tian Yudong. Application of cubic quasi-uniform B-spline in 3D terrain data fitting. Journal of Shanghai Dianji University, 2007, 10(3):217-220)

[12] 冀世军.反求工程的NURBS曲面拼接与拟合技术研究［D］.哈尔滨:哈尔滨工业大学, 2008:98-106.(Ji Shijun. Research on the key techniques of NURBS surface merging and fitting in reverse engineering. Harbin: Harbin Institute of Technology, 2008:98-106)