[1] K. O. Hill, Y. Fujii, D. C. Johnson, and B. S. Kawasaki, “Photosensitivity in optical fiber waveguides: Application to reflection fiber fabrication,” Appl. Phys. Lett., vol. 32, no. 10, pp. 647-649, 1978.

[2] J. Jung, H. Nam, B. Lee, J. O. Byun, and N. S. Kim, “Fiber Bragg grating temperature sensor with controllable sensitivity,” Appl. Opt., vol. 38, no. 13, pp. 2752-2754, 1999.

[3] Z. C. Zhuo and B. S. Ham, “A temperature-insentive strain sensor using a fiber Bragg grating,” Opt. Fiber Technol., vol. 15, no. 5-6, pp. 442-444, 2009.

[4] P. K. C. Chan, W. Jin, K. T. Lau, L. M. Zhou, and M. S. Demokan, “Multi-point strain measurement of composite-bonded concrete materials with a RF-band FMCW multiplexed FBG sensor array,” Sens. Actuators A: Phys., vol. 87, no. 1-2, pp. 19-25, 2000.

[5] H. Ahmad, W. Y. Chong, K. Thambiratnam, M. Z. Zulklifi, P. Poopalan, M. M. M. Thant, and S. W. Harun, “High sensitivity fiber Bragg grating pressure sensor using thin metal diaphragm,” IEEE Sens. J., vol. 9. no. 12, pp. 1654-1659, 2009.

[6] X. Zeng and Y. Rao, “Simultaneous static strain, temperature and vibration measurement using an integrated FBG/EFPI sensor,” Chin. Phys. Lett., vol. 18, no. 12, pp. 1617-1619, 2001.

[7] G. Meltz, W. W. Morey, and W. H. Glenn, “In-fibre Bragg grating tap,” presented at Optical fiber Communication Conference, OFC’90, San Francisco, CA, 1990.

[8] M. C. P. Huy, G. Laffont, V. Dewynter, P. Ferdinand, L. Labonte, D. Pagnoux, P. Roy, W. Blanc, and B. Dussardier, “Tilted fiber Bragg grating photowritten in microstructured optical fiber for improved refractive index measurement,” Opt. Express, vol. 14, no. 22, pp. 10359-10370, 2006.

[9] L. Brilland, D. Pureur, J. F. Bayron, and E. Delevaque, “Slanted gratings UV-written in photosensitive cladding fibre,” Electron. Lett., vol. 35, no. 3, pp. 234-236, 1999.

[10] J. M. Battiato and R. K. Kostuk, “45°slanted fibre Bragg grating design with prism coupled holographic exposure,” Electron. Lett., vol. 38, no. 22, pp. 1323-1324, 2002.

[11] P. S. Westbrook, T. A. Strasser, and T. Erdogan, “In-line polarimeter using blazed fiber gratings,” IEEE Photon. Technol. Lett., vol. 12, no. 10, pp. 1352-1354, 2000.

[12] T. Ergodan and J. E. Sipe, “Tilted fiber phase gratings,” J. Opt. Soc. Am. A, vol. 13, no. 2, pp. 296-313, 1996.

[13] A. Bouzid and M. A. G. Abushagur, “Scattering analysis of slanted fiber gratings,” Appl. Opt., vol. 36, no. 3, pp. 558-562, 1997.

[14] T. Erdogan, “Cladding-mode resonances in shortand long period fiber grating filters,” J. Opt. Soc. Am. A, vol. 14, no. 8, pp. 1760-1773, 1997.

[15] K. S. Lee and T. Erdogan, “Transmissive tilted gratings for LP01-to-LP11 mode coupling,” IEEE Photon. Technol. Lett., vol. 11, no. 10, pp.1286-1288, 1999.

[16] T. Erdogan and J. E. Sipe, “Radiation-mode coupling loss in tilted fiber phase gratings,” Opt. Lett., vol. 20,no. 18, pp.1838-1840, 1995.

[17] Y. Li, M. Froggatt and T. Erdogan, “Volume current method for analysis of tilted fiber gratings,” IEEE J. Lightwave Technol., vol. 19, no. 10, pp. 1580-1591, 2001.

[18] R. B. Walker, S. J. Mihailov, P. Lu, and D. Grobnic, “Shaping the radiation field of tilted fiber Bragg gratings,” J. Opt. Soc. Am. B, vol. 22, no. 5, pp. 962-975, 2005.

[19] C. Jáuregui and J. M. Lo’pez-Higuera, “Near-field theoretical model of radiation from a uniform-tilted fiber Bragg grating,” Microw. Opt. Technol Lett., vol. 37, no. 2, pp. 124-127, 2003.

