[1] WANG G L,LI SH Y,DAI Y F. Design method and accuracy analysis of aspherical optical compound machine tool[J]. 中国机械工程,2004,15(2): 99-102.(in Chinese)

    王贵林,李圣怡,戴一帆.光学非球面复合加工机床的设计与精度分析[J].中国机械工程,2004,15(2): 99-102.

[2] 袁巨龙,吴喆,吕冰海,等.非球面超精密抛光技术研究现状[J].机械工程学报,2012,48(23): 167-177.

    YUAN J L,WU ZH,LV Ｂ H,et al.. Review on ultra-precision polishing technology of aspheric surface[J]. J. Mechanical Engineering,201248(23): 167-177.(in Chinese)

[3] 潘超,陈家璧,张荣福,等.用位相板实现景深延拓的原理与模拟实验研究[J].光子学报,2009,38(7): 1679-1682.

    PAN CH,CHEN J B,ZHANG R F,et al.. Study on principle and simulation of extending of depth of field with phase plate[J]. Acta Photonica Sinica,2009,38(7): 1679-1682.(in Chinese)

[4] BEAUCAMP A, FREEMAN R, MORTON R,et al.. Removal of diamond-turning signatures on X-ray mandrels and metal optics by fluid-jet polishing[J]. SPIE,2008,7018: 351-359.

[5] GAO SH, KANG R K, GUO D M,et al.. Study on the subsurface damage distribution of the silicon wafer ground by diamond wheel[J]. Advanced Materials Research,2010,126-128: 113-118.

[6] SURATWALA T I, WONG L L, MILLER P E,et al.. Sub-surface mechanical damage distributions during grinding of fused silica[J]. J. Non-Crystalline Solids,2006,352(52-54): 5601-5617.

[7] 张健, 代雷, 王飞, 等.小磨头自适应抛光抑制高精度非球面中频误差[J].光学学报, 2013,33(8): 0822022.

    ZHANG J,DAI L,WNAG F,et al.. Restraint of mid-spatial-frequency aspheric surface by small-tool aptive polishing[J]. Acta Optica Sinica,2013,33(8): 0822022.(in Chinese)

[8] 高松涛, 王高文, 张健, 等.用计算全息图校正非球面的畸变[J].光学 精密工程, 2013,21(8): 1929-1935.

    GAO S T,WANG G W,ZHANG J,et al.. Correction of distortion in asphere testing with computer-generated hologram[J]. Opt. Precision Eng.,2013,21(8): 1929-1935.(in Chinese)

[9] 曲兴田, 王宏一, 樊成, 等.重叠率螺旋线的非球面抛光轨迹规划[J].西安交通大学学报,2015,49(6): y1-y7.

    QU X T,WANG H Y,FAN CH,et al.. Uniform-overlap-rate spiral path for aspheric polishing[J]. J. Xi′an Jiaotong University,2015,49(6): y1-y7.(in Chinese)

[10] 周旭升, 李圣怡, 戴一帆,等.光学表面中频误差的控制方法-确定区域修正法[J].光学 精密工程, 2007, 15(11): 1668 -1673.

    ZHOU X SH, LI SH Y, DAI Y F,et al.. Correcting errors indefinite area: a new method for controlling mid-spatial-frequency errors in optical surface[J]. Opt. Precision Eng., 2007, 15(11): 1668-1673.(in Chinese)

[11] 邓伟杰,张峰,郑立功.边缘效应的去除函数模型及实验[J].红外与激光工程,2011,40(9): 1473-1478.

    DENG W J,ZHANG F,ZHENG L G. Removal functionmodel and experiment of edge effect[J]. Infrared and Laser Engineering,2011,40(9): 1743-1748.(in Chinese)

[12] 孔繁星,于正林,朴承镐,等.基于UMAC加工非球面光学零件PVT控制轨迹研究[J].长春理工大学学报,2009,32(2): 196-206.

    KONG F X,YU ZH L,PIAO CH H,et al.. J. Research on PVT control trajectory of processing aspheric optical parts based on UMAC[J]. J. Changchun University of Science and Technology,2009,32(2): 196-206.(in Chinese)

[13] 胡陈林,毕果,叶卉,等.光学元件磨削加工亚表面损伤检测研究[J].人工晶体学报2014,43(11): 2929-2934.

    HU CH L,BI G,YE H,et al.. Research on detection of subsurface damage on grinding optical elements[J]. J. Synthetic Crystals,2014,43(11): 2929-2934.(in Chinese)

[14] GENIN F Y, SALLEO A, PISTOR T V,et al.． Role of light intensification by cracks in optical breakdown on surfaces[J]. J. American Ceramic Society, 2001, 18(10): 2607-2616.

[15] 王贵林.光学材料超精密研抛关键技术研究[D].长沙: 国防科学技术大学, 2002.

    WANG G L. A study on key techniques in ultraprecision lapping and polishing for optical SIC materials[D]. Changsha: National University of Defense Technology,2002.(in Chinese)

[16] 马占龙, 王君林.超高精度光学元件加工技术[J].红外与激光工程,42(6): 1485-1490.

    MA ZH L,WANG J L. Ultra-precision optical fabrication technology[J]. Infrared and Laser Engineering,42(6): 1485-1490.(in Chinese)