[1] Lee J E, Bae D H, Chung W S, et al.. Effects of annealing on the mechanical and interface properties of stainless steel/aluminum/copper clad-metal sheets[J]. Journal of Materials Processing Technology, 2007, 187-188(3): 546-549.

[2] 刘晓涛, 张廷安, 崔建忠. 层状技术复合材料生产工艺及其新进展[J]. 材料导报, 2002, 16(7): 41-43.

    Liu Xiaotao, Zhang Tingan, Cui Jianzhong. Technology of clad metal production and its latest progress[J]. Materials Review, 2002, 16(7): 41-43.

[3] 田广民, 李选明, 赵永庆, 等. 层状金属复合材料加工技术研究现状[J]. 中国材料进展, 2013, 32(11): 696-700.

    Tian Guangmin, Li Xuanming, Zhao Yongqing, et al.. Research status of processing technology of laminated metal composite[J]. Materials China, 2013, 32(11): 696-700.

[4] Vaccari J A. The promise of laser forming[M]. Cleveland: American Machinist, 1993: 36-38.

[5] 刘顺洪, 胡乾午, 周龙早, 等. 激光弯曲成形Ti-7Al-2Zr-2Mo-2V的组织及性能研究[J]. 中国激光, 2002, 29(11): 1049-1053.

    Liu Shunhong, Hu Qianwu, Zhou Longzao, et al.. Investigation on micro-structure and property of laser bent Ti-7Al-2Zr-2Mo-2V[J]. Chinese J Lasers, 2002, 29(11): 1049-1053.

[6] 马绪鹏, 王续跃, 徐文骥, 等. 不锈钢-碳钢层合板激光弯折区热传导特性[J]. 激光与光电子学进展, 2013, 50(10): 101401.

    Ma Xupeng, Wang Xuyue, Xu Wenji, et al.. Heat conduction characteristics of stainless steel-carbon steel laminated sheet bending position[J]. Laser & Optoelectronics Progress, 2013, 50(10): 101401.

[7] 马绪鹏, 王续跃, 徐文骥, 等. 不锈钢-碳钢层合板激光弯折区增厚现象研究[J]. 中国激光, 2014, 41(8): 0803001.

    Ma Xupeng, Wang Xuyue, Xu Wenji, et al.. Study on thickening of laser bending zone for stainless steel-carbon steel laminated sheet[J]. Chinese J Lasers, 2014, 41(8): 0803001.

[8] Carey C, Cantwell W J, Dearden G, et al.. Towards a rapid, non-contact shaping method for fiber metal laminates using a laser source[J]. International Journal of Advanced Manufacturing Technology, 2010, 47(5): 557-565.

[9] 曹晓莲, 徐培全, 曹卓玥, 等. YG20/45#钢激光焊焊缝组织与界面元素扩散研究[J]. 中国激光, 2014, 42(3): 0303006.

    Cao Xiaolian, Xu Peiquan, Cao Zhuoyue, et al.. Research on micro-structure and element diffusion in YG20/45# steel laser welds[J]. Chinese J Lasers, 2014, 42(3): 0303006.

[10] Edwardson S P, French P, Dearden G, et al.. Laser forming of fiber metal laminate[J]. Laser in Engineering, 2005, 15: 233-255.

[11] Shen H, Yao Z Q, Hu J. Numerical analysis of metal/ceramic bilayer materials systems in laser forming[J]. Computational Materials Science, 2009, 45(2): 439-442.

[12] 赵琳, 塚本进, 荒金吾郎, 等. 激光-电弧复合焊焊缝合金元素分布的研究[J]. 中国激光, 2015, 42(4): 0406006.

    Zhao Lin, Tsukamoto Susumu, Arakane Goro, et al.. Distribution of wire feeding elements in laser-arc hybrid welds[J]. Chinese J Lasers, 2015, 42(4): 0406006.

[13] 杨家斌, 张丽坤. 钢铁材料手册[M]. 北京: 中国标准出版社, 2007: 75-77, 141-148.

    Yang Jiabin, Zhang Likun. Handbook of steel and iron material[M]. Beijing: Chinese Metrology Press, 2007: 75-77, 141-148.

[14] 武佳琪. 镁/钛异种金属爆炸焊接界面微观组织及性能的研究[D]. 太原: 太原理工大学, 2015: 19-23.

    Wu Jiaqi. Study on the interface micro-structure and mechanical properties for the Mg/Ti composite[D]. Taiyuan: Taiyuan University of Technology, 2015: 19-23.

[15] 黄继华. 金属及合金中的扩散[M]. 北京: 冶金工业出版社, 1996: 1-3.

    Huang Jihua. The diffusion in metals and alloys[M]. Beijing: Metallurgical Industry Press, 1996: 1-3.

[16] 李慧. Ni-Cr-Fe合金中晶界偏聚与晶界析出的研究[D]. 上海: 上海大学, 2011: 66-97.

    Li Hui. Study of grain boundary segregation and precipitation in Ni-Cr-Fe alloys[D]. Shanghai: Shanghai University, 2011: 66-97.

[17] 陈力. 不锈钢/低合金钢焊接接头微观组织及力学性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2011: 1-3.

    Chen Li. Study on microstructure and mechanical property in welded joint of stainless steel/low alloy steel[D]. Harbin: Harbin Institute of Technology, 2011: 1-3.

[18] 王印培. 钢的硬度值与屈服强度之间的经验关系式[J]. 化工与通用机械, 1982(12): 59-61.