[1] Macllwain C. Laser project faces optics hurdle[J]. Nature, 1990, 401(6750): 201-202.

[2] Palmier S, Tovena I, Courchinoux R, et al. Laser damage to optical components induced by surface chromium particles[C]//Proc of SPIE. 2005, 5647: 156-164.

[3] Guehenneux G, Bouchut P, Veillerot M, et al. Impact of outgassing organic contamination on laser-induced damage threshold of optics effect of laser conditioning[C]//Proc of SPIE. 2005: 59910F.

[4] Honig J. Cleanliness improvements of National Ignition Facility amplifiers as compared to previous large-scale lasers[J]. Opt Eng, 2004, 43(12): 2904-2911.

[5] 余颖, 赵峰, 李文博, 等.高功率激光装置中的气载分子污染物测量和分析[J].强激光与粒子束, 2009, 21(8): 1153-1156.(Yu Ying, Zhao Feng, Li Wenbo, et al. Measurement and analysis of airborne molecular contaminations in high power laser facility. High Power Laser and Particle Beams, 2009, 21(8): 1153-1156)

[6] 於海武, 郑万国, 唐军, 等.高功率激光器放大器片腔洁净度实验研究[J].强激光与粒子束, 2001, 13(3): 272-276.(Yu Haiwu, Zheng Wanguo, Tang Jun, et al. Investigation of slab cavity cleanliness of high power laser amplifiers. High Power Laser and Particle Beams, 2001, 13(3): 272-276)

[7] 苗心向, 程晓锋, 袁晓东, 等.熔石英表面铜颗粒污染激光诱导损伤[J].强激光与粒子束, 2010, 22(8): 1740-1744.(Miao Xinxiang, Cheng Xiaofeng, Yuan Xiaodong, et al. Laser-induced damage of fused silica initiated by Cu contamination particles on surface. High Power Laser and Particle Beams, 2010, 22(8): 1740-1744)

[8] GB/T 16601-1996.光学表面激光损伤阈值测试方法[S]. 1997.(GB/T 16601-1996. Test methods for laser induced damages threshold of optical surfaces. 1997)

[9] Palmier S, Garcia S, Rullier J L. Method to characterize superficial particulate pollution and to evaluate its impact on optical components under a high power laser[J]. Optical Engineering, 2008, 47: 084203.

[10] 赵龙彪, 秦朗, 周国瑞, 等.大口径高通量实验平台反射镜在线洁净控制技术[J].强激光与粒子束, 2013, 25(18): 3215-3219.(Zhao Longbiao, Qin Lang, Zhou Guorui, et al. Method of online cleanliness control for upward-facing transport mirrors in integration test bed. High Power Laser and Particle Beams, 2013, 25(18): 3215-3219)

[11] Bien-Aime K, Pereira A, Belin C, et al. Impact of outgassing organic contamination on laser induced damage of optics[C]//Proc of SPIE. 2009: 75040V.

[12] Guo Yuanjun, Zu Xiaotao, Jiang Xiaodong, et al. Experimental research of laser-induced damage of the monolayer ZrO2 PVD and sol-gel films[J]. Opt Laser Technol, 2008, 40(5): 677-681.

[13] Pareek R, Kumbhare M N. Effect of oil vapor contamination on the performance of porous silica sol-gel antireflection-coated optics in vacuum spatial filters of high-power neodymium glass laser[J]. Optical Engineering, 2008, 47: 023801.

[14] Palmier S, Garcia S, Lamaignere L, et al. Surface particulate contamination of the LIL optical components and their evolution under laser irradiation[C]//Proc of SPIE. 2007: 64030V.

[15] 程晓锋, 苗心向, 陈远斌, 等.神光-Ⅲ主机激光装置片状放大器洁净控制进展[J].强激光与粒子束, 2012, 24(1): 1-2.(Cheng Xiaofeng, Miao Xinxiang, Chen Yuanbin, et al. Development on cleanliness control of slab amplifiers for Shenguang-Ⅲ laser driver. High Power Laser and Particle Beams, 2012, 24(1): 1-2)

[16] Lu Y F, Zhen Y W, Song W D. Charcaterization of ejected particles during laser cleaning[J]. Journal of Applied Physics, 2000, 8(1): 549-552.

[17] Sommer S C , Stowers I F, Van Doren D E, et al. Clean construction protocol for the National Ignition Facility beampath and utilities[R]. UCRL-JC-145251, 2002.

[18] 程晓锋, 王洪彬, 苗心向, 等.高功率固体激光驱动器污染控制及片状放大器洁净度改进[J].强激光与粒子束, 2013, 25(5): 1147-1151.(Cheng Xiaofeng, Wang Hongbin, Miao Xinxiang, et al. Contamination control for high-power solid-state laser drive and improvement of cleanliness in slab amplifiers. High Power Laser and Particle Beams, 2013, 25(5): 1147-1151)