[1] 《工程材料实用手册》编辑委员会.工程材料使用手册, 第4卷, 钛合金铜合金[s].2版.北京: 中国标准出版社, 2002: 74.

[2] V. Cain, L. Thijsc, J. Van Humbeeckc, et al.Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting[J].Additive Manufacturing, 2015(5): 68-76.

[3] PAYDAS H, MERTENS A, CARRUS R, et al.Laser cladding as repair technology for Ti-6Al-4V alloy: influence of building strategy on microstructure and hardness [J].Materials & Design, 2015(85): 497-510.

[4] 张霜银, 林鑫, 陈静, 等.工艺参数对激光快速成形TC4钛合金组织及成形质量的影响[J].稀有金属材料与工程, 2007, 36(10): 1839-1843.

[5] 宫新勇, 刘铭坤, 李岩, 等.TC11钛合金零件的激光熔化沉积修复研究[J].中国激光, 2012, 39(2): 0203005.

[6] 马陶然, 王华明.激光沉积Ti60A高温钛合金显微组织及固态相变[J].材料热处理学报, 2012(33): 1-6.

[7] REN H S, TIAN X J, LIU D, et al.Microstructural evolution and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J].Transactions of Nonferrous Metals Society of China, 2015, 25(6): 1856-1864.

[8] RAMESH R, MUTHUKANNAN D, VIJAY P, et al.Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition[J].Materials Science and Engineering: A, 2015(643): 64-71.

[9] FOKES J A.Developments in laser surface modification and coating[J].Surface and Coating Technology, 1994, 23(3): 65-71.

[10] WYCISK E,SOLBACH A,SIDDIQUE S,et al.Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties[J].Physics Procedia, 2014(56): 371-378.

[11] QIN D Y, LU Y F.Transgranular shearing introduced brittlement of Ti-5Al-5V-5Mo-3Cralloy with full lamellar structure at room temperature [J].Materials Science & Engineering A, 2013(572): 19-24.

[12] 胡芳友, 卢长亮, 等.激光熔铸修理与变形强化对铝合金疲劳性能影响研究[J].应用激光, 2008, 28(2): 112-114.

[13] 席明哲, 高士友.激光快速成形TA15钛合金热处理组织及其力学性能[J].中国激光, 2012, 39(1): 0103007.

[14] 谢旭霞, 张述泉, 汤海波, 等.退火温度对激光熔化沉积TA15钛合金组织和性能的影响[J].稀有金属材料与工程, 2008, 37(9): 1510-1515.

[15] 薛蕾, 陈静, 林鑫, 等.激光快速修复 Ti-6Al-4V 合金的显微组织与力学性能[J].稀有金属材料与工程, 2007, 36(16): 989-993.

[16] 崔约贤, 王长利.金属断口分析[M].哈尔滨: 哈尔滨工业大学出版社, 1998.