[1] 麦淑珍, 杨永强, 王迪. 激光选区熔化成型NiCr合金曲面表面形貌及粗糙度变化规律研究[J]. 中国激光, 2015, 42(12): 1203004.

    Mai Shuzhen, Yang Yongqiang, Wang Di. Study on surface morphology and roughness variation of NiCr alloy curved surface manufactured by selective laser melting[J]. Chinese J Lasers, 2015, 42(12): 1203004.

[2] 宋长辉, 杨永强, 叶梓恒, 等. 基于选区激光熔化快速成型的自由设计与制造进展[J]. 激光与光电子学进展, 2013, 50(8): 080026.

    Song Changhui, Yang Yongqiang, Ye Ziheng, et al. Development of freeform design and manufacturing based on selective laser melting[J]. Laser & Optoelectronics Progress, 2013, 58(8): 080026.

[3] Wehmller M, Warnke P H, Zilian C, et al. Implant design and production-A new approach by selective laser melting[J]. Proceedings of the 19th International Congress and Exhibition, 2005,1281: 690-695.

[4] Campbell I, Bourell D, Gibson I. Additive manufacturing: Rapid prototyping comes of age[J]. Rapid Prototyping Journal, 2012, 18(4): 255-258.

[5] 黄小毛, 叶春生, 黄伟军, 等. 激光快速成形正多边形格子扫描路径的生成算法[J]. 锻压技术, 2013, 38(3): 152-155.

    Huang Xiaomao, Ye Chunsheng, Huang Weijun, et al. Planning algorithm of regular polygon grid path for laser rapid prototyping[J]. Forging & Stamping Technology, 2013, 38(3): 152-155.

[6] 钱波, 张李超, 黄树槐. 基于平面多边形Voronoi图的算法与快速成形应用[J]. 华中科技大学学报, 2008, 36(1): 125-128.

    Qian Bo, Zhang Lichao, Huang Shuhuai. Voronoi diagrams algorithm based on polygon and in the rapid prototyping applications[J]. Journal of Huazhong University of Science and Technology, 2008, 36(1): 125-128.

[7] Parry L, Ashcroft I, Bracket D, et al. Investigation of residual stresses in selective laser melting[J]. Key Engineering Materials, 2015, 627: 129-132.

[8] 陈德宁, 刘婷婷, 廖文和, 等. 扫描策略对金属粉末选区激光熔化温度场的影响[J]. 中国激光, 2016, 43(4): 0403003.

    Chen Dening, Liu Tingting, Liao Wenhe, et al. Temperature field during selective laser melting of metal powder under different scanning strategies[J]. Chinese J Lasers, 2016, 43(4): 0403003.

[9] Senthilkumaran K, Pandey P M, Rao P V M. Influence of building strategies on the accuracy of parts in selective laser sintering[J]. Materials & Design, 2009, 30(8): 2946-2954.

[10] Dai K, Shaw L. Distortion minimization of laser-processed components through control of laser scanning patterns[J]. Rapid Prototyping Journal, 2002, 8(5): 270-276.

[11] Matsumoto M, Shiomi M, Osakada K, et al. Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing[J]. International Journal of Machine Tools and Manufacture, 2002, 42(1): 61-67.

[12] 陈鸿, 张志钢, 程军. SLS快速成型工艺激光扫描路径策略研究[J]. 应用基础与工程科学学报, 2001, 9(2): 202-207.

    Chen Hong, Zhang Zhigang, Cheng Jun. Scanning path scheme for SLS RP system[J]. Journal of Basic Science and Engineering, 2001, 9(2): 202-207.

[13] 张曼. RP中扫描路径的生成与优化研究[D]. 西安: 西安科技大学, 2006.

    Zhang Man. Study on generation and optimization for scanning path in RP[D]. Xi′an: Xi′an University of Science, 2006.

[14] Lu Y J, Wu S Q, Gan Y L, et al. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy[J]. Optics & Laser Technology, 2015, 75: 197-206.

[15] 王迪, 杨永强, 黄延禄， 等. 选区激光熔化直接成型金属零件致密度的改善[J]. 华南理工大学学报, 2010, 38(6): 107-111.

    Wang Di, Yang Yongqiang, Huang Yanlu, et al. Density improvement of metal parts directly fabricated via selective laser melting[J]. Journal of South China University of Technology, 2010, 38(6): 107-111.

[16] 赵进炎, 仇毅, 刘富荣, 等. SLM成型医用钴铬合金的表面粗糙度与致密度研究[J]. 应用激光, 2014, 34(6): 524-527.

    Zhao Jinyan, Qiu Yi, Liu Furong, et al. Research of surface roughness and relative density of SLM medical Co-Cr alloy[J]. Applied Laser, 2014, 34(6): 524-527.