[1] Zhang K, Chen J Q, Ma P Z, et al. Effect of welding thermal cycle on microstructural evolution of Al-Zn-Mg-Cu alloy[J]. Materials Science and Engineering A, 2018, 717: 85-94.

[2] Qiao J N, Lu J X, Wu S K. Fatigue cracking characteristics of fiber laser-VPTIG hybrid butt welded 7N01P-T4 aluminum alloy[J]. International Journal of Fatigue, 2017, 98: 32-40.

[3] Dursun T, Soutis C. Recent developments in advanced aircraft aluminium alloys[J]. Materials & Design, 2014, 56: 862-871.

[4] Wang Q Z, Zhao Y, Yan K, et al. Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding[J]. Materials & Design, 2015, 68(5): 97-103.

[5] Zhang C, Gao M, Zeng X Y. Effect of microstructural characteristics on high cycle fatigue properties of laser-arc hybrid welded AA6082 aluminum alloy[J]. Journal of Materials Processing Technology, 2016, 231: 479-487.

[6] 王启明, 乔俊楠, 邹江林, 等. A7N01铝合金光纤激光-变极性TIG复合填丝焊接工艺研究[J]. 中国激光, 2016, 43(6): 0602004.

    Wang Q M, Qiao J N, Zou J L, et al. Fiber laser-variable polarity TIG hybrid welding of A7N01 aluminum alloy with filler wire[J]. Chinese Journal of Lasers, 2016, 43(6): 0602004.

[7] 王灿, 吕俊霞, 张建超, 等. 填充焊丝对A7204铝合金光纤激光-VPTIG复合焊接头的影响[J]. 中国激光, 2018, 45(3): 0302002.

    Wang C, Lü J X, Zhang J C, et al. Effects of filler wires on A7204 aluminum alloy joint by fiber laser-VPTIG hybrid welding[J]. Chinese Journal of Lasers, 2018, 45(3): 0302002.

[8] 聂祚仁, 文胜平, 黄晖, 等. 铒微合金化铝合金的研究进展[J]. 中国有色金属学报, 2011, 21(10): 2361-2370.

    Nie Z R, Wen S P, Huang H, et al. Research progress of Er-containing aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(10): 2361-2370.

[9] Knipling K E, Dunand D C, Seidman D N. Criteria for developing castable, creep-resistant aluminum-based alloys: a review[J]. Zeitschrift Fur Metallkunde, 2006, 97(3): 246-265.

[10] Yang D X, Li X Y, He D Y, et al. Effect of minor Er and Zr on microstructure and mechanical properties of Al-Mg-Mn alloy (5083) welded joints[J]. Materials Science and Engineering A, 2013, 561: 226-231.

[11] 邹亮, 潘清林, 何运斌, 等. 微量钪对超高强Al-Zn-Cu-Mg-Zr合金组织与性能的影响[J]. 中国稀土学报, 2007, 25(4): 448-453.

    Zou L, Pan Q L, He Y B, et al. Effect of minor scandium addition on microstructures and tensile properties of super-high strength Al-Zn-Cu-Mg-Zr alloys[J]. Journal of the Chinese Rare Earth Society, 2007, 25(4): 448-453.

[12] Huang X, Pan Q L, Li B, et al. Effect of minor Sc on microstructure and mechanical properties of Al-Zn-Mg-Zr alloy metal-inert gas welds[J]. Journal of Alloys and Compounds, 2015, 629: 197-207.

[13] Erdeniz D, de Luca A, Seidman D N, et al. Effects of Nb and Ta additions on the strength and coarsening resistance of precipitation-strengthened Al-Zr-Sc-Er-Si alloys[J]. Materials Characterization, 2018, 141: 260-266.

[14] Wang F, Liu Z L, Qiu D, et al. Revisiting the role of peritectics in grain refinement of Al alloys[J]. Acta Materialia, 2013, 61(1): 360-370.

[15] Gutierrez A, Lippold J C. A proposed mechanism for equiaxed grain formation along the fusion boundary in aluminum-copper-lithium alloys[J]. Welding Journal, 1998, 77(6): 23-132.

[16] 孔晓芳, 李飞, 吕俊霞, 等. 5083铝合金光纤激光填丝焊接工艺[J]. 中国激光, 2014, 41(10): 1003007.

    Kong X F, Li F, Lü J X, et al. Fiber laser welding of 5083 aluminum alloy with filler wire[J]. Chinese Journal of Lasers, 2014, 41(10): 1003007.

[17] Katayama S. Solidification phenomena of weld metals (1st report): characteristic solidification morphologies, microstructures and solidification theory[J]. Welding International, 2000, 14(12): 939-951.

[18] Hu Y N, Wu S C, Chen L. Review on failure behaviors of fusion welded high-strength Al alloys due to fine equiaxed zone[J]. Engineering Fracture Mechanics, 2019, 208: 45-71.

[19] Zhang X X, Zhou X R, Hashimoto T, et al. Corrosion behaviour of 2A97-T6 Al-Cu-Li alloy: the influence of non-uniform precipitation[J]. Corrosion Science, 2018, 132: 1-8.

[20] Zhang L, Li X Y, Nie Z R, et al. Comparison of microstructure and mechanical properties of TIG and laser welding joints of a new Al-Zn-Mg-Cu alloy[J]. Materials & Design, 2016, 92: 880-887.

[21] Wu S C, Hu Y N, Song X P, et al. On the microstructural and mechanical characterization of hybrid laser-welded Al-Zn-Mg-Cu alloys[J]. Journal of Materials Engineering and Performance, 2015, 24(4): 1540-1550.

[22] Lathabai S, Lloyd P G. The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy[J]. Acta Materialia, 2002, 50(17): 4275-4292.

[23] 胡雅楠, 吴圣川, 宋哲, 等. 激光复合焊接7020铝合金的疲劳性能及损伤行为[J]. 中国激光, 2018, 45(3): 0302003.

    Hu Y N, Wu S C, Song Z, et al. Fatigue property and fracture behavior of 7020 aluminum alloys welded by laser-MIG hybrid welding[J]. Chinese Journal of Lasers, 2018, 45(3): 0302003.

[24] Zhang Y, Milkereit B, Kessler O, et al. Development of continuous cooling precipitation diagrams for aluminium alloys AA7150 and AA7020[J]. Journal of Alloys and Compounds, 2014, 584(25): 581-589.

[25] Zhang L, Li X Y, Nie Z R, et al. Microstructure and mechanical properties of a new Al-Zn-Mg-Cu alloy joints welded by laser beam[J]. Materials & Design, 2015, 83: 451-458.

[26] 吴东江, 房振安, 吴冬冬, 等. 铌粉添加量对铝合金激光-电弧复合焊接气孔率的影响[J]. 焊接技术, 2016, 45(8): 10-13.

    Wu D J, Fang Z A, Wu D D, et al. Effect of niobium powder addition on porosity of aluminum alloy laser-arc hybrid welding[J]. Welding Technology, 2016, 45(8): 10-13.