[20] Y. Li and T. G. Brown, “Radiation modes and tilted fiber gratings,” J. Opt. Soc. Am. B, vol. 23, no. 8, pp. 1544-1555, 2006.

[21] R. Kashyap, R. Wyatt, and R. J. Campbell, “Wideband gain flattened erbium fiber amplifier using a photosensitive fiber blazed grating,” Electron. Lett., vol. 29, no. 2, pp. 154-156, 1993.

[22] R. Kashyap, R. Wyatt, and P. F. Mckee, “Wavelength flattened saturated erbium amplifier using multiple side-tip Bragg gratings,” Electron. Lett., vol. 29, no. 11, pp. 1025-1026, 1993.

[23] E. Kerrinckx, A. Hidayat, P. Niay, Y. Quiquempois, M. Douay, I. Riant, and C. D. Barros, “Suppression of discrete cladding mode resonances in fiber slanted Bragg gratings for gain equalisation,” Opt. Express, vol. 14, no. 4, pp. 1388-1394, 2006.

[24] C. W. Haggans, H. Singh, W. F. Varner, Y. Li, and M. Zippin, “Narrow-band rejection filters with negligible back reflection using tilted photoinduced gratings in single-mode fibers,” IEEE Photon. Technol. Lett., vol. 10, no. 5, pp. 690-692, 1998.

[25] Y. Liu, L. Zhang, and I. Bennion, “Fabricating fibre edge filters with arbitrary spectral response based on tilted chirped grating structures,” Meas. Sci. Technol., vol. 10, no. 1, pp. L1-L3, 1999.

[26] G. Nemova, J. Chauve, and R. Kashyap, “Design of sidetap fiber Bragg grating filters,” Opt. Commun., vol. 259, no. 2, pp. 649-654, 2006.

[27] R. S. Westbrook, K. S. Feder, P. I. Reyes, P. Steinvurzel, B. J. Eggleton, R. G. Ernst, L. A. Reith, and D. M. Gill, “Application of fibre Bragg grating filter/tap module to a wavelength-locked low-chirp directly-modulated 10 GB/s RZ transmitter,” presented at Optical Fiber Communication Conference, Anaheim, CA, March 17-22, 2002.

[28] H. S. Park, S. H. Yun, I. K. Hwang, S. B. Lee, and B. Y. Kim, “All-fibre add-drop wavelength-division multiplexer based on intermodal coupling,” IEEE Photon. Technol. Lett., vol. 13, no. 5, pp. 460-462, 2001.

[29] K. W. Gaff, F. Ladouceur, and J. D. Love, “Two-wavelength planar add/drop WDM filter employing a three-mode coupling Bragg grating,” Electron. Lett., vol. 36, no. 13, pp. 1142-1144, 2000.

[30] E. Marin, R. Ghosh, J. P. Meunier, X. Daxhelet, and S. Lacoix, “Bragg gratings in 2×2 symmetric fused fibre couplers: influence of the tilt on the wavelength response,” IEEE Photon. Technol. Lett., vol. 11, no. 11, pp. 1434-1436, 1999.

[31] K. Zhou, X. Chen, A. G. Simpson, L. Zhang, and I. Bennion, “High extinction ratio in-fiber polarizer based on 45°tilted fiber Bragg gratings,” Opt. Lett., vol. 30, no. 11, pp. 1285-1287, 2005.

[32] S. J. Mihailov, R. B. Walker, T. J. Stocki, and D. C. Johnson, “Fabrication of tilted fiber-grating polarisation-dependent loss equaliser,” Electron. Lett., vol. 37, no. 5, pp. 284-286, 2001.

[33] P. I. D. C. Reyes and P. S. Westbrook, “Tunable PDL of twisted-tilted fiber gratings,” IEEE Photon. Technol. Lett., vol. 15, no. 6, pp. 828-830, 2003.

[34] R. Suo, X. Chen, K. Zhou, L. Zhang, and I. Bennion, “In-fibre directional transverse loading sensor based on excessively tilted fibre Bragg gratings,” Meas. Sci. Technol., vol. 20, no. 3, pp. 034015, 2009.

[35] C. Caucheteur, S. Bette, C. Chen, M. Wuilpart, P. Megret, and J. Albert, “Tilted fiber Bragg grating refractometer using polarization-dependent loss measurement,” IEEE Photon. Technol. Lett., vol. 20, no. 24, pp. 2153-2155, 2008.

[36] C. Caucheteur, C. Chen, J. Albert, and P. Mégret, “Use of weakly tilted fiber Bragg gratings for sensing purpose,” presented at Optical Sensors 2008, Strasbourg, France, Apr. 7-10, 2008.

