[1] 吴先前, 黄晨光, 宋宏伟. 激光冲击强化诱导的残余应力影响因素分析［J］. 中国激光, 2010, 37(10): 2632～2637

    Wu Xianqian, Huang Chenguang, Song Hongwei. Parameters analysis of residual stress induced by laser shock processing［J］. Chinese J. Lasers, 2010, 37(10): 2632～2637

[2] 任旭东, 张田, 张永康 等. 激光冲击处理提高00Cr12合金的疲劳性能［J］. 中国激光, 2010, 37(8): 2111～2115

    Ren Xudong, Zhang Tian, Zhang Yongkang et al.. Improving fatigue properties of 00Cr12 alloy by laser shock processing［J］. Chinese J. Lasers, 2010, 37(8): 2111～2115

[3] H. Zhang, C. Y. Yu. Laser shock processing of 2024-T62 aluminum alloy[J]. Materials Science and Engineering A, 1998, 257(2): 322～327

[4] 马壮, 李应红, 张永康 等. 激光冲击处理对304不锈钢力学性能的影响［J］. 材料热处理学报, 2007, 28(3): 102～105

    Ma Zhuang, Li Yinghong, Zhang Yongkang et al.. Influence of laser shock processing on mechanical property of SUS304 steel［J］. Transactions of Materials and Heat Treatment, 2007, 28(3): 102～105

[5] 花银群, 陈瑞芳, 路淼 等. 激光冲击强化处理40Cr钢的实验研究［J］. 中国激光, 2004, 31(4): 495～498

    Hua Yinqun, Chen Ruifang, Lu Miao et al.. Study on the experiment of 40Cr steel by laser shock processing［J］. Chinese J. Lasers, 2004, 31(4): 495～498

[6] 张永康, 裴旭, 陈菊芳 等. 脉冲激光冲击镁合金表面产生周期性波纹结构的现象及分析［J］. 光学学报, 2010, 30(9): 2613～2619

    Zhang Yongkang, Pei Xu, Chen Jufang et al.. Phenomenon and analysis of periodic ripple structure on magnesium alloy surface induced by laser shock processing［J］. Acta Optica Sinica, 2010, 30(9): 2613～2619

[7] J. Z. Lu, K. Y. Luo, Y. K. Zhang et al.. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts［J］. Acta Materialia, 2010, 58(11): 3984～3994

[8] 任旭东, 张永康, 周建忠 等. 激光冲击工艺对钛合金疲劳寿命的影响［J］. 中国有色金属学报, 2007, 17(9): 1486～1489

    Ren Xudong, Zhang Yongkang, Zhou Jianzhong et al.. Influence of laser-shock processing on fatigue life of titanium alloy［J］. The Chinese Journal of Nonferrous Metals, 2007, 17(9): 1486～1489

[9] J. Cai, S. Shekhar, J. Wang et al.. Nanotwinned microstructures from low stacking fault energy brass by high-rate severe plastic deformation［J］. Scripta Materialia, 2009, 60(8): 599～602

[10] C. S. Montross, T. Wei, L. Ye et al.. Laser shock processing and its effects on microstructure and properties of metal alloys: a review［J］. International Journal of Fatigue, 2002, 24(10): 1021～1036

[11] 王华明, 李晓轩, 孙锡军 等. 激光冲击处理不锈钢及镍基合金后表面力学性能的研究［J］. 中国激光, 2000, A27(8): 756～760

    Wang Huaming, Li Xiaoxuan, Sun Xijun et al.. Study of the surface mechanical properties of laser shock processed austenitic steel and Ni-based superalloy［J］. Chinese J. Lasers, 2000, A27(8): 756～760

[12] Y. K. Zhang, J. Z. Lu, X. D. Ren et al.. Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engine blades manufacture by LY2 aluminum alloy［J］. Materials and Design, 2009, 30(5): 1697～1703

[13] 张洁, 顾祥, 祝乐 等. 激光冲击强化7050铝合金疲劳寿命的数值模拟［J］. 中国激光, 2010, 37(12): 3192～3195

    Zhang Jie, Gu Xiang, Zhu Le et al.. Numerical simulation of fatigue life of 7050 aluminum alloy processed by laser shock processing［J］. Chinese J. Lasers, 2010, 37(12): 3192～3195

[14] K. Y. Luo, J. Z. Lu, L. Y. Zhang et al.. The microstructural mechanism for mechanical property of LY2 aluminum alloy after laser shock processing［J］. Materials and Design, 2010, 31(5): 2599～2603

[15] K. Y. Luo, J. Z. Lu, L. Y. Zhang et al.. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel［J］. Materials Science and Engineering A, 2011, 528(13-14): 4783～4788

[16] J. Z. Lu, K. Y. Luo, Y. K. Zhang et al.. Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel［J］. Acta Materialia, 2010, 58(16): 5354～5362

[17] 许海鹰, 邹世坤, 车志刚 等. 激光冲击次数对TC4氩弧焊焊缝微结构及性能的影响［J］. 中国激光, 2011, 38(3): 0303002

    Xu Haiying, Zou Shikun, Che Zhigang et al.. Influence of laser shock processing times on TC4 argon arc welding joint microstructure and properties［J］. Chinese J. Lasers, 2011, 38(3): 1～5

[18] D. K. Cohen, B. Little, F. S. Luecke et al.. Techniques for measuring 1 μm diameter Gaussian beams［J］. Appl. Opt., 1984, 23(4): 637～640

[19] Z. Q. Lv, P. Jiang, Z. H. Wang et al.. XRD analyses on dissolution behavior of cementite in eutectoid pearlitic steel during cold rolling［J］. Mater. Lett., 2008, 62(17-18): 2825～2827

[20] 孙淑华, 熊毅, 傅万堂 等. 共析珠光体钢在冷轧过程中的组织变化［J］. 金属学报, 2005, 41(3): 267～270

    Sun Shuhua, Xiong Yi, Fu Wantang et al.. Microstructure chances of eutectoid pearlitic steel during cold rolling［J］. Acta Metallurgica Sinica, 2005, 41(3): 267～270

[21] Fu Wantang, Xiong Yi, Zhao Jun et al.. Microstructure evolution of pearlite during severe cold rolling in eutectoid Fe-C alloys［J］. Journal of Materials Science and Technology, 2005, 21(1): 25～27

[22] X. Scherpereel, P. Peyre, R. Fabbro et al.. Modifications of mechanical and electrochemical properties of stainless steels surfaces by laser shock processing［J］. Laser in Material Processing, 1997, 3097: 546～557

[23] P. Peyre, R. Fabbro. Laser shock processing: a review of the physics and applications［J］. Opt. & Quant. Electronics, 1995, 27(12): 1213～1229

[24] 熊毅, 贺甜甜, 张凌峰 等. 共析珠光体钢激光冲击处理后的组织演变［J］. 材料热处理学报, 2010, 31(11): 47～50

    Xiong Yi, He Tiantian, Zhang Lingfeng et al.. Microstructure evolution of eutectoid pearlitic steel after laser shock processing［J］. Transactions of Materials and Heat Treatment, 2010, 31(11): 47～50