安装误差对直齿标准齿轮螺旋线偏差的影响规律
凌四营, 李军, 于佃清, 王坤, 王晓东, 王立鼎. 安装误差对直齿标准齿轮螺旋线偏差的影响规律[J]. 光学 精密工程, 2017, 25(9): 2367.
LING Si-ying, LI Jun, YU Dian-qing, WANG Kun, WANG Xiao-dong, WANG Li-ding. Influence law of installation errors on helix deviation of spur gear artifact[J]. Optics and Precision Engineering, 2017, 25(9): 2367.
[1] 石照耀, 王声堂. 齿轮行业将迎来第四次机遇[N]. 中国工业报, 2017-02-21.(第006版).
SHI ZH Y, WNG SH T.Gear industry will meet the fourth opportunity [N]. China Industry News, 2017-02-21.(006)(in Chinese)
[2] JJG-1008-2006, 标准齿轮[S].
JJG-1008-2006, Master Gears [S].(in Chinese)
[3] GB/T 10095.1-2008, 圆柱齿轮精度制—第1部分: 轮齿同侧齿面的检验[S].
GB/T 10095.1-2008, cylindrical gears-system of accuracy-Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth [S].(in Chinese)
[4] ISO1328-1: 2013, Cylindrical gears-ISO system of flank tolerance classification-Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth. [S].
[5] 王立鼎, 凌四营, 马勇, 等. 精密、超精密齿轮的加工方法[J]. 光学 精密工程, 2009, 17(2): 321-325.
[6] 凌四营, 王立鼎, 李克洪, 等. 基于1级精度基准标准齿轮的超精密加工工艺[J]. 光学 精密工程, 2011, 19(7): 1596-1604.
[7] LOU Z F, LING S Y, HE H Z, et al.. A kind of multi-step method for measuring pitch deviation of gear [J]. Measurement Science and Technology, 2012, 23(11): 115002.
[8] LING S Y, LOU Z F, WANG L D, et al.. Optimal forming principle and grinding experiment of the ultra-precision involute profile [J]. J. Engineering Manufacture, 2013, 227(B3): 375-382.
[9] LING S Y, ZHANG B, ZHANG J, et al.. Two gear-grinding techniques to improve pitch deviations of ultra-precision gears [J]. J. Engineering Manufacture, 2015, 229(11): 1955-1962.
[10] LING S Y, LOU Z F, LIU Q, et al.. The periodical translocation gear-grinding technique to improve the indexing accuracy of ultra-precision gears [J]. Advanced Materials Research, 2014, 941-944: 2134-2139.
[11] LOU Z F, HE H Z, GUO B Y, et al.. Two-step method for measuring gear pitch deviation [C]. 8th International Symposium on Precision Engineering Measurements and Instrument(ISPEM), 2012, Aug. 08-11.
[12] GOCH G. GearMetrology [J]. CIRP Annals-Manufacturing Technology, 2003, 52(2): 659-695.
[13] 林虎, 石照耀, 薛梓, 等. 基于正交距离回归齿面的齿轮误差评定[J]. 光学 精密工程, 2015, 23(11): 3192-3199.
[14] HARTIG F, LIN H, KNIEL K, et al.. Standard conforming involute gear metrology using an articulated arm coordinate measuring system [J]. Measurement Science & Technology, 2012, 23(10): 105011.
[15] 石照耀, 费业泰, 谢华锟. 齿轮测量技术100年——回顾与展望[J]. 中国工程科学, 2003, 5(9): 13-17.
SHI ZH Y, FEI Y T, XIE H K. 100 years of gear measurement technology-review &prospect [J]. Engineering Science, 2003, 5(9): 13-17.(in Chinese)
[16] 宋远, 叶寒, 涂海宁. 运动误差对齿轮螺旋线偏差测量的影响[J]. 机械设计与制造, 2013(7): 129-130+133.
SONG Y, YE H, TU H N. The influence about motion error on gear helix deviation measurement [J]. Mechanical Design and Manufacturing, 2013(7): 129-130+133.(in Chinese)
[17] LOTZE W, HAERTIG F. 3D gear measurement by CMM [C]. 5th International Conference and Exhibition on Laser Metrology, CMM and Machine Tool Performance(LANDAMAP 2001).
[18] GAO C H, CHENG K, WEBB D. Investigation on sampling size optimization in gear tooth surface measurement using a CMM [J]. The International Journal of Advanced Manufacturing Technology, 2004, 24(7): 599-606.
凌四营, 李军, 于佃清, 王坤, 王晓东, 王立鼎. 安装误差对直齿标准齿轮螺旋线偏差的影响规律[J]. 光学 精密工程, 2017, 25(9): 2367. LING Si-ying, LI Jun, YU Dian-qing, WANG Kun, WANG Xiao-dong, WANG Li-ding. Influence law of installation errors on helix deviation of spur gear artifact[J]. Optics and Precision Engineering, 2017, 25(9): 2367.