[1] L. Xue, M. U. Islam, G. McGregor. Dot matrix hardening of steels using a fiber optic coupled pulsed NdYAG laser［J］. Materials and Manufacturing Processes, 1999, 14(1): 53～65

[2] B. S. Yilbas, M. Khaled, M. A. Gondal et al.. Nano-second pulse laser treatment of Incoloy 800HT alloy-corrosion properties［J］. Optics and Lasers in Engineering, 1999, 32(2): 157～172

[3] 钟如涛, 熊征. 连续/脉冲CO2激光熔覆高温合金K403［J］. 中国激光, 2010, 37(3): 852～857

    Zhong Rutao, Xiong Zheng. Research on continuous/pulse laser cladding superalloy K403［J］. Chinese J. Lasers, 2010, 37(3): 852～857

[4] S. P. Gadag, M. N. Srinivasan. Dry sliding wear and friction: laser-treated ductile iron［J］. Wear, 1994, 173(1-2): 21～29

[5] S. I. Yares′ko. The influence of the composition of cobalt phase of hard alloys on tool wear upon laser hardening［J］. Russian Journal of Non-Ferrous Metals, 2009, 50(5): 556～562

[6] J. KUSISKI. Microstructure, chemical composition and properties of the surface layer of M2 steel after laser melting under different conditions［J］. Applied Surface Science, 1995, 86(1-4): 317～322

[7] U. Kamachi Mudali, M. G. Pujar, R. K. Dayal. Effects of laser surface melting on the pitting resistance of sensitized nitrogen-bearing type 316 L stainless steel［J］. Materials Engineering and Performance, 1996, 5(1): 124～128

[8] 黄开金, 林鑫, 谢长生. 薄板012Al模具钢脉冲NdYAG激光熔凝的研究［J］. 中国机械工程, 2006, 17(S1): 327～330

    Huang Kaijin, Lin Xin, Xie Changsheng. Study of thin plate 012Al die steel during pulsed NdYAG laser melting［J］. China Mechanical Engineering, 2006, 17(S1): 327～330

[9] 占剑, 杨明江, 王红才. 脉冲YAG激光波形对缸套内壁激光刻蚀微坑形貌的影响［J］. 中国激光, 2011, 38(6): 0603032

    Zhan Jian, Yang Mingjiang, Wang Hongcai. Effect of YAG laser pulse waveform to laser etching crater morphology on cylinder wall［J］. Chinese J. Lasers, 2011, 38(6): 0603032

[10] 李美艳, 王勇, 韩彬 等. 激光熔凝处理高铬钢的高温磨损性能［J］. 中国激光, 2010, 37(1): 302～306

    Li Meiyan, Wang Yong, Han Bin et al.. High-temperature wear property of high chrome steel by laser surface melting［J］. Chinese J. Lasers, 2010, 37(1): 302～306

[11] Shen Lian, Li Chenglao. Effect of laser melting processing on the microstructure and wear resistance of gray cast iron［J］. Wear, 1991, 147(1): 195～206

[12] Peter J. Blau. Mechanisms for transitional friction and wear behavior of sliding metals［J］. Wear, 1981, 72(1): 55～66

[13] 王爱琴, 谢敬佩, 王文焱 等. 表面感应淬火对45钢滚动磨损特性的影响［J］. 材料热处理学报, 2007, 28(1): 127～129

    Wang Aiqin, Xie Jingpei, Wang Wenyan et al.. Effect of induction hardening on rolling wear properties of 45 steel［J］. Transactions of Materials and Heat Treatment, 2007, 28(1): 127～129

[14] R. Colaco, R. Vilar. On the influence of retained austenite in the abrasive wear behaviour of a laser surface melted tool steel［J］. Wear, 2005, 258(1-4): 225～231

[15] 张庆茂, 刘文今. 激光熔凝层组织与摩擦学特性的研究［J］. 强激光与粒子束, 2006, 18(3): 389～392

    Zhang Qingmao, Liu Wenjin. Investigation on microstructures and tribological characteristic of laser remelting layers［J］. High Power Laser and Particle Beams, 2006, 18(3): 389～392

[16] 孙浩, 凌刚, 李洪文 等. 扫描间距对45钢激光熔凝强化组织性能的影响［J］. 农业工程学报, 2011, 27(2): 156～160

    Sun Hao, Ling Gang, Li Hongwen et al.. Influence of scanning interval on microstructure and abrasive wear resistance of 45 steel by laser melting［J］. Transactions of the Chinese Society of Agricultural Engineering, 2011, 27(2): 156～160

[17] K. L. Johnson. 接触力学［M］. 徐秉业, 罗学富, 刘倍声, 译. 北京: 高等教育出版社, 1992. 56～59

    K. L. Johnson. Contact Mechanics［M］. Xu Bingye, Luo Xuefu, Liu Beisheng. Transl.. Beijing: Higher Education Press, 1992. 56～59