首页 > 论文 > 中国激光 > 47卷 > 9期(pp:902005--1)

长焦距绿光飞秒激光玻璃焊接

Long Focal Length Green Femtosecond Laser Welding of Glass

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

超快激光玻璃焊接通常采用大数值孔径显微物镜对激光束进行聚焦,焊接严格限制在极小的焦体积内,且工作距离短,焊接速度低,焊缝宽度窄,不利于工业应用。采用75 W绿光飞秒激光器和255 mm长焦距扫描振镜实现了显示屏玻璃的非光学接触高速焊接,获得了焦点位置、脉冲能量和扫描速度对焊缝成形的影响规律以及焊接工艺窗口,无缺陷焊接速度可高达6 m/min。焊缝的剪切强度可高达20 MPa,并具有良好的耐水性和高透过率,说明本焊接方法具有广阔的应用前景。

Abstract

In ultrafast laser glass welding, the laser beam is usually focused by a large numerical aperture micro objective lens. The welding is strictly limited to a very small focal volume with short working distance, low welding speed, and narrow weld width, which limit its industrial applications. In this work, a 75 W green femtosecond laser equipped with a 255 mm-long focal scanning galvanometer was employed to achieve non-optical contact high-speed welding of display screen glasses. The effects of the focal position, pulse energy, and scanning speed on the weld formation were obtained, the welding process window was also obtained. An extremely high welding speed of 6 m/min was achieved without weld defects. In addition, the welds exhibited a shear strength of 20 MPa as well as good seal performance and transmittance, indicating that our method has a great prospect in industrial applications.

广告组1 - 空间光调制器+DMD
补充资料

中图分类号:TN249

DOI:10.3788/CJL202047.0902005

所属栏目:激光制造

基金项目:国家重点研发计划;

收稿日期:2020-03-24

修改稿日期:2020-05-08

网络出版日期:2020-09-01

作者单位    点击查看

于淼:北京工业大学激光工程研究院高功率及超快激光先进制造实验室, 北京 100124
黄婷:北京工业大学激光工程研究院高功率及超快激光先进制造实验室, 北京 100124
肖荣诗:北京工业大学激光工程研究院高功率及超快激光先进制造实验室, 北京 100124

联系人作者:黄婷(huangting@bjut.edu.cn)

备注:国家重点研发计划;

【1】Itoh K, Watanabe W, Nolte S, et al. Ultrafast processes for bulk modification of transparent materials [J]. MRS Bulletin. 2006, 31(8): 620-625.

【2】Gattass R R, Mazur E. Femtosecond laser micromachining in transparent materials [J]. Nature Photonics. 2008, 2(4): 219-225.

【3】Xiao R S, Zhang H Z, Huang T. Recent progress in femtosecond pulsed laser processing research [J]. Journal of Mechanical Engineering. 2016, 52(17): 176-186.
肖荣诗, 张寰臻, 黄婷. 飞秒激光加工最新研究进展 [J]. 机械工程学报. 2016, 52(17): 176-186.

【4】Chen G Y, Zhu Z C, Yin J, et al. Experiment on ablation threshold of single crystal diamond produced by femtosecond laser processing [J]. Chinese Journal of Lasers. 2019, 46(4): 0402001.
陈根余, 朱智超, 殷赳, 等. 单晶金刚石飞秒激光加工的烧蚀阈值实验 [J]. 中国激光. 2019, 46(4): 0402001.

【5】Zhu X N, Bao W X. Fundamentals of ultrashort pulse laser and its applications [J]. Chinese Journal of Lasers. 2019, 46(12): 1200001.
朱晓农, 包文霞. 超短脉冲激光及其相关应用的一些基本知识 [J]. 中国激光. 2019, 46(12): 1200001.

【6】von der Linde D, Schüler H. Breakdown threshold and plasma formation in femtosecond laser-solid interaction [J]. Journal of the Optical Society of America B. 1996, 13(1): 216-222.

