超声辅助钛合金激光沉积成形试验研究 下载: 681次
钦兰云, 王维, 杨光. 超声辅助钛合金激光沉积成形试验研究[J]. 中国激光, 2013, 40(1): 0103001.
Qin Lanyun, Wang Wei, Yang Guang. Experimental Study on Ultrasonic-Assisted Laser Metal Deposition of Titanium Alloy[J]. Chinese Journal of Lasers, 2013, 40(1): 0103001.
[1] 王华明, 张述泉, 王向明. 大型钛合金结构件激光直接制造的进展与挑战[J]. 中国激光, 2009, 36(12): 3204~3209
[2] 陈静, 杨海鸥, 李延民 等. 激光快速成形过程中熔覆层的两种开裂行为及其机理研究[J]. 应用激光, 2002, 22(3): 300~304
[3] 王俊伟, 陈静, 刘彦红 等. 激光立体成形TC17钛合金组织研究[J]. 中国激光, 2010, 37(3): 847~851
[4] 陈志坤, 刘敏, 曾德长. 激光熔覆裂纹的产生原因及消除方法探究[J]. 激光杂志, 2009, 30(1): 55~56
Chen Zhikun, Liu Min, Zeng Dechang. Research on formation causes and elimination methods of the laser cladding cracks[J]. Laser Journal, 2009, 30(1): 55~56
[5] 余本海, 胡雪惠, 吴玉娥 等. 电磁搅拌对激光熔覆WC-Co基合金涂层的组织结构和硬度的影响及机理研究[J]. 中国激光, 2010, 37(10): 2672~2677
[6] 秦雷. 消除焊接残余应力的超声冲击设备的设计与研究[D]. 沈阳: 东北大学, 2008. 1~20
Qin Lei. Design and Research of Ultrasonic Impacting Equipment for Relieving Welding Residual Stress[D]. Shenyang: Northeastern University, 2008. 1~20
[7] 管建军, 宋天民, 张国福 等. 机械振动对焊接熔池金属凝固过程的影响[J]. 辽宁石油化工大学学报, 2001, 21(4): 51~54
Guan Jianjun, Song Tianmin, Zhang Guofu et al.. The effect of mechanical vibration on solidification of weld pool metal[J]. Journal of Liaoning University of Petroleum & Chemical Technology, 2001, 21(4): 51~54
[8] 程源. 焊接应力、变形及其振动消除研究[D]. 大连:大连理工大学, 1999. 21~32
Cheng Yuan. The Research on Welding Stress、Deformation and Vibration to Eliminate[D]. Dalian: Dalian University of Technology, 1999. 21~32
[9] 陈畅源, 邓琦林, 宋建丽. Ni含量及超声振动对激光熔覆中裂纹的影响[J]. 南京航空航天大学学报, 2005, 37(11): 44~48
Chen Changyuan, Deng Qilin, Song Jianli. Influence of Ni content and ultrasonic vibration to cracks in process of laser cladding[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2005, 37(11): 44~48
[10] 李军文, 桃野正, 付莹. 超声波功率对铸锭内的气孔及组织细化的影响[J]. 铸造, 2007, 56(2): 152~154
Li Junwen, Tao Yezheng, Fu Ying. Effect of ultrasonic power on density and refinement in aluminum ingot[J]. China Foundry, 2007, 56(2): 152~154
[11] 陈畅源, 邓琦林, 宋建丽. 超声振动对激光熔覆过程的影响[J]. 电加工与模具, 2005, (3): 37~40
Chen Changyuan, Deng Qilin, Song Jianli. The influence of ultrasonic vibration on the process of laser clading[J]. Electromachining & Mould, 2005, (3): 37~40
[12] 杨光. 钛基功能梯度材料激光快速成形技术研究[D]. 沈阳: 中国科学院沈阳自动化研究所, 2010. 56~70
Yang Guang. Fabrication of Ti Matrix FGM Using Laser Metal Deposition Technique[D]. Shenyang: Shenyang Institute of Automation Chinese Academy of Sciences, 2010. 56~70
[13] 龙日升, 刘伟军, 汴宏友 等. 扫描方式对激光金属沉积成形过程热应力的影响[J]. 机械工程学报, 2007, 43(11): 74~81
Long Risheng, Liu Weijun, Bian Hongyou et al.. Effects of scanning methods on thermal stress during laser metal deposition shaping[J]. Chinese Journal of Mechanical Engineering, 2007, 43(11): 74~81
[14] 陆才善. 残余应力测试[M]. 西安: 西安交通大学出版社, 1991
Lu Caishan. Measure of Residual Stress[M]. Xi′an: Xi′an Jiaotong University Press, 1991
钦兰云, 王维, 杨光. 超声辅助钛合金激光沉积成形试验研究[J]. 中国激光, 2013, 40(1): 0103001. Qin Lanyun, Wang Wei, Yang Guang. Experimental Study on Ultrasonic-Assisted Laser Metal Deposition of Titanium Alloy[J]. Chinese Journal of Lasers, 2013, 40(1): 0103001.