[1] YILMAZ O, GINDY N, GAO J. A repair and overhaul methodology for aeroengine components［J］.Robotics and Computer-Integrated Manufacturing, 2010, 26(2): 190-201.

[2] 陆佳艳, 熊昌友, 何小妹, 等. 航空发动机叶片型面测量方法评述［J］. 计测技术, 2009, 29(3):1-3.

    LU Jia-yan, XIONG Chang-you, HE Xiao-mei, et al. Survey of measurement method of aero-engine blade［J］. Metrology & Measurement Technology, 2009, 29(3): 1-3.

[3] 王心坚, 周军. 叶片型面激光检测专机的运动轨迹规划与检测研究［J］. 机电工程, 2015, 32(11):1453-1458.

    WANG Xin-jian, ZHOU Jun. Motion path planning and inspection realizing of laser inspection machine for blade-surface［J］. Journal of Mechanical &Electrical Engineering, 2015, 32(11): 1453-1458.

[4] 于之靖, 宋四同, 王涛. 基于逆向工程的航空发动机叶片数字化建模［J］. 机床与液压, 2011, 39(17):122-125.

    YU Zhi-jing, SONG Si-tong, WANG Tao. Digital modeling of aircraft engine blade based on reverse engineering［J］. Machine Tool & Hydraulics, 2011, 39(17): 122-125.

[5] 张文建, 彭一男, 张琦. 三坐标测量机在反求工程中的研究［J］. 机械设计与研究, 2010, 37(8):18-20.

    ZHANG Wen-jian, PENG Yi-nan, ZHANG Qi. Research on reverse engineering in coordinate measuring machine［J］. Journal of Machine Design and Research, 2010, 37(8): 18-20.

[6] 谢雪冬, 肖胜兵, 牛曙光, 等. ATOS扫描仪对汽车的扫描测量［J］. 现代制造工程, 2009, (8):94-97.

    XIE Xue-dong, XIAO Sheng-bing, NIU Shu-guang, et al. Automotive scanning measure based on ATOS［J］. Modern Manufacturing Engineering, 2009, (8): 94-97.

[7] ZHANG F, JIANG Z D, LI B, et al. Error modeling and compensation for high-precision non-contact four coordinate measuring system［M］. Trans Tech Publications, 2010: 232-236.

[8] 李妙玲, 朱春熙, 尤惠媛. 航空发动机叶片叶身型面测具设计及准确度分析［J］. 制造技术与机床, 2011, (1):113-116.

    LI Miao-ling, ZHU Chun-xi, YOU Hui-yuan. Design and precise analysis of measuring tool for profiles of an aircraft engine blade working［J］. Technology and Test, 2011, (1): 113-116.

[9] 叶建友, 吕彦明, 陈林. 汽轮机叶片三坐标自动测量研究综述［J］. 工具技术, 2014, 48(8):10-12.

    YE Jian-you, LV Yan-ming, CHEN Lin. Review of research on automatic positioning of turbine blades with CMM［J］. Tool Engineering, 2014, 48(8): 10-12.

[10] 黄强先, 余夫领, 宫二敏, 等. 零阿贝误差的纳米三坐标测量机工作台及误差分析［J］. 光学 精密工程, 2013, 21(3):664-670.

    HUANG Qiang-xian, YU Fu-ling, GONG Er-min, et al. Nano-CMM stage with zero Abbe error and its error analysis［J］.Optics and Precision Engineering, 2013, 21(3): 664-670.

[11] HUANG J, WANG Z, GAO J, et al. Overview on the profile measurement of turbine blade and its development［C］. International Society for Optics and Photonics, 2010: 76560L-76560L-76511.

[12] 卢艳平, 王珏, 喻洪麟. 工业CT图像的三维图像处理与分析系统［J］. 仪器仪表学报, 2009, 32(2):444-448.

    LU Yan-ping, WANG Jue, YU Hong-lin. 3D image processing and analyzing system for industrial computed tomography［J］. Chinese Journal of Scientific Instrument, 2009, 32(2): 444-448.

[13] CARMIGNATO S. Accuracy of industrial computed tomography measurements: Experimental results from an international comparison［J］. CIRP Annals-Manufacturing Technology, 2012, 61(1): 491-494.

[14] SHEN L, LI D, LUO F. A study on laser speckle correlation method applied in triangulation displacement measurement［J］. Optik-International Journal for Light and Electron Optics, 2013, 124(20): 4544-4548.

[15] BIN S, BING L. A rapid method to achieve aero-engine blade form detection［J］. Sensors, 2015, 15(6): 12782-12801.

[16] 夏名祥, 石光林, 陈晨, 等. 逆向工程与激光制造技术在工艺品上的应用研究［J］. 广西科技大学学报, 2016, 27(3):45-49.

    XIA Ming-xiang, SHI Guang-lin, CHEN Chen, et al. Application and research of reverse engineering and laser manufacturing technology in the arts and crafts［J］. Journal of Guangxi University of Science And Technology, 2016, 27(3): 45-49.

[17] CHAUDHURY K. Acceleration of the shiftable algorithm for bilateral filtering and nonlocal means［J］. IEEE Transactions on Image Process, 2013, 22(4): 1291-1300.

[18] 武鹏飞, 张赞, 郑义, 等. 采样点分布对基于面形斜率径向基模型的自由曲面拟合精度的影响［J］. 光学 精密工程, 2016, 24(7):1564-1572.

    WU Peng-fei, ZHANG Zan, ZHENG Yi, et al. Influence of sampling point distribution in freeform surfaces fitting with radial based function model[10]. Optics and Precision Engineering, 2016, 24(7): 1564-1572.

[19] 叶晶, 平雪良, 陶宇, 董宁. 移动最小二乘法在NURBS曲线拟合中的应用［J］. 工具技术, 2011, 45(1):34-36.

    YE Jing, PING Xue-liang, TAO Yu, et al. Moving least-square method applied in NURBS curve fitting［J］. Tool Engineering, 2011, 45(1): 34-36.