【7】Tamaki T, Watanabe W, Nishii J, et al. Welding of transparent materials using femtosecond laser pulses [J]. Japanese Journal of Applied Physics. 2005, 44(22): L687-L689.

【8】Watanabe W, Onda S, Tamaki T, et al. Space-selective laser joining of dissimilar transparent materials using femtosecond laser pulses [J]. Applied Physics Letters. 2006, 89(2): 021106.

【9】Miyamoto I, Cvecek K, Okamoto Y, et al. Characteristics of laser absorption and welding in FOTURAN glass by ultrashort laser pulses [J]. Optics Express. 2011, 19(23): 22961-22973.

【10】Ding T, Wang X H, Wang G D, et al. Welding of fused silica by using high repetition frequency femtosecond laser [J]. Chinese Journal of Lasers. 2018, 45(7): 0701007.
丁腾, 王雪辉, 王关德, 等. 高重频飞秒激光焊接石英玻璃 [J]. 中国激光. 2018, 45(7): 0701007.

【11】Zhang J J, Lü Q T, Guo L, et al. Process study of glass welding of a picosecond laser [J]. Applied Laser. 2016, 36(6): 716-722.
张洁娟, 吕启涛, 郭亮, 等. 皮秒激光焊接玻璃工艺的研究 [J]. 应用激光. 2016, 36(6): 716-722.

【12】Watanabe W, Onda S, Tamaki T, et al. Direct joining of glass substrates by 1 kHz femtosecond laser pulses [J]. Applied Physics B. 2006, 87(1): 85-89.

【13】Richter S, D?ring S, Tünnermann A, et al. Bonding of glass with femtosecond laser pulses at high repetition rates [J]. Applied Physics A. 2011, 103(2): 257-261.

【14】Huang H, Yang L M, Liu J. Direct welding of fused silica with femtosecond fiber laser [J]. Proceedings of SPIE. 2012, 8244: 824403.

【15】Helie D, Lacroix F, Vallee R. Reinforcing a direct bond between optical materials by filamentation based femtosecond laser welding [J]. Journal of Laser Micro Nanoengineering. 2012, 7(3): 284-292.

【16】Tamaki T, Watanabe W, Itoh K. Laser micro-welding of transparent materials by a localized heat accumulation effect using a femtosecond fiber laser at 1558 nm [J]. Optics Express. 2006, 14(22): 10460-10468.

【17】Horn A. Investigations on melting and welding of glass by ultra-short laser radiation [J]. Journal of Laser Micro. 2008, 3(2): 114-118.

【18】Cvecek K, Miyamoto I, Strauss J, et al. Sample preparation method for glass welding by ultrashort laser pulses yields higher seam strength [J]. Applied Optics. 2011, 50(13): 1941-1944.

【19】Chen J Y, Carter R M, Thomson R R, et al. Avoiding the requirement for pre-existing optical contact during picosecond laser glass-to-glass welding: erratum [J]. Optics Express. 2015, 23(21): 28104-28105.

【20】Richter S, Zimmermann F, Eberhardt R, et al. Toward laser welding of glasses without optical contacting [J]. Applied Physics A. 2015, 121(1): 1-9.

【21】Chen H, Deng L M, Duan J, et al. Picosecond laser welding of glasses with a large gap by a rapid oscillating scan [J]. Optics Letters. 2019, 44(10): 2570-2573.

【22】Miyamoto I, Horn A, Gottmann J, et al. Fusion welding of glass using femtosecond laser pulses with high-repetition rates [J]. Journal of Laser Micro/Nanoengineering. 2007, 2(1): 57-63.

引用该论文

Yu Miao,Huang Ting,Xiao Rongshi. Long Focal Length Green Femtosecond Laser Welding of Glass[J]. Chinese Journal of Lasers, 2020, 47(9): 0902005

于淼,黄婷,肖荣诗. 长焦距绿光飞秒激光玻璃焊接[J]. 中国激光, 2020, 47(9): 0902005

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF