[1] S.A. Letts, E.M. Fearon, S.R. Buckley, M.D. Saculla, L.M. Allison, Fabrication of polymer shells using a depolymerizable mandrel, Fusion Technol. 28 (1995) 1797.

[2] B.W. Mcquillan, A. Nikroo, D.A. Steinman, F.H. Elsner, D.G. Czechowicz, The PAMS/GDP process for production of ICF target mandrel, Fusion Sci. Technol. 31 (1997) 381.

[3] A. Nikroo, J.M. Pontelandolfo, Fabrication of thin walled glow discharge polymer shells, Fusion Technol. 38 (2000) 58.

[4] B.W. Mcquillan, A. Greenwood, Microencapsulation process factors which influence the sphericity of 1 mm o.d. poly (a-methylstyrene) shells for ICF, Fusion Technol. 35 (1999) 194.

[5] M. Takagi, R. Cook, R. Stephens, J. Gibson, S. Paguio, Stiffening of PAMS mandrels during curing, Fusion Technol. 38 (2000) 50.

[6] S.F. Chen, L. Su, Y.Y. Liu, B. Li, X.B. Qi, et al., Density match during fabrication process of poly(a-methylstyrene) mandrels by microencapsulation, High Power Laser Part. Beam 24 (2012) 1561.

[7] K. Nagai, M. Nakajima, T. Norimatsu, Y. Izawa, T. Yamanaka, Solvent removal during curing process of highly spheric and monodispersedsized polystyrene capsules from density-matched emulsions composed of water and benzene/1,2-dichloroethane, J. Polym. Sci. Part A Polym. Chem. 38 (2000) 3412.

[8] M. Takagi, T. Norimatsu, T. Yamanaka, S. Nakai, Development of deuterated polystyrene shells for laser fusion by means of a densitymatched emulsion method, J. Vac. Sci. Technol. A 9 (1991) 2145.

[9] U. Kubo, H. Subakihara, Development of a coating technique for inertial confinement plastic targets, J. Vac. Sci. Technol. A 4 (1986) 1134.

[10] R.B. Stephens, B.M. McQuillan, W.J. Miller, Prospects for 2 mm diameter NIF polymer capsules, in: Fusion Engineering, 17th IEEE/ NPSS Symposium, vol. 2, 1997, p. 621.

[11] K. Kamogawa, N. Kuwayama, T. Katagiri, H. Akatsuka, T. Sakai, et al., Dispersion and stabilization in water of droplets of hydrophobic organic liquids with the addition of hydrophobic polymers, LANGMUIR 19 (2003) 4063.

[12] R.W. Wang, Y. Zhang, G.H. Ma, Z.G. Su, Preparation of uniform poly(- glycidylmethacrylate) porous microspheres by membrane emulsificationpolymerization technology, J. Appl. Polym. Sci. 102 (2006) 5018.

[13] M. Takagi, R. Cook, B. McQuillan, Development of high quality poly(amethylstyrene) mandrels for NIF, Nucl. Sci. Eng. 41 (2000) 278.

[14] M.F. Liu, S.F. Chen, X.B. Qi, B. Li, R.T. Shi, Improvement of wall thickness uniformity of thick-walled polystyrene shells by density matching, Chem. Eng. J. 241 (2014) 466.

[15] M. Takagi, T. Norimatsu, T. Yamanaka, S. Nakai, H. Ito, A novel technique to make foam shells with high sphericity and wall uniformity for cryogenic laser fusion targets, J. Vac. Sci. Technol. A 9 (1991) 820.

[16] S.F. Chen, Y.Y. Liu, S. Wei, L. Su, B. Li, Fabrication of millimeter-sized monodisperse poly(a-methylstyrene) capsules, High PowerLaser Part. Beam 24 (2012) 2647.

[17] B.W. McQuillan, F.H. Elsner, R.B. Stephens, L.C. Brown, The use of CaCl2 and other salts to improve surface finish and eliminate vacuoles in ICF microencapsulated shells, Fusion Technol. 35 (1999) 198.

[18] C. Lattaud, L. Guillot, C. Brachais, E. Fleury, O. Legaie, et al., Influence of a density mismatch on TMPTMA shells nonconcentricity, J. Appl. Polym. Sci. 124 (2012) 4882.

[19] M.F. Liu, R.T. Shi, S.F. Chen, Y.Y. Liu, L. Su, Batch characterization of ignition target mandrels, High Power Laser Part. Beam 25 (2013) 918.

[20] H. Huang, R.B. Stephens, D.W. Hill, C. Lyon, A. Nikroo, Automated batch characterization of ICF shells with vision-enable optical microscope system, Fusion Sci. Technol. 45 (2003) 214.

[21] M. Takagi, R. Cook, R. Stephens, J. Gibson, S. Paguio, Decreasing outof- round in poly(a-methylstyrene) mandrels by increasing interfacial tension, Fusion Technol. 38 (2000) 46.

[22] J.S. Vrentas, J.L. Duda, Molecular diffusion in polymer solutions, AICHE J. 25 (1979) 1.

[23] J. Selser, Dilute-solution hydrodynamic behavior of poly(a-methylstyrene) in a good solvent, Macromolecules 14 (1981) 346.