[37] C. Chen, C. Caucheteur, P. Mégret, and J. Albert, “The sensitivity characteristics of tilted fiber Bragg grating sensors with different cladding thickness,” Meas. Sci. Technol., vol. 18, no. 10, pp. 3117-3122, 2007.

[38] T. Guo, A. Ivanov, C. Chen, and J. Albert, “Temperature-independent tilted fiber grating vibration sensor based on cladding-core recoupling,” Opt. Lett., vol. 33, no. 9, pp. 1004-1006, 2008.

[39] C. Chen and J. Albert, “Strain-optic coefficients of individual cladding modes of single mode fiber: theory and experiment,” Electron. Lett., vol. 42, no. 18, pp. 1027-1028, 2006.

[40] S. Baek, Y. Jeong, and B. Lee, “Characteristics of short-period blazed fibre Bragg gratings for use as macro-bending sensors,” Appl. Opt., vol. 41, no. 4, pp. 631-636, 2002.

[41] C. Caucheteur, K. Chah, F. Lhommé, M. Blondel, and P. Mégret, “Simultaneous bend and temperature sensor using tilted FBG,” presented at 17th International Conference on Optical Fibre Sensors, Bruges, Belguim, May 23-27, 2005.

[42] G. Laffont and P. Ferdinand, “Sensitivity of slanted fibre Bragg gratings to external refractive index higher than that of silica,” Electron. Lett., vol. 7 no. 5, pp. 289-291, 2001.

[43] C. Zhao, X. Yang, M. S. Demokan, and W. Jin, “Simultaneous temperature and refractive index measurements using a 3°slanted multimode fiber Bragg grating,” IEEE J. Lightwave Technol., vol. 24, no. 2, pp. 879-883, 2006.

[44] K. Zhou, L. Zhang, X. Chen, and I. Bennion, “Optic sensors of high refractive-index responsivity and low thermal cross sensitivity that use fiber Bragg gratings of >80°tilted structures,” Opt. Lett., vol. 31, no. 9, pp. 1193-1195, 2006.

[45] C. Cauchedeur and P. Mégret, “Demodulation technique for weakly tilted fiber Bragg grating refractometer,” IEEE Photon. Technol. Lett., vol. 17, no. 12, pp. 2703-2705, 2005.

[46] X. Chen, K. Zhou, L. Zhang, and I. Bennion, “Optical chemsensor based on etched tilted Bragg grating structures in multimode fiber,” IEEE Photon. Technol. Lett., vol. 17, no. 4, pp. 864-866, 2005.

[47] C. Caucheteur, M. Wuilpart, C. Chen, P. Mégret, and J. Albert, “Quasi-distributed refractometer using tilted Bragg gratings and time domain reflectometry,” Opt. Express, vol. 16, no. 22, pp. 17882-17890, 2008.

[48] K. Zhou, A. G. Simpson, L. Zhang, and I. Bennion, “Side detection of strong radiation-mode out-coupling from blazed FBGs in single-mode and multimode fibers,” IEEE Photon. Technol. Lett., vol. 15, no. 7, pp. 936-938, 2003.

[49] K. Zhou, A. G. Simpson, X. Chen, L. Zhang, and I. Bennion, “Fiber Bragg grating sensor interrogation system using a CCD side detection method with superimposed blazed gratings,” IEEE Photon. Technol. Lett., vol. 16, no. 6, pp. 1549-1551, 2004.

[50] C. Jáuregui, A. Quintela, and J. M. López-Higuera, “Interrogation unit for fiber Bragg grating sensors that uses a slanted fiber grating,” Opt. Lett., vol. 29, no. 7, pp. 676-678, 2004.

[51] K. S. Feder, P. S. Westbrook, J. Ging P. I. Reyes, and G. E. Carver, “In-fiber spectrometer using tilted fibre gratings,” IEEE Photon. Technol. Lett., vol. 15, no. 7, pp. 933-935, 2003.

[52] C. Jáuregui, A. Quintela, and J. M. López-Higuera, “Interrogation unit for fiber Bragg grating sensors that uses a slanted fibre grating,” Opt. Lett., vol. 29, no. 7, pp. 676-678, 2004.

[53] M. C. P. Huy, G. Laffont, V. Dewynter, P. Ferdinand, L. Labonte, D. Pagnoux, P. Roy, W. Blanc, and B. Dussardier, “Tilted fiber Bragg grating photowritten in microstructured optical fiber for improved refractive index measurement,” Opt. Express, vol. 14, no. 22, pp. 10359-10370, 2006.

[54] E. Chechura, R. P. Murphy, S. W. James, and R. P. Tatam, “Tilted fibre Bragg gratings with nano-structured overlays,” presented at Optical Fiber Sensors, Cancún, Mexico, Oct. 23-27, 2006.

[55] S. Maguis, G. Laffont, P. Ferdinand, B. Carbonnier, K. Kham, T. Mekhalif, and M. C. Millot, “Biofunctionalized tilted fiber Bragg gratings for label-free immunosensing,” Opt. Express, vol. 16, no. 23, pp. 19049-19062, 2008.

[56] Y. Yanina, Y. Shevchenko, and J. Albert, “Plasmon resonances in gold-coated tilted fiber Bragg gratings,” Opt. Lett., vol. 32, no. 3, pp. 211-213, 2007.

[57] T. Allsop, R. Neal, S. Rehman, D. J. Webb, D. Mapps, and I. Bennion, “Characterization of infrared surface plasmon resonances generated from a fiber-optical sensor utilizing tilted Bragg gratings,” J. Opt. Soc. Am. B, vol. 25, no. 4, pp. 481-490, 2008.

[58] Y. Miao, B. Liu, and Q. Zhao, “Refractive index sensor based on measuring the transmission power of tilted fiber Bragg grating,” Opt. Fiber Technol., vol. 15, no. 3, pp. 223-236, 2009.

[59] Y. Miao, B. Liu, S. Tian, and Q. Zhao, “Temperature-insensitive refractive index sensor based on tilted fiber Bragg grating,” Microw. Opt. Technol. Lett., vol. 51, no. 2, pp. 479-483, 2009.

[60] Y. Miao, B. Liu, H. Zhang, Y. Li, H. Zhou, H. Sun, W. Zhang, and Q. Zhao, “Relative humidity sensor based on tilted Bragg grating with polyvinyl alcohol coating,” IEEE Photon. Technol. Lett., vol. 21, no. 7, pp. 441-443, 2009.

[61] Y. Miao, B. Liu, J. Liu, and Q. Zhao, “Bending and directional characteristics of weakly tilted fiber Bragg grating,” presented at 20th International Conference on Optical Fibre Sensors, Edinburgh, UK, Oct. 5-9, 2009.

[62] C. Chen, L. Xiong, A. Jafari, and J. Albert, “Differential sensitivity characteristics of tilted fiber Bragg grating sensors,” presented at Fiber Optic Sensor Technology and Applications IV, Boston, MA, Oct. 24-26, 2005.

[63] L. G. Goyal, R. I. Gallawa, and A. K. Ghatak, “Bent planar waveguides and whispering gallery modes: a new method of analysis,” J. Lightwave. Technol. Lett., vol. 8, no. 5, pp. 768-773, 1990.

[64] A. Kumar, R. L. Galawa, and I. G. Goyal, “Modal characteristics of bent dual mode planar optical waveguides,” J. Lightwave Technol., vol. 12, no. 4, pp. 621-624, 1994.

[65] U. L. Block, V. Dangui, M. J. F. Digonnet, and M. M. Fejer, “Origin of apparent resonances mode splitting in bent long-period fiber gratings,” J. Lightwave Technol., vol. 24, no. 2, pp. 1027-1034, 2006.

[66] B. Liu, Y. Miao, J. Liu, H. Sun, and H. Zhang, “Temperature-independent liquid level sensor based on tilted fiber Bragg grating,” presented at 2010 3rd Asia-Pacific Optical Fiber Sensors Conference, Guangzhou, China, Jun. 28-30, 2010.

[67] Y. Miao, B. Liu, and Q. Zhao, “Simultaneously measurement of strain and temperature using single tilted fibre Bragg grating,” Electron. Lett., vol. 44, no. 21, pp. 1242-1243, 2008.

[68] Y. Miao, B. Liu, Q. Zhao, S. Tian, and H. Sun, “Simultaneous measurement of bending-curvature and temperature using single tilted fiber Bragg grating,” Chin. J. Lasers, vol. 36, no. 9, pp. 2388-2392, 2009(in Chinese).

[69] Y. Miao, B. Liu, W. Zhang, and Q. Zhao, “Research on fiber sensor demodulation technique using tilted fiber Bragg gratings,” presented at Proceeding of SPIE, Hangzhou, China, Oct. 27-30, 2008.

[70] Y. Miao, B. Liu, W. Zhang, B. Dong, H. Zhou, and Q. Zhao, “Dynamic temperature compensating interrogation technique for strain sensors with tilted fiber Bragg gratings,” IEEE Photon. Technol. Lett., vol. 20, no. 16, pp. 1393-1395, 